Re: [PATCH V3 1/1]MMC: add support of sdhci-pxa driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2010/10/24 Marek Vasut <marek.vasut@xxxxxxxxx>:
> Dne Ne 24. října 2010 05:26:38 zhangfei gao napsal(a):
>> On Sun, Oct 24, 2010 at 1:50 AM, Marek Vasut <marek.vasut@xxxxxxxxx> wrote:
>> > Dne So 23. října 2010 18:47:10 zhangfei gao napsal(a):
>> >> On Sat, Oct 23, 2010 at 10:24 PM, Marek Vasut <marek.vasut@xxxxxxxxx>
> wrote:
>> >> >> +/*******************************************************************
>> >> >> *** *** ****\ + *
>> >> >>         * + * Device probing/removal
>> >> >>              * + *
>> >> >>                   *
>> >> >> +\*******************************************************************
>> >> >> *** ** *****/ +
>> >> >> +static int __devinit sdhci_pxa_probe(struct platform_device *pdev)
>> >> >> +{
>> >> >> +     struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
>> >> >> +     struct device *dev = &pdev->dev;
>> >> >> +     struct sdhci_host *host = NULL;
>> >> >> +     struct resource *iomem = NULL;
>> >> >> +     struct sdhci_pxa *pxa = NULL;
>> >> >> +     int ret, irq;
>> >> >> +
>> >> >> +     irq = platform_get_irq(pdev, 0);
>> >> >> +     if (irq < 0) {
>> >> >> +             dev_err(dev, "no irq specified\n");
>> >> >> +             return irq;
>> >> >> +     }
>> >> >> +
>> >> >> +     iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> >> >> +     if (!iomem) {
>> >> >> +             dev_err(dev, "no memory specified\n");
>> >> >> +             return -ENOENT;
>> >> >> +     }
>> >> >> +
>> >> >> +     host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pxa));
>> >> >> +     if (IS_ERR(host)) {
>> >> >> +             dev_err(dev, "failed to alloc host\n");
>> >> >> +             return PTR_ERR(host);
>> >> >> +     }
>> >> >> +
>> >> >> +     pxa = sdhci_priv(host);
>> >> >> +     pxa->host = host;
>> >> >> +     pxa->pdata = pdata;
>> >> >> +     pxa->clk_enable = 0;
>> >> >> +
>> >> >> +     pxa->clk = clk_get(dev, "PXA-SDHCLK");
>> >> >> +     if (IS_ERR(pxa->clk)) {
>> >> >> +             dev_err(dev, "failed to get io clock\n");
>> >> >> +             ret = PTR_ERR(pxa->clk);
>> >> >> +             goto out;
>> >> >> +     }
>> >> >> +
>> >> >> +     pxa->res = request_mem_region(iomem->start,
>> >> >> resource_size(iomem), +             mmc_hostname(host->mmc));
>> >> >> +     if (!pxa->res) {
>> >> >> +             dev_err(&pdev->dev, "cannot request region\n");
>> >> >> +             ret = -EBUSY;
>> >> >> +             goto out;
>> >> >> +     }
>> >> >> +
>> >> >> +     host->ioaddr = ioremap(iomem->start, resource_size(iomem));
>> >> >> +     if (!host->ioaddr) {
>> >> >> +             dev_err(&pdev->dev, "failed to remap registers\n");
>> >> >> +             ret = -ENOMEM;
>> >> >> +             goto out;
>> >> >> +     }
>> >> >> +
>> >> >> +     host->hw_name = "MMC";
>> >> >> +     host->ops = &sdhci_pxa_ops;
>> >> >> +     host->irq = irq;
>> >> >> +     host->quirks = SDHCI_QUIRK_BROKEN_ADMA |
>> >> >> SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; +
>> >> >
>> >> > Maybe check if these aren't already set in pdata and warn user ?
>> >>
>> >> Here pdata->quirks only provide specific quirk like
>> >> SDHCI_QUIRK_BROKEN_CARD_DETECTION for on-chip device, the common quirk
>> >> is provided above.
>> >
>> > Right, but what if the user also provides such a quirk? It's unnecessary
>> > ... and in case the quirk was removed from here later, it'd have to be
>> > removed from user's code too ...
>>
>> What do you mean 'in case the quirk was removed from here later'.
>
> I mean ... if setting the quirk was removed from the driver source, it'd have to
> be removed from user code that uses the driver as well -- in case user also set
> such a quirk in pdata->quirks. So it might be a good idea to warn user that he's
> setting something that's getting set elsewhere (in the driver) anyway.

Thanks for suggestion, but I think it is OK here.
In our design, driver set common limitation quirk, and pdata set
specific quirk for some device.

>
>> SDHCI_QUIRK_* is just move from drivers/mmc/host/sdhci.h to
>> include/linux/mmc/sdhci.h, so code in arch/arm could access them
>> directly.
>>
>> We also consider use one flag here, like sdhci-s3c.c.
>> Code like this,
>> if (pdata->flags & PXA_FLAG_CARD_PERMENT)
>>      host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
>>
>> If SDHCI_QUIRK_* not permitted to access, it would be better to use this
>> method.
>>
>> >> In sdhci-s3c, host->quirks is modified here via pdata->cd_type, which
>> >> is also a good method.
>> >> Here we transfer SDHCI_QUIRK_BROKEN_CARD_DETECTION directly from pdata
>> >> since it already move to include folder.
>> >>
>> >> >> +     if (pdata->quirks)
>> >> >> +             host->quirks |= pdata->quirks;
>> >> >> +
>> >> >> +     ret = sdhci_add_host(host);
>> >> >> +     if (ret) {
>> >> >> +             dev_err(&pdev->dev, "failed to add host\n");
>> >> >> +             goto out;
>> >> >> +     }
>> >> >> +
>> >> >> +     if (pxa->pdata->max_speed)
>> >> >> +             host->mmc->f_max = pxa->pdata->max_speed;
>> >> >
>> >> > What happens otherwise ?
>> >>
>> >> Otherwise, host->mmc->f_max = host->max_clk set in sdhci_add_host,
>> >> host->max_clk is 50M in 2.0 controller, and 200M in 3.0 controller, if
>> >> controller does not need to provide get_max_clock.
>> >> it's better add defalut value in else condition.
>> >
>> > Thanks for clearing this
>> >
>> >> Thanks Marek for review.
>> >>
>> >> >> +
>> >> >> +     platform_set_drvdata(pdev, host);
>> >> >> +
>> >> >> +     return 0;
>> >> >> +out:
>> >> >> +     if (host) {
>> >> >> +             clk_put(pxa->clk);
>> >> >> +             if (host->ioaddr)
>> >> >> +                     iounmap(host->ioaddr);
>> >> >> +             if (pxa->res)
>> >> >> +                     release_mem_region(pxa->res->start,
>> >> >> +                                     resource_size(pxa->res));
>> >> >> +             sdhci_free_host(host);
>> >> >> +     }
>> >> >> +
>> >> >> +     return ret;
>> >> >> +}
>> >> >> +
>> >> >
>> >> > Thanks!
>> >> >
>> >> > Cheers
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux