Break out code from mmc_blk_issue_rw_rq to create a
block request prepare function. This doesn't change
any functionallity. This helps when handling more
than one active block request.
Signed-off-by: Per Forlin <per.forlin@xxxxxxxxxx>
---
drivers/mmc/card/block.c | 170 ++++++++++++++++++++++++---------------------
1 files changed, 91 insertions(+), 79 deletions(-)
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index ec4e432..e606dec 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -324,97 +324,109 @@ out:
return err ? 0 : 1;
}
-static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
+static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
+ struct mmc_card *card,
+ int disable_multi,
+ struct mmc_queue *mq)
{
- struct mmc_blk_data *md = mq->data;
- struct mmc_card *card = md->queue.card;
- struct mmc_blk_request *brq = &mq->mqrq_cur->brq;
- int ret = 1, disable_multi = 0;
+ u32 readcmd, writecmd;
+ struct mmc_blk_request *brq = &mqrq->brq;
+ struct request *req = mqrq->req;
- mmc_claim_host(card->host);
+ memset(brq, 0, sizeof(struct mmc_blk_request));
- do {
- struct mmc_command cmd;
- u32 readcmd, writecmd, status = 0;
-
- memset(brq, 0, sizeof(struct mmc_blk_request));
- brq->mrq.cmd = &brq->cmd;
- brq->mrq.data = &brq->data;
-
- brq->cmd.arg = blk_rq_pos(req);
- if (!mmc_card_blockaddr(card))
- brq->cmd.arg <<= 9;
- brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
- brq->data.blksz = 512;
- brq->stop.opcode = MMC_STOP_TRANSMISSION;
- brq->stop.arg = 0;
- brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
- brq->data.blocks = blk_rq_sectors(req);
+ brq->mrq.cmd = &brq->cmd;
+ brq->mrq.data = &brq->data;
- /*
- * The block layer doesn't support all sector count
- * restrictions, so we need to be prepared for too big
- * requests.
- */
- if (brq->data.blocks > card->host->max_blk_count)
- brq->data.blocks = card->host->max_blk_count;
+ brq->cmd.arg = blk_rq_pos(req);
+ if (!mmc_card_blockaddr(card))
+ brq->cmd.arg <<= 9;
+ brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+ brq->data.blksz = 512;
+ brq->stop.opcode = MMC_STOP_TRANSMISSION;
+ brq->stop.arg = 0;
+ brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
+ brq->data.blocks = blk_rq_sectors(req);
- /*
- * After a read error, we redo the request one sector at a time
- * in order to accurately determine which sectors can be read
- * successfully.
+ /*
+ * The block layer doesn't support all sector count
+ * restrictions, so we need to be prepared for too big
+ * requests.
+ */
+ if (brq->data.blocks > card->host->max_blk_count)
+ brq->data.blocks = card->host->max_blk_count;
+
+ /*
+ * After a read error, we redo the request one sector at a time
+ * in order to accurately determine which sectors can be read
+ * successfully.
+ */
+ if (disable_multi && brq->data.blocks > 1)
+ brq->data.blocks = 1;
+
+ if (brq->data.blocks > 1) {
+ /* SPI multiblock writes terminate using a special
+ * token, not a STOP_TRANSMISSION request.
*/
- if (disable_multi && brq->data.blocks > 1)
- brq->data.blocks = 1;
-
- if (brq->data.blocks > 1) {
- /* SPI multiblock writes terminate using a special
- * token, not a STOP_TRANSMISSION request.
- */
- if (!mmc_host_is_spi(card->host)
- || rq_data_dir(req) == READ)
- brq->mrq.stop = &brq->stop;
- readcmd = MMC_READ_MULTIPLE_BLOCK;
- writecmd = MMC_WRITE_MULTIPLE_BLOCK;
- } else {
- brq->mrq.stop = NULL;
- readcmd = MMC_READ_SINGLE_BLOCK;
- writecmd = MMC_WRITE_BLOCK;
- }
- if (rq_data_dir(req) == READ) {
- brq->cmd.opcode = readcmd;
- brq->data.flags |= MMC_DATA_READ;
- } else {
- brq->cmd.opcode = writecmd;
- brq->data.flags |= MMC_DATA_WRITE;
- }
+ if (!mmc_host_is_spi(card->host)
+ || rq_data_dir(req) == READ)
+ brq->mrq.stop = &brq->stop;
+ readcmd = MMC_READ_MULTIPLE_BLOCK;
+ writecmd = MMC_WRITE_MULTIPLE_BLOCK;
+ } else {
+ brq->mrq.stop = NULL;
+ readcmd = MMC_READ_SINGLE_BLOCK;
+ writecmd = MMC_WRITE_BLOCK;
+ }
+ if (rq_data_dir(req) == READ) {
+ brq->cmd.opcode = readcmd;
+ brq->data.flags |= MMC_DATA_READ;
+ } else {
+ brq->cmd.opcode = writecmd;
+ brq->data.flags |= MMC_DATA_WRITE;
+ }
- mmc_set_data_timeout(&brq->data, card);
+ mmc_set_data_timeout(&brq->data, card);
- brq->data.sg = mq->mqrq_cur->sg;
- brq->data.sg_len = mmc_queue_map_sg(mq, mq->mqrq_cur);
+ brq->data.sg = mqrq->sg;
+ brq->data.sg_len = mmc_queue_map_sg(mq, mqrq);
- /*
- * Adjust the sg list so it is the same size as the
- * request.
- */
- if (brq->data.blocks != blk_rq_sectors(req)) {
- int i, data_size = brq->data.blocks << 9;
- struct scatterlist *sg;
-
- for_each_sg(brq->data.sg, sg, brq->data.sg_len, i) {
- data_size -= sg->length;
- if (data_size <= 0) {
- sg->length += data_size;
- i++;
- break;
- }
+ /*
+ * Adjust the sg list so it is the same size as the
+ * request.
+ */
+ if (brq->data.blocks != blk_rq_sectors(req)) {
+ int i, data_size = brq->data.blocks << 9;
+ struct scatterlist *sg;
+
+ for_each_sg(brq->data.sg, sg, brq->data.sg_len, i) {
+ data_size -= sg->length;
+ if (data_size <= 0) {
+ sg->length += data_size;
+ i++;
+ break;
}
- brq->data.sg_len = i;
}
+ brq->data.sg_len = i;
+ }
- mmc_queue_bounce_pre(mq->mqrq_cur);
+ mmc_queue_bounce_pre(mqrq);
+}
+
+static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
+{
+ struct mmc_blk_data *md = mq->data;
+ struct mmc_card *card = md->queue.card;
+ struct mmc_blk_request *brq = &mq->mqrq_cur->brq;
+ int ret = 1, disable_multi = 0;
+
+ mmc_claim_host(card->host);
+
+ do {
+ struct mmc_command cmd;
+ u32 status = 0;
+ mmc_blk_rw_rq_prep(mq->mqrq_cur, card, disable_multi, mq);
mmc_wait_for_req(card->host, &brq->mrq);
mmc_queue_bounce_post(mq->mqrq_cur);
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
