This is a patch series adding support for the esdhc-controller as a platform
device which can be found on e.g. mx35/51. It was tested using a mx35-based
Phytec pcm043. This is still a WIP! ADMA2 is not supported so far (mx35 just
has ADMA1 which is not supported by the core?) I will see if I can grab a
mx51-board later.
The following changes since commit 2bfc96a127bc1cc94d26bfaa40159966064f9c8c:
Linux 2.6.36-rc3 (2010-08-29 08:36:04 -0700)
are available in the git repository at:
git://git.pengutronix.de/git/wsa/linux-2.6.git pcm043-mmc
Wolfram Sang (3):
sdhci-pltfm: Add structure for host-specific data
mmc: add driver for imx35/51
pcm043: add resources for mmc
arch/arm/mach-mx3/mach-pcm043.c | 29 ++++++
drivers/mmc/host/Kconfig | 9 ++
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/sdhci-esdhc.c | 194 +++++++++++++++++++++++++++++++++++++++
drivers/mmc/host/sdhci-pltfm.c | 10 ++-
drivers/mmc/host/sdhci-pltfm.h | 6 +
6 files changed, 247 insertions(+), 2 deletions(-)
create mode 100644 drivers/mmc/host/sdhci-esdhc.c
Regards,
Wolfram
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
