> -----Original Message----- > From: kishore kadiyala [mailto:kishorek.kadiyala@xxxxxxxxx] > Sent: Monday, August 02, 2010 9:33 AM > To: Andrew Morton > Cc: linux-mmc@xxxxxxxxxxxxxxx; linux-omap@xxxxxxxxxxxxxxx; > tony@xxxxxxxxxxx; madhu.cr@xxxxxx; adrian.hunter@xxxxxxxxx > Subject: Re: [PATCH v6] OMAP4 HSMMC: Adding Card detect support for MMC1 > on OMAP4 > > Andrew, > > Can this patch be taken now as there are no comments. > > Regards, > Kishore > Kishore, As Andrew mentioned some time back this series has to go through Linux-omap. Tony had a comment on the below first patch in the series. [PATCH v5 1/2] OMAP HSMMC: Adding a Flag to determine the type of Card detect How is the NON-GPIO card detect handled now? Is the above patch not needed anymore? Regards, Madhu > On Wed, Jul 7, 2010 at 7:42 PM, kishore kadiyala > <kishore.kadiyala@xxxxxx> wrote: > > Adding card detect callback function and card detect configuration > > function for MMC1 Controller. > > > > Card detect configuration function does initial configuration of the > > MMC Control & PullUp-PullDown registers of Phoenix. > > > > For MMC1 Controller, Card detect interrupt source is > > twl6030 and the card detect call back function provides card > present/absent > > status by reading MMC Control register. > > > > Signed-off-by: Kishore Kadiyala <kishore.kadiyala@xxxxxx> > > Cc: Tony Lindgren <tony@xxxxxxxxxxx> > > Cc: Madhusudhan Chikkature <madhu.cr@xxxxxx> > > Cc: Adrian Hunter <adrian.hunter@xxxxxxxxx> > > --- > > V5: > > https://patchwork.kernel.org/patch/106697/ > > https://patchwork.kernel.org/patch/106698/ > > V4: > > http://www.mail-archive.com/linux- > mmc@xxxxxxxxxxxxxxx/msg01958.html > > http://www.mail-archive.com/linux- > mmc@xxxxxxxxxxxxxxx/msg01949.html > > > > > > arch/arm/mach-omap2/board-4430sdp.c | 7 +++- > > drivers/mfd/twl6030-irq.c | 76 > +++++++++++++++++++++++++++++++++++ > > drivers/mmc/host/omap_hsmmc.c | 4 +- > > include/linux/i2c/twl.h | 16 +++++++ > > 4 files changed, 100 insertions(+), 3 deletions(-) > > > > diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach- > omap2/board-4430sdp.c > > index f287461..388b96d 100644 > > --- a/arch/arm/mach-omap2/board-4430sdp.c > > +++ b/arch/arm/mach-omap2/board-4430sdp.c > > @@ -227,9 +227,14 @@ static int omap4_twl6030_hsmmc_late_init(struct > device *dev) > > struct omap_mmc_platform_data *pdata = dev->platform_data; > > > > /* Setting MMC1 Card detect Irq */ > > - if (pdev->id == 0) > > + if (pdev->id == 0) { > > + ret = twl6030_mmc_card_detect_config(); > > + if (ret) > > + pr_err("Failed configuring MMC1 card detect\n"); > > pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE + > > MMCDETECT_INTR_OFFSET; > > + pdata->slots[0].card_detect = twl6030_mmc_card_detect; > > + } > > return ret; > > } > > > > diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c > > index 10bf228..c027692 100644 > > --- a/drivers/mfd/twl6030-irq.c > > +++ b/drivers/mfd/twl6030-irq.c > > @@ -36,6 +36,7 @@ > > #include <linux/irq.h> > > #include <linux/kthread.h> > > #include <linux/i2c/twl.h> > > +#include <linux/platform_device.h> > > > > /* > > * TWL6030 (unlike its predecessors, which had two level interrupt > handling) > > @@ -223,6 +224,81 @@ int twl6030_interrupt_mask(u8 bit_mask, u8 offset) > > } > > EXPORT_SYMBOL(twl6030_interrupt_mask); > > > > +int twl6030_mmc_card_detect_config(void) > > +{ > > + int ret; > > + u8 reg_val = 0; > > + > > + /* Unmasking the Card detect Interrupt line for MMC1 from > Phoenix */ > > + if (twl_class_is_6030()) { > > + twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK, > > + > REG_INT_MSK_LINE_B); > > + twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK, > > + > REG_INT_MSK_STS_B); > > + } > > + > > + /* > > + * Intially Configuring MMC_CTRL for receving interrupts & > > + * Card status on TWL6030 for MMC1 > > + */ > > + ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val, > TWL6030_MMCCTRL); > > + if (ret < 0) { > > + pr_err("twl6030: Failed to read MMCCTRL, error %d\n", > ret); > > + return ret; > > + } > > + reg_val &= ~VMMC_AUTO_OFF; > > + reg_val |= SW_FC; > > + ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, > TWL6030_MMCCTRL); > > + if (ret < 0) { > > + return ret; > > + pr_err("twl6030: Failed to write MMCCTRL, error %d\n", > ret); > > + } > > + > > + /* Configuring PullUp-PullDown register */ > > + ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val, > > + > TWL6030_CFG_INPUT_PUPD3); > > + if (ret < 0) { > > + return ret; > > + pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error > %d\n", > > + > ret); > > + } > > + reg_val &= ~(MMC_PU | MMC_PD); > > + ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, > > + > TWL6030_CFG_INPUT_PUPD3); > > + if (ret < 0) { > > + pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error > %d\n", > > + > ret); > > + return ret; > > + } > > + return 0; > > +} > > +EXPORT_SYMBOL(twl6030_mmc_card_detect_config); > > + > > +int twl6030_mmc_card_detect(struct device *dev, int slot) > > +{ > > + int ret = -EIO; > > + u8 read_reg; > > + struct platform_device *pdev = container_of(dev, > > + struct platform_device, dev); > > + > > + switch (pdev->id) { > > + case 0: > > + /* > > + * BIT0 of REG_MMC_CTRL > > + * 0 - Card not present ,1 - Card present > > + */ > > + ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &read_reg, > > + > TWL6030_MMCCTRL); > > + if (ret >= 0) > > + ret = read_reg & STS_MMC; > > + break; > > + default: > > + pr_err("Unkown MMC controller %d in %s\n", pdev->id, > __func__); > > + } > > + return ret; > > +} > > +EXPORT_SYMBOL(twl6030_mmc_card_detect); > > + > > int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) > > { > > > > diff --git a/drivers/mmc/host/omap_hsmmc.c > b/drivers/mmc/host/omap_hsmmc.c > > index b032828..c047b13 100644 > > --- a/drivers/mmc/host/omap_hsmmc.c > > +++ b/drivers/mmc/host/omap_hsmmc.c > > @@ -464,8 +464,6 @@ static int omap_hsmmc_gpio_init(struct > omap_mmc_platform_data *pdata) > > int ret; > > > > if (gpio_is_valid(pdata->slots[0].switch_pin)) { > > - pdata->suspend = omap_hsmmc_suspend_cdirq; > > - pdata->resume = omap_hsmmc_resume_cdirq; > > if (pdata->slots[0].cover) > > pdata->slots[0].get_cover_state = > > omap_hsmmc_get_cover_state; > > @@ -2170,6 +2168,8 @@ static int __init omap_hsmmc_probe(struct > platform_device *pdev) > > "Unable to grab MMC CD IRQ\n"); > > goto err_irq_cd; > > } > > + pdata->suspend = omap_hsmmc_suspend_cdirq; > > + pdata->resume = omap_hsmmc_resume_cdirq; > > } > > > > omap_hsmmc_disable_irq(host); > > diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h > > index 6de90bf..9493292 100644 > > --- a/include/linux/i2c/twl.h > > +++ b/include/linux/i2c/twl.h > > @@ -141,6 +141,16 @@ > > #define TWL6030_CHARGER_CTRL_INT_MASK 0x10 > > #define TWL6030_CHARGER_FAULT_INT_MASK 0x60 > > > > +#define TWL6030_MMCCTRL 0xEE > > +#define VMMC_AUTO_OFF (0x1 << 3) > > +#define SW_FC (0x1 << 2) > > +#define STS_MMC 0x1 > > + > > +#define TWL6030_CFG_INPUT_PUPD3 0xF2 > > +#define MMC_PU (0x1 << 3) > > +#define MMC_PD (0x1 << 2) > > + > > + > > > > #define TWL4030_CLASS_ID 0x4030 > > #define TWL6030_CLASS_ID 0x6030 > > @@ -173,6 +183,12 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, > unsigned num_bytes); > > int twl6030_interrupt_unmask(u8 bit_mask, u8 offset); > > int twl6030_interrupt_mask(u8 bit_mask, u8 offset); > > > > +/* Card detect Configuration for MMC1 Controller on OMAP4 */ > > +int twl6030_mmc_card_detect_config(void); > > + > > +/* MMC1 Controller on OMAP4 uses Phoenix irq for Card detect */ > > +int twl6030_mmc_card_detect(struct device *dev, int slot); > > + > > /*--------------------------------------------------------------------- > -*/ > > > > /* > > -- > > 1.6.3.3 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html