The power-mode sequence on MMC is MMC_POWER_OFF -> MMC_POWER_UP ->
MMC_POWER_ON and not MMC_POWER_ON -> MMC_POWER_UP, as the driver currently
is implying.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
---
Please, test on MFD!
V2: rebase on top of driver split
drivers/mmc/host/tmio_mmc_pio.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index e1aed25..69772ab 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -746,20 +746,20 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
if (ios->clock)
tmio_mmc_set_clock(host, ios->clock);
- /* Power sequence - OFF -> ON -> UP */
+ /* Power sequence - OFF -> UP -> ON */
switch (ios->power_mode) {
case MMC_POWER_OFF: /* power down SD bus */
if (host->set_pwr)
host->set_pwr(host->pdev, 0);
tmio_mmc_clk_stop(host);
break;
- case MMC_POWER_ON: /* power up SD bus */
+ case MMC_POWER_ON: /* start bus clock */
+ tmio_mmc_clk_start(host);
+ break;
+ case MMC_POWER_UP: /* power up SD bus */
if (host->set_pwr)
host->set_pwr(host->pdev, 1);
break;
- case MMC_POWER_UP: /* start bus clock */
- tmio_mmc_clk_start(host);
- break;
}
switch (ios->bus_width) {
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
