The patch titled
AT91: atmel-mci: Platform configuration to the the atmel-mci driver
has been added to the -mm tree. Its filename is
at91-atmel-mci-platform-configuration-to-the-the-atmel-mci-driver.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: AT91: atmel-mci: Platform configuration to the the atmel-mci driver
From: Rob Emanuele <rob@xxxxxxxxxxx>
Created a modified version of the at91sam9g20 evaluation kit platform
(board-sam9g20ek-2slot-mmc.c) and device support to make use of the
updated atmel-mci driver.
As the use of two slots modify GPIO pin allocation, we create another
board file.
This requires getting the most updated arch/arm/tools/mach-types from
http://www.arm.linux.org.uk/developer/machines/download.php to have the machine
type for the at91sam9g20ek-2slot-mmc board.
[nicolas.ferre@xxxxxxxxx: printk, slot_count modification in at91sam9260_devices.c file]
Signed-off-by: Rob Emanuele <rob@xxxxxxxxxxx>
Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
Cc: Haavard Skinnemoen <hskinnemoen@xxxxxxxxx>
Cc: Andrew Victor <linux@xxxxxxxxxxxx>
Cc: Russell King <rmk@xxxxxxxxxxxxxxxx>
Cc: <linux-mmc@xxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
arch/arm/mach-at91/Kconfig | 7
arch/arm/mach-at91/Makefile | 1
arch/arm/mach-at91/at91sam9260_devices.c | 96 +++++
arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c | 277 +++++++++++++++
arch/arm/mach-at91/include/mach/board.h | 5
5 files changed, 386 insertions(+)
diff -puN arch/arm/mach-at91/Kconfig~at91-atmel-mci-platform-configuration-to-the-the-atmel-mci-driver arch/arm/mach-at91/Kconfig
--- a/arch/arm/mach-at91/Kconfig~at91-atmel-mci-platform-configuration-to-the-the-atmel-mci-driver
+++ a/arch/arm/mach-at91/Kconfig
@@ -289,6 +289,13 @@ config MACH_NEOCORE926
help
Select this if you are using the Adeneo Neocore 926 board.
+config MACH_AT91SAM9G20EK_2MMC
+ bool "Atmel AT91SAM9G20-EK Evaluation Kit modified for 2 MMC Slots"
+ depends on ARCH_AT91SAM9G20
+ help
+ Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
+ Rev A or B modified for 2 MMC Slots.
+
endif
# ----------------------------------------------------------
diff -puN arch/arm/mach-at91/Makefile~at91-atmel-mci-platform-configuration-to-the-the-atmel-mci-driver arch/arm/mach-at91/Makefile
--- a/arch/arm/mach-at91/Makefile~at91-atmel-mci-platform-configuration-to-the-the-atmel-mci-driver
+++ a/arch/arm/mach-at91/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK) += board
# AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
+obj-$(CONFIG_MACH_AT91SAM9G20EK_2MMC) += board-sam9g20ek-2slot-mmc.o
obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
# AT91SAM9G45 board-specific support
diff -puN arch/arm/mach-at91/at91sam9260_devices.c~at91-atmel-mci-platform-configuration-to-the-the-atmel-mci-driver arch/arm/mach-at91/at91sam9260_devices.c
--- a/arch/arm/mach-at91/at91sam9260_devices.c~at91-atmel-mci-platform-configuration-to-the-the-atmel-mci-driver
+++ a/arch/arm/mach-at91/at91sam9260_devices.c
@@ -278,6 +278,102 @@ void __init at91_add_device_mmc(short mm
void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
#endif
+/* --------------------------------------------------------------------
+ * MMC / SD Slot for Atmel MCI Driver
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
+static struct mci_platform_data mmc_data;
+
+static struct resource mmc_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_MCI,
+ .end = AT91SAM9260_BASE_MCI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_MCI,
+ .end = AT91SAM9260_ID_MCI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9260_mmc_device = {
+ .name = "atmel_mci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &mmc_data,
+ },
+ .resource = mmc_resources,
+ .num_resources = ARRAY_SIZE(mmc_resources),
+};
+
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
+{
+ unsigned int i;
+ unsigned int slot_count = 0;
+
+ if (!data)
+ return;
+
+ for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
+ if (data->slot[i].bus_width) {
+ /* input/irq */
+ if (data->slot[i].detect_pin) {
+ at91_set_gpio_input(data->slot[i].detect_pin, 1);
+ at91_set_deglitch(data->slot[i].detect_pin, 1);
+ }
+ if (data->slot[i].wp_pin)
+ at91_set_gpio_input(data->slot[i].wp_pin, 1);
+
+ switch(i) {
+ case 0:
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA7, 1);
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA6, 1);
+ if (data->slot[i].bus_width == 4) {
+ at91_set_A_periph(AT91_PIN_PA9, 1);
+ at91_set_A_periph(AT91_PIN_PA10, 1);
+ at91_set_A_periph(AT91_PIN_PA11, 1);
+ }
+ slot_count++;
+ break;
+ case 1:
+ /* CMD */
+ at91_set_B_periph(AT91_PIN_PA1, 1);
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_B_periph(AT91_PIN_PA0, 1);
+ if (data->slot[i].bus_width == 4) {
+ at91_set_B_periph(AT91_PIN_PA5, 1);
+ at91_set_B_periph(AT91_PIN_PA4, 1);
+ at91_set_B_periph(AT91_PIN_PA3, 1);
+ }
+ slot_count++;
+ break;
+ default:
+ printk(KERN_ERR
+ "AT91: SD/MMC slot %d not available\n", i);
+ break;
+ }
+ }
+ }
+
+ if (slot_count) {
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA8, 0);
+
+ mmc_data = *data;
+ platform_device_register(&at91sam9260_mmc_device);
+ }
+}
+#else
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
+#endif
+
/* --------------------------------------------------------------------
* NAND / SmartMedia
diff -puN /dev/null arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
--- /dev/null
+++ a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
@@ -0,0 +1,277 @@
+/*
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ * Copyright (C) 2009 Rob Emanuele
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/at73c213.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91sam9260_initialize(18432000);
+
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+ at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+ .ports = 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+ .vbus_pin = AT91_PIN_PC5,
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if !defined(CONFIG_MMC_ATMELMCI)
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 1,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+ { /* DataFlash card */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#endif
+#endif
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+ .phy_irq_pin = AT91_PIN_PC12,
+ .is_rmii = 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+ .name = "Bootstrap",
+ .offset = 0,
+ .size = 4 * SZ_1M,
+ },
+ {
+ .name = "Partition 1",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 60 * SZ_1M,
+ },
+ {
+ .name = "Partition 2",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
+ return ek_nand_partition;
+}
+
+/* det_pin is not connected */
+static struct atmel_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+ .rdy_pin = AT91_PIN_PC13,
+ .enable_pin = AT91_PIN_PC14,
+ .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
+ .bus_width_16 = 1,
+#else
+ .bus_width_16 = 0,
+#endif
+};
+
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 2,
+ .ncs_write_setup = 0,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 4,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 4,
+ .nwe_pulse = 4,
+
+ .read_cycle = 7,
+ .write_cycle = 7,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+ .tdf_cycles = 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ /* setup bus-width (8 or 16) */
+ if (ek_nand_data.bus_width_16)
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+ else
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &ek_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
+
+/*
+ * MCI (SD/MMC)
+ * det_pin and wp_pin are not connected
+ */
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+static struct mci_platform_data __initdata ek_mmc_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -ENODEV,
+ .wp_pin = -ENODEV,
+ },
+ .slot[1] = {
+ .bus_width = 4,
+ .detect_pin = -ENODEV,
+ .wp_pin = -ENODEV,
+ },
+
+};
+#else
+static struct amci_platform_data __initdata ek_mmc_data = {
+};
+#endif
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+ { /* "bottom" led, green, userled1 to be defined */
+ .name = "ds5",
+ .gpio = AT91_PIN_PB12,
+ .active_low = 1,
+ .default_trigger = "none",
+ },
+ { /* "power" led, yellow */
+ .name = "ds1",
+ .gpio = AT91_PIN_PB13,
+ .default_trigger = "heartbeat",
+ }
+};
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("24c512", 0x50),
+ },
+};
+
+
+static void __init ek_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ at91_add_device_usbh(&ek_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&ek_udc_data);
+ /* SPI */
+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+ /* NAND */
+ ek_add_device_nand();
+ /* Ethernet */
+ at91_add_device_eth(&ek_macb_data);
+ /* MMC */
+ at91_add_device_mci(0, &ek_mmc_data);
+ /* I2C */
+ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ /* PCK0 provides MCLK to the WM8731 */
+ at91_set_B_periph(AT91_PIN_PC1, 0);
+ /* SSC (for WM8731) */
+ at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
+}
+
+MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
+ /* Maintainer: Rob Emanuele */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = ek_map_io,
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
diff -puN arch/arm/mach-at91/include/mach/board.h~at91-atmel-mci-platform-configuration-to-the-the-atmel-mci-driver arch/arm/mach-at91/include/mach/board.h
--- a/arch/arm/mach-at91/include/mach/board.h~at91-atmel-mci-platform-configuration-to-the-the-atmel-mci-driver
+++ a/arch/arm/mach-at91/include/mach/board.h
@@ -37,6 +37,7 @@
#include <linux/leds.h>
#include <linux/spi/spi.h>
#include <linux/usb/atmel_usba_udc.h>
+#include <linux/atmel-mci.h>
/* USB Device */
struct at91_udc_data {
@@ -63,6 +64,7 @@ struct at91_cf_data {
extern void __init at91_add_device_cf(struct at91_cf_data *data);
/* MMC / SD */
+ /* at91_mci platform config */
struct at91_mmc_data {
u8 det_pin; /* card detect IRQ */
unsigned slot_b:1; /* uses Slot B */
@@ -72,6 +74,9 @@ struct at91_mmc_data {
};
extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
+ /* atmel-mci platform config */
+extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data);
+
/* Ethernet (EMAC & MACB) */
struct at91_eth_data {
u32 phy_mask;
_
Patches currently in -mm which might be from rob@xxxxxxxxxxx are
atmel-mci-unified-atmel-mci-drivers-avr32-at91.patch
at91-atmel-mci-platform-configuration-to-the-the-atmel-mci-driver.patch
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
