> > nothing negative but reset is meant to reinit the card. This is the power up sequence for the 1st > time a card is detected. > There is no reason to do this if no card has yet enumerated. If a sdio card was there I completely > agree with the mod since we need to reset > the card. What about using linux as a bootloader, or just using kexec? The first linux could have initialized the card, and we want to put everything back to known state. This is a valid reason why you want to make sure to reset the card at the first place. Regards, Pierre --------------------------------------------------------------------- Intel Corporation SAS (French simplified joint stock company) Registered headquarters: "Les Montalets"- 2, rue de Paris, 92196 Meudon Cedex, France Registration Number: 302 456 199 R.C.S. NANTERRE Capital: 4,572,000 Euros This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
