From: Simon Horman <horms@xxxxxxxxxxxx>
Also add TMIO_BBS.
This allows these defines to also be used by zboot.
Cc: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
Signed-off-by: Simon Horman <horms@xxxxxxxxxxxx>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
---
As requested by Simon, this is now rebased on top of all my current tmio
patches.
drivers/mmc/host/tmio_mmc.h | 30 +++--------------------
drivers/mmc/host/tmio_mmc_dma.c | 1 +
drivers/mmc/host/tmio_mmc_pio.c | 21 +----------------
include/linux/mmc/tmio.h | 49 +++++++++++++++++++++++++++++++++++++++
4 files changed, 55 insertions(+), 46 deletions(-)
create mode 100644 include/linux/mmc/tmio.h
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 7d79b14..099ed49 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -17,36 +17,14 @@
#define TMIO_MMC_H
#include <linux/highmem.h>
+#include <linux/mmc/tmio.h>
#include <linux/pagemap.h>
-/* Definitions for values the CTRL_STATUS register can take. */
-#define TMIO_STAT_CMDRESPEND 0x00000001
-#define TMIO_STAT_DATAEND 0x00000004
-#define TMIO_STAT_CARD_REMOVE 0x00000008
-#define TMIO_STAT_CARD_INSERT 0x00000010
-#define TMIO_STAT_SIGSTATE 0x00000020
-#define TMIO_STAT_WRPROTECT 0x00000080
-#define TMIO_STAT_CARD_REMOVE_A 0x00000100
-#define TMIO_STAT_CARD_INSERT_A 0x00000200
-#define TMIO_STAT_SIGSTATE_A 0x00000400
-#define TMIO_STAT_CMD_IDX_ERR 0x00010000
-#define TMIO_STAT_CRCFAIL 0x00020000
-#define TMIO_STAT_STOPBIT_ERR 0x00040000
-#define TMIO_STAT_DATATIMEOUT 0x00080000
-#define TMIO_STAT_RXOVERFLOW 0x00100000
-#define TMIO_STAT_TXUNDERRUN 0x00200000
-#define TMIO_STAT_CMDTIMEOUT 0x00400000
-#define TMIO_STAT_RXRDY 0x01000000
-#define TMIO_STAT_TXRQ 0x02000000
-#define TMIO_STAT_ILL_FUNC 0x20000000
-#define TMIO_STAT_CMD_BUSY 0x40000000
-#define TMIO_STAT_ILL_ACCESS 0x80000000
-
/* Definitions for values the CTRL_SDIO_STATUS register can take. */
-#define TMIO_SDIO_STAT_IOIRQ 0x0001
+#define TMIO_SDIO_STAT_IOIRQ 0x0001
#define TMIO_SDIO_STAT_EXPUB52 0x4000
-#define TMIO_SDIO_STAT_EXWT 0x8000
-#define TMIO_SDIO_MASK_ALL 0xc007
+#define TMIO_SDIO_STAT_EXWT 0x8000
+#define TMIO_SDIO_MASK_ALL 0xc007
/* Define some IRQ masks */
/* This is the mask used at reset by the chip */
diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c
index c505278..d3de74a 100644
--- a/drivers/mmc/host/tmio_mmc_dma.c
+++ b/drivers/mmc/host/tmio_mmc_dma.c
@@ -14,6 +14,7 @@
#include <linux/dmaengine.h>
#include <linux/mfd/tmio.h>
#include <linux/mmc/host.h>
+#include <linux/mmc/tmio.h>
#include <linux/pagemap.h>
#include <linux/scatterlist.h>
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index e35e179..6ae8d2f 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -35,6 +35,7 @@
#include <linux/irq.h>
#include <linux/mfd/tmio.h>
#include <linux/mmc/host.h>
+#include <linux/mmc/tmio.h>
#include <linux/module.h>
#include <linux/pagemap.h>
#include <linux/platform_device.h>
@@ -44,26 +45,6 @@
#include "tmio_mmc.h"
-#define CTL_SD_CMD 0x00
-#define CTL_ARG_REG 0x04
-#define CTL_STOP_INTERNAL_ACTION 0x08
-#define CTL_XFER_BLK_COUNT 0xa
-#define CTL_RESPONSE 0x0c
-#define CTL_STATUS 0x1c
-#define CTL_IRQ_MASK 0x20
-#define CTL_SD_CARD_CLK_CTL 0x24
-#define CTL_SD_XFER_LEN 0x26
-#define CTL_SD_MEM_CARD_OPT 0x28
-#define CTL_SD_ERROR_DETAIL_STATUS 0x2c
-#define CTL_SD_DATA_PORT 0x30
-#define CTL_TRANSACTION_CTL 0x34
-#define CTL_SDIO_STATUS 0x36
-#define CTL_SDIO_IRQ_MASK 0x38
-#define CTL_RESET_SD 0xe0
-#define CTL_SDIO_REGS 0x100
-#define CTL_CLK_AND_WAIT_CTL 0x138
-#define CTL_RESET_SDIO 0x1e0
-
static u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr)
{
return readw(host->ctl + (addr << host->bus_shift));
diff --git a/include/linux/mmc/tmio.h b/include/linux/mmc/tmio.h
new file mode 100644
index 0000000..7131f8d
--- /dev/null
+++ b/include/linux/mmc/tmio.h
@@ -0,0 +1,49 @@
+#ifndef TMIO_H
+#define TMIO_H
+
+#define CTL_SD_CMD 0x00
+#define CTL_ARG_REG 0x04
+#define CTL_STOP_INTERNAL_ACTION 0x08
+#define CTL_XFER_BLK_COUNT 0xa
+#define CTL_RESPONSE 0x0c
+#define CTL_STATUS 0x1c
+#define CTL_IRQ_MASK 0x20
+#define CTL_SD_CARD_CLK_CTL 0x24
+#define CTL_SD_XFER_LEN 0x26
+#define CTL_SD_MEM_CARD_OPT 0x28
+#define CTL_SD_ERROR_DETAIL_STATUS 0x2c
+#define CTL_SD_DATA_PORT 0x30
+#define CTL_TRANSACTION_CTL 0x34
+#define CTL_SDIO_STATUS 0x36
+#define CTL_SDIO_IRQ_MASK 0x38
+#define CTL_RESET_SD 0xe0
+#define CTL_SDIO_REGS 0x100
+#define CTL_CLK_AND_WAIT_CTL 0x138
+#define CTL_RESET_SDIO 0x1e0
+
+/* Definitions for values the CTRL_STATUS register can take. */
+#define TMIO_STAT_CMDRESPEND 0x00000001
+#define TMIO_STAT_DATAEND 0x00000004
+#define TMIO_STAT_CARD_REMOVE 0x00000008
+#define TMIO_STAT_CARD_INSERT 0x00000010
+#define TMIO_STAT_SIGSTATE 0x00000020
+#define TMIO_STAT_WRPROTECT 0x00000080
+#define TMIO_STAT_CARD_REMOVE_A 0x00000100
+#define TMIO_STAT_CARD_INSERT_A 0x00000200
+#define TMIO_STAT_SIGSTATE_A 0x00000400
+#define TMIO_STAT_CMD_IDX_ERR 0x00010000
+#define TMIO_STAT_CRCFAIL 0x00020000
+#define TMIO_STAT_STOPBIT_ERR 0x00040000
+#define TMIO_STAT_DATATIMEOUT 0x00080000
+#define TMIO_STAT_RXOVERFLOW 0x00100000
+#define TMIO_STAT_TXUNDERRUN 0x00200000
+#define TMIO_STAT_CMDTIMEOUT 0x00400000
+#define TMIO_STAT_RXRDY 0x01000000
+#define TMIO_STAT_TXRQ 0x02000000
+#define TMIO_STAT_ILL_FUNC 0x20000000
+#define TMIO_STAT_CMD_BUSY 0x40000000
+#define TMIO_STAT_ILL_ACCESS 0x80000000
+
+#define TMIO_BBS 512 /* Boot block size */
+
+#endif
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
