John Rigby wrote:
In enable_sdio_irq
if enable
set ctpl
else
clear ctpl
It would really help avoiding mails like this if you just would send
your changes. We know that they are for an old kernel and just a dirty
hack.
Dirk
On Tue, Oct 20, 2009 at 4:47 PM, Madhusudhan <madhu.cr@xxxxxx> wrote:
-----Original Message-----
From: linux-mmc-owner@xxxxxxxxxxxxxxx [mailto:linux-mmc-
owner@xxxxxxxxxxxxxxx] On Behalf Of Dirk Behme
Sent: Monday, October 19, 2009 1:17 PM
To: linux-omap@xxxxxxxxxxxxxxx
Cc: Madhusudhan; 'John Rigby'; 'Woodruff, Richard'; linux-
mmc@xxxxxxxxxxxxxxx; 'Steve Sakoman'
Subject: Re: MMC_CAP_SDIO_IRQ for omap 3430
Madhusudhan wrote:
Hi John,
So does the SDIO card interrupt mode work fine now?
(wrong attachment in previous mail :( sorry)
If somebody likes to test, my updated patch v2 in attachment. Compile
tested only, testing and comments are welcome.
Can you inline the v2 patch please? It helps review. I wonder in the version
that John tested was the CTPL bit set in "set_ios" or "enable_sdio_irq"?
Regards,
Madhu
Cheers
Dirk
_____
From: John Rigby [mailto:jcrigby@xxxxxxxxx]
Sent: Sunday, October 18, 2009 7:24 PM
To: Woodruff, Richard
Cc: Dirk Behme; Chikkature Rajashekar, Madhusudhan;
linux-mmc@xxxxxxxxxxxxxxx; linux-omap@xxxxxxxxxxxxxxx; Steve Sakoman
Subject: Re: MMC_CAP_SDIO_IRQ for omap 3430
Ok I was going to ask where you found that but I just rechecked the TRM
and
there it is in plain site:
When this bit is set to 1, the host controller automatically disables
all
the input buffers except the buffer of mmci_dat[1] outside of a
transaction
in order to detect asynchronous card interrupt on mmci_dat[1] line and
minimize the leakage current of the buffers.
In my defence, I did search the TRM for every occurance of dat1 but not
dat[1]. Oh well live and learn and forget and repeat.
John
On Sun, Oct 18, 2009 at 6:17 PM, John Rigby <jcrigby@xxxxxxxxx> wrote:
Richard,
MMCHS_CON.CPTL = 1 < Don't disable input buffer on DAT1 after
completion to allow seeing SDIO interrupt>
Sounds exactly like what we need.
Thanks
John
On Sun, Oct 18, 2009 at 5:12 PM, Woodruff, Richard <r-woodruff2@xxxxxx>
wrote:
From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap-
owner@xxxxxxxxxxxxxxx] On Behalf Of Dirk Behme
Sent: Sunday, October 18, 2009 11:45 AM
It would be funny if the TRM was wrong and the CIRQ bit is really
cleared by writing 1 to it. I'll try that.
A while back I hunted down a few of the bits for this. Maybe this
will
help some.
SYSCONFIG.ENAWAKEUP = 1 < allow ocp wrapper to generate an interrupt
to
prcm>
MMCHS_HCTL.IWE = 1 < route wake up to module ocp wrapper>
MMCHS_CON.CPTL = 1 < Don't disable input buffer on DAT1 after
completion
to allow seeing SDIO interrupt>
MMCHS_HCTL.IWE
MMCHS_ISE.CIRQ_ENABLE <bit to write to enable interrupt at pin>
MMCHS_STAT<bit to write for clear of SDIO interrupt>
CCCCR - IRQ_ENABLE (think host stack will do this)
Regards,
Richard W.
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
