Hi Philip,
On Fri, Feb 04, 2011 at 02:53:59PM -0800, Philip Rakity wrote:
> using mmc-next -- NO changes -- last checkin was from linux Jan 26
[..]
> [ 2.034998] mmc0: starting CMD52 arg 00000c00 flags 00000195
> [ 2.052704] Waiting 15sec before mounting root device...
> [ 2.068948] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00018000
> [ 2.087707] mmc0: req done (CMD52): -110: 00000000 00000000 00000000 00000000
> [ 2.109069] mmc0: starting CMD52 arg 80000c08 flags 00000195
> [ 2.126291] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00018000
> [ 2.145002] mmc0: req done (CMD52): -110: 00000000 00000000 00000000 00000000
> [ 2.166321] mmc0: clock 400000Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0 timing 0
> [ 2.190178] mmc0: starting CMD0 arg 00000000 flags 000000c0
> [ 2.206971] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
> [ 2.225689] mmc0: req done (CMD0): 0: 00000000 00000000 00000000 00000000
This looks to be intentional, and dates back to:
commit 516a82422209e078345d0ca54b16793d7bfd4782
Author: Albert Herranz <albert_herranz@xxxxxxxx>
Date: Wed Mar 10 15:20:37 2010 -0800
sdio: recognize io card without powercycle
SDIO Simplified Specification V2.00 states that it is strongly recommended
that the host executes either a power reset or issues a CMD52 (I/O Reset)
to re-initialize an I/O only card or the I/O portion of a combo card.
Additionally, the CMD52 must be issued first because it cannot be issued
after a CMD0.
With this patch the Nintendo Wii SDIO-based WLAN card is detected after a
system reset, without requiring a complete system powercycle.
Are you seeing any negative effects from running the CMD52 before CMD0?
Thanks,
--
Chris Ball <cjb@xxxxxxxxxx> <http://printf.net/>
One Laptop Per Child
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
