Hi, On Tue, Aug 24, 2010 at 01:30:45PM +0300, Adrian Hunter wrote: > From: Adrian Hunter <adrian.hunter@xxxxxxxxx> > Date: Tue, 24 Aug 2010 13:20:26 +0300 > Subject: [PATCH] mmc: Fix Dual Data Rate (DDR) support > > The DDR support patch needs the following fixes: > > - The block driver does not need to know about DDR, any more > than it needs to know about bus width. > - Not only the card must be switched to DDR mode. The host > controller must also be configured, which is done through > the 'set_ios()' function. > - Do not set the DDR mode state until after the switch command > is successful. > - Setting block length is not supported in DDR mode. Make that > a core function and change the other place it is used (mmc_test) > also. > > Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx> Applied to mmc-next, thanks very much Adrian. -- Chris Ball <cjb@xxxxxxxxxx> <http://printf.net/> One Laptop Per Child -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
