On Tue, Sep 28, 2010 at 10:04:14AM -0400, zhangfei gao wrote:
> On Tue, Sep 28, 2010 at 8:36 AM, Wolfram Sang <w.sang@xxxxxxxxxxxxxx> wrote:
> > This driver adds basic support for the esdhc-core found on e.g.
> > imx35/51. It adds up to the pltfm-core.
> >
> > Signed-off-by: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
> > ---
> >
> > Changes since last version:
> >
> > * some "-imx" suffixes added
> > * some cosmetic improvements
> >
> > Thanks to Anton for those.
> >
> > drivers/mmc/host/Kconfig | 10 +++
> > drivers/mmc/host/Makefile | 1 +
> > drivers/mmc/host/sdhci-esdhc-imx.c | 144 ++++++++++++++++++++++++++++++++++++
> > drivers/mmc/host/sdhci-pltfm.c | 3 +
> > drivers/mmc/host/sdhci-pltfm.h | 1 +
> > 5 files changed, 159 insertions(+), 0 deletions(-)
> > create mode 100644 drivers/mmc/host/sdhci-esdhc-imx.c
> >
> > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> > index 6f12d5d..815bf0f 100644
> > --- a/drivers/mmc/host/Kconfig
> > +++ b/drivers/mmc/host/Kconfig
> > @@ -143,6 +143,16 @@ config MMC_SDHCI_MV
> >
> > If unsure, say N.
> >
> > +config MMC_SDHCI_ESDHC
> > + bool "SDHCI platform support for the Freescale eSDHC controller"
> > + depends on MMC_SDHCI_PLTFM
> > + select MMC_SDHCI_IO_ACCESSORS
> > + help
> > + This selects the Freescale eSDHC controller support on the platform
> > + bus, found on platforms like mx35/51.
> > +
> > + If unsure, say N.
> > +
> > config MMC_SDHCI_S3C
> > tristate "SDHCI support on Samsung S3C SoC"
> > depends on MMC_SDHCI && PLAT_SAMSUNG
> > diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> > index ef32c32..5294425 100644
> > --- a/drivers/mmc/host/Makefile
> > +++ b/drivers/mmc/host/Makefile
> > @@ -38,6 +38,7 @@ obj-$(CONFIG_MMC_USHC) += ushc.o
> > obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-platform.o
> > sdhci-platform-y := sdhci-pltfm.o
> > sdhci-platform-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o
> > +sdhci-platform-$(CONFIG_MMC_SDHCI_ESDHC) += sdhci-esdhc-imx.o
> >
> > obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o
> > sdhci-of-y := sdhci-of-core.o
> > diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
> > new file mode 100644
> > index 0000000..c43d448
> > --- /dev/null
> > +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
> > @@ -0,0 +1,144 @@
> > +/*
> > + * Freescale eSDHC controller driver for the platform bus.
> > + *
> > + * derived from the OF-version.
> > + *
> > + * Copyright (c) 2010 Pengutronix e.K.
> > + * Author: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License.
> > + */
> > +
> > +#include <linux/io.h>
> > +#include <linux/delay.h>
> > +#include <linux/err.h>
> > +#include <linux/clk.h>
> > +#include <linux/mmc/host.h>
> > +#include <linux/mmc/sdhci-pltfm.h>
> > +#include "sdhci.h"
> > +#include "sdhci-pltfm.h"
> > +#include "sdhci-esdhc.h"
> > +
> > +static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg)
> > +{
> > + void __iomem *base = host->ioaddr + (reg & ~0x3);
> > + u32 shift = (reg & 0x3) * 8;
> > +
> > + writel(((readl(base) & ~(mask << shift)) | (val << shift)), base);
> > +}
> > +
> > +static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
> > +{
> > + if (unlikely(reg == SDHCI_HOST_VERSION))
> > + reg ^= 2;
> > +
> > + return readw(host->ioaddr + reg);
> > +}
> > +
> > +static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
> > +{
> > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> > +
> > + switch (reg) {
> > + case SDHCI_TRANSFER_MODE:
> > + /*
> > + * Postpone this write, we must do it together with a
> > + * command write that is down below.
> > + */
> > + pltfm_host->scratchpad = val;
> > + return;
> > + case SDHCI_COMMAND:
> > + writel(val << 16 | pltfm_host->scratchpad,
> > + host->ioaddr + SDHCI_TRANSFER_MODE);
> > + return;
> > + case SDHCI_BLOCK_SIZE:
> > + val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
> > + break;
> > + }
> > + esdhc_clrset_le(host, 0xffff, val, reg);
> > +}
> > +
> > +static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
> > +{
> > + u32 new_val;
> > +
> > + switch (reg) {
> > + case SDHCI_POWER_CONTROL:
> > + /*
> > + * FSL put some DMA bits here
> > + * If your board has a regulator, code should be here
> > + */
> > + return;
> > + case SDHCI_HOST_CONTROL:
> > + /* FSL messed up here, so we can just keep those two */
> > + new_val = val & (SDHCI_CTRL_LED | SDHCI_CTRL_4BITBUS);
> > + /* ensure the endianess */
> > + new_val |= ESDHC_HOST_CONTROL_LE;
> > + /* DMA mode bits are shifted */
> > + new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;
> > +
> > + esdhc_clrset_le(host, 0xffff, new_val, reg);
> > + return;
> > + }
> > + esdhc_clrset_le(host, 0xff, val, reg);
> > +}
> > +
> > +static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)
> > +{
> > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> > +
> > + return clk_get_rate(pltfm_host->clk);
> > +}
> > +
> > +static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
> > +{
> > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> > +
> > + return clk_get_rate(pltfm_host->clk) / 256 / 16;
> > +}
the above always confuses me, how about a / (b * c) or similar?
> > +static int esdhc_pltfm_init(struct sdhci_host *host,
> > + struct sdhci_pltfm_data *pdata, void *priv_pdata)
> > +{
> > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> > + struct clk *clk;
> > +
> > + clk = clk_get(NULL, "sdhc");
>
> Here only could support one device, how about several device, for
> example sdhc.0, sdhc.1 sdhc.2, if using this method, they will get the
> first clock.
> Then sdhc.1 sdhc.2 can not work.
No, clk_get() should be passed the device and a NULL for preference.
The main match should be made on the device, and the name is an optional
distinguisher for devices that have multiple clock sources.
> > --- a/drivers/mmc/host/sdhci-pltfm.c
> > +++ b/drivers/mmc/host/sdhci-pltfm.c
> > @@ -169,6 +169,9 @@ static const struct platform_device_id sdhci_pltfm_ids[] = {
> > #ifdef CONFIG_MMC_SDHCI_CNS3XXX
> > { "sdhci-cns3xxx", (kernel_ulong_t)&sdhci_cns3xxx_pdata },
> > #endif
> > +#ifdef CONFIG_MMC_SDHCI_ESDHC
> > + { "sdhci-esdhc-imx", (kernel_ulong_t)&sdhci_esdhc_imx_pdata },
> > +#endif
> > { },
I'd much prefer to see these outside of the sdhci-pltfm.c, this sort of
#ifdef went out of other drivers with the end of the caveman.
My preference would be to rework the sdhci-pltfm.c to be the 'core'
implementation called by each driver. I'll have a look at posting
some patches to see what can be done to sort this out.
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
