RE: MMC_CAP_SDIO_IRQ for omap 3430

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap-
> owner@xxxxxxxxxxxxxxx] On Behalf Of Dirk Behme
> Sent: Sunday, October 18, 2009 11:45 AM

> > It would be funny if the TRM was wrong and the CIRQ bit is really
> > cleared by writing 1 to it.  I'll try that.

A while back I hunted down a few of the bits for this.  Maybe this will help some.

SYSCONFIG.ENAWAKEUP = 1 < allow ocp wrapper to generate an interrupt to prcm>
MMCHS_HCTL.IWE = 1 < route wake up to module ocp wrapper>
MMCHS_CON.CPTL = 1  < Don't disable input buffer on DAT1 after completion to allow seeing SDIO interrupt>
MMCHS_HCTL.IWE
MMCHS_ISE.CIRQ_ENABLE <bit to write to enable interrupt at pin>
MMCHS_STAT<bit to write for clear of SDIO interrupt>
CCCCR - IRQ_ENABLE (think host stack will do this)

Regards,
Richard W.
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux