<snip>
> >> > arch/arm/mach-omap2/board-4430sdp.c | 7 +++-
> >> > drivers/mfd/twl6030-irq.c | 76
> >> +++++++++++++++++++++++++++++++++++
> >> > drivers/mmc/host/omap_hsmmc.c | 4 +-
> >> > include/linux/i2c/twl.h | 16 +++++++
> >> > 4 files changed, 100 insertions(+), 3 deletions(-)
> >> >
> >> > diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-
> >> omap2/board-4430sdp.c
> >> > index f287461..388b96d 100644
> >> > --- a/arch/arm/mach-omap2/board-4430sdp.c
> >> > +++ b/arch/arm/mach-omap2/board-4430sdp.c
> >> > @@ -227,9 +227,14 @@ static int omap4_twl6030_hsmmc_late_init(struct
> >> device *dev)
> >> > struct omap_mmc_platform_data *pdata = dev->platform_data;
> >> >
> >> > /* Setting MMC1 Card detect Irq */
> >> > - if (pdev->id == 0)
> >> > + if (pdev->id == 0) {
> >> > + ret = twl6030_mmc_card_detect_config();
> >> > + if (ret)
> >> > + pr_err("Failed configuring MMC1 card
> detect\n");
> >> > pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
> >> > MMCDETECT_INTR_OFFSET;
> >> > + pdata->slots[0].card_detect =
> twl6030_mmc_card_detect;
You are assigning an exported fn here.
What if somebody disables CONFIG_TWL4030_CORE in the omap_4430sdp_defconfig
file? Does the driver behave nicely with only loosing the hotplug
capability?
Regards,
Madhu
> >> > + }
> >> > return ret;
> >> > }
> >> >
> >> > diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
> >> > index 10bf228..c027692 100644
> >> > --- a/drivers/mfd/twl6030-irq.c
> >> > +++ b/drivers/mfd/twl6030-irq.c
> >> > @@ -36,6 +36,7 @@
> >> > #include <linux/irq.h>
> >> > #include <linux/kthread.h>
> >> > #include <linux/i2c/twl.h>
> >> > +#include <linux/platform_device.h>
> >> >
> >> > /*
> >> > * TWL6030 (unlike its predecessors, which had two level interrupt
> >> handling)
> >> > @@ -223,6 +224,81 @@ int twl6030_interrupt_mask(u8 bit_mask, u8
> offset)
> >> > }
> >> > EXPORT_SYMBOL(twl6030_interrupt_mask);
> >> >
> >> > +int twl6030_mmc_card_detect_config(void)
> >> > +{
> >> > + int ret;
> >> > + u8 reg_val = 0;
> >> > +
> >> > + /* Unmasking the Card detect Interrupt line for MMC1 from
> >> Phoenix */
> >> > + if (twl_class_is_6030()) {
> >> > + twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
> >> > +
> >> REG_INT_MSK_LINE_B);
> >> > + twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
> >> > +
> >> REG_INT_MSK_STS_B);
> >> > + }
> >> > +
> >> > + /*
> >> > + * Intially Configuring MMC_CTRL for receving interrupts &
> >> > + * Card status on TWL6030 for MMC1
> >> > + */
> >> > + ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val,
> >> TWL6030_MMCCTRL);
> >> > + if (ret < 0) {
> >> > + pr_err("twl6030: Failed to read MMCCTRL, error %d\n",
> >> ret);
> >> > + return ret;
> >> > + }
> >> > + reg_val &= ~VMMC_AUTO_OFF;
> >> > + reg_val |= SW_FC;
> >> > + ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val,
> >> TWL6030_MMCCTRL);
> >> > + if (ret < 0) {
> >> > + return ret;
> >> > + pr_err("twl6030: Failed to write MMCCTRL, error
> %d\n",
> >> ret);
> >> > + }
> >> > +
> >> > + /* Configuring PullUp-PullDown register */
> >> > + ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val,
> >> > +
> >> TWL6030_CFG_INPUT_PUPD3);
> >> > + if (ret < 0) {
> >> > + return ret;
> >> > + pr_err("twl6030: Failed to read CFG_INPUT_PUPD3,
> error
> >> %d\n",
> >> > +
> >> ret);
> >> > + }
> >> > + reg_val &= ~(MMC_PU | MMC_PD);
> >> > + ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val,
> >> > +
> >> TWL6030_CFG_INPUT_PUPD3);
> >> > + if (ret < 0) {
> >> > + pr_err("twl6030: Failed to write CFG_INPUT_PUPD3,
> error
> >> %d\n",
> >> > +
> >> ret);
> >> > + return ret;
> >> > + }
> >> > + return 0;
> >> > +}
> >> > +EXPORT_SYMBOL(twl6030_mmc_card_detect_config);
> >> > +
> >> > +int twl6030_mmc_card_detect(struct device *dev, int slot)
> >> > +{
> >> > + int ret = -EIO;
> >> > + u8 read_reg;
> >> > + struct platform_device *pdev = container_of(dev,
> >> > + struct platform_device, dev);
> >> > +
> >> > + switch (pdev->id) {
> >> > + case 0:
> >> > + /*
> >> > + * BIT0 of REG_MMC_CTRL
> >> > + * 0 - Card not present ,1 - Card present
> >> > + */
> >> > + ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &read_reg,
> >> > +
> >> TWL6030_MMCCTRL);
> >> > + if (ret >= 0)
> >> > + ret = read_reg & STS_MMC;
> >> > + break;
> >> > + default:
> >> > + pr_err("Unkown MMC controller %d in %s\n", pdev->id,
> >> __func__);
> >> > + }
> >> > + return ret;
> >> > +}
> >> > +EXPORT_SYMBOL(twl6030_mmc_card_detect);
> >> > +
> >> > int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned
> irq_end)
> >> > {
> >> >
> >> > diff --git a/drivers/mmc/host/omap_hsmmc.c
> >> b/drivers/mmc/host/omap_hsmmc.c
> >> > index b032828..c047b13 100644
> >> > --- a/drivers/mmc/host/omap_hsmmc.c
> >> > +++ b/drivers/mmc/host/omap_hsmmc.c
> >> > @@ -464,8 +464,6 @@ static int omap_hsmmc_gpio_init(struct
> >> omap_mmc_platform_data *pdata)
> >> > int ret;
> >> >
> >> > if (gpio_is_valid(pdata->slots[0].switch_pin)) {
> >> > - pdata->suspend = omap_hsmmc_suspend_cdirq;
> >> > - pdata->resume = omap_hsmmc_resume_cdirq;
> >> > if (pdata->slots[0].cover)
> >> > pdata->slots[0].get_cover_state =
> >> > omap_hsmmc_get_cover_state;
> >> > @@ -2170,6 +2168,8 @@ static int __init omap_hsmmc_probe(struct
> >> platform_device *pdev)
> >> > "Unable to grab MMC CD IRQ\n");
> >> > goto err_irq_cd;
> >> > }
> >> > + pdata->suspend = omap_hsmmc_suspend_cdirq;
> >> > + pdata->resume = omap_hsmmc_resume_cdirq;
> >> > }
> >> >
> >> > omap_hsmmc_disable_irq(host);
> >> > diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
> >> > index 6de90bf..9493292 100644
> >> > --- a/include/linux/i2c/twl.h
> >> > +++ b/include/linux/i2c/twl.h
> >> > @@ -141,6 +141,16 @@
> >> > #define TWL6030_CHARGER_CTRL_INT_MASK 0x10
> >> > #define TWL6030_CHARGER_FAULT_INT_MASK 0x60
> >> >
> >> > +#define TWL6030_MMCCTRL 0xEE
> >> > +#define VMMC_AUTO_OFF (0x1 << 3)
> >> > +#define SW_FC (0x1 << 2)
> >> > +#define STS_MMC 0x1
> >> > +
> >> > +#define TWL6030_CFG_INPUT_PUPD3 0xF2
> >> > +#define MMC_PU (0x1 << 3)
> >> > +#define MMC_PD (0x1 << 2)
> >> > +
> >> > +
> >> >
> >> > #define TWL4030_CLASS_ID 0x4030
> >> > #define TWL6030_CLASS_ID 0x6030
> >> > @@ -173,6 +183,12 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg,
> >> unsigned num_bytes);
> >> > int twl6030_interrupt_unmask(u8 bit_mask, u8 offset);
> >> > int twl6030_interrupt_mask(u8 bit_mask, u8 offset);
> >> >
> >> > +/* Card detect Configuration for MMC1 Controller on OMAP4 */
> >> > +int twl6030_mmc_card_detect_config(void);
> >> > +
> >> > +/* MMC1 Controller on OMAP4 uses Phoenix irq for Card detect */
> >> > +int twl6030_mmc_card_detect(struct device *dev, int slot);
> >> > +
> >> > /*------------------------------------------------------------------
> ---
> >> -*/
> >> >
> >> > /*
> >> > --
> >> > 1.6.3.3
> >> >
> >> > --
> >> > To unsubscribe from this list: send the line "unsubscribe linux-mmc"
> in
> >> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> >> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >> >
> >
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
