The patch titled
atmel-mci: unified Atmel MCI drivers (AVR32 & AT91)
has been added to the -mm tree. Its filename is
atmel-mci-unified-atmel-mci-drivers-avr32-at91.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: atmel-mci: unified Atmel MCI drivers (AVR32 & AT91)
From: Rob Emanuele <rob@xxxxxxxxxxx>
Unification of the atmel-mci driver to support the AT91 processors MCI
interface. The atmel-mci driver currently supports the AVR32 and this
patch adds AT91 support.
Add read/write proof selection switch dependent on chip availability of
this feature.
To use this new driver on a at91 the platform driver for your board needs
to be updated.
[nicolas.ferre@xxxxxxxxx indent, Kconfig comment and one printk modification]
Signed-off-by: Rob Emanuele <rob@xxxxxxxxxxx>
Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
Cc: Haavard Skinnemoen <hskinnemoen@xxxxxxxxx>
Cc: Andrew Victor <linux@xxxxxxxxxxxx>
Cc: Russell King <rmk@xxxxxxxxxxxxxxxx>
Cc: <linux-mmc@xxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/Kconfig | 16 ++++++++++++----
drivers/mmc/host/atmel-mci.c | 33 ++++++++++++++++++++++++++++++---
2 files changed, 42 insertions(+), 7 deletions(-)
diff -puN drivers/mmc/host/Kconfig~atmel-mci-unified-atmel-mci-drivers-avr32-at91 drivers/mmc/host/Kconfig
--- a/drivers/mmc/host/Kconfig~atmel-mci-unified-atmel-mci-drivers-avr32-at91
+++ a/drivers/mmc/host/Kconfig
@@ -160,6 +160,12 @@ config MMC_AU1X
If unsure, say N.
+choice
+ prompt "Atmel SD/MMC Driver"
+ default MMC_ATMELMCI if AVR32
+ help
+ Choose which driver to use for the Atmel MCI Silicon
+
config MMC_AT91
tristate "AT91 SD/MMC Card Interface support"
depends on ARCH_AT91
@@ -170,17 +176,19 @@ config MMC_AT91
config MMC_ATMELMCI
tristate "Atmel Multimedia Card Interface support"
- depends on AVR32
+ depends on AVR32 || ARCH_AT91
help
This selects the Atmel Multimedia Card Interface driver. If
- you have an AT32 (AVR32) platform with a Multimedia Card
- slot, say Y or M here.
+ you have an AT32 (AVR32) or AT91 platform with a Multimedia
+ Card slot, say Y or M here.
If unsure, say N.
+endchoice
+
config MMC_ATMELMCI_DMA
bool "Atmel MCI DMA support (EXPERIMENTAL)"
- depends on MMC_ATMELMCI && DMA_ENGINE && EXPERIMENTAL
+ depends on MMC_ATMELMCI && AVR32 && DMA_ENGINE && EXPERIMENTAL
help
Say Y here to have the Atmel MCI driver use a DMA engine to
do data transfers and thus increase the throughput and
diff -puN drivers/mmc/host/atmel-mci.c~atmel-mci-unified-atmel-mci-drivers-avr32-at91 drivers/mmc/host/atmel-mci.c
--- a/drivers/mmc/host/atmel-mci.c~atmel-mci-unified-atmel-mci-drivers-avr32-at91
+++ a/drivers/mmc/host/atmel-mci.c
@@ -30,6 +30,7 @@
#include <asm/io.h>
#include <asm/unaligned.h>
+#include <mach/cpu.h>
#include <mach/board.h>
#include "atmel-mci-regs.h"
@@ -210,6 +211,18 @@ struct atmel_mci_slot {
set_bit(event, &host->pending_events)
/*
+ * Enable or disable features/registers based on
+ * whether the processor supports them
+ */
+static bool mci_has_rwproof(void)
+{
+ if (cpu_is_at91sam9261() || cpu_is_at91rm9200())
+ return false;
+ else
+ return true;
+}
+
+/*
* The debugfs stuff below is mostly optimized away when
* CONFIG_DEBUG_FS is not set.
*/
@@ -276,8 +289,13 @@ static void atmci_show_status_reg(struct
[3] = "BLKE",
[4] = "DTIP",
[5] = "NOTBUSY",
+ [6] = "ENDRX",
+ [7] = "ENDTX",
[8] = "SDIOIRQA",
[9] = "SDIOIRQB",
+ [12] = "SDIOWAIT",
+ [14] = "RXBUFF",
+ [15] = "TXBUFE",
[16] = "RINDE",
[17] = "RDIRE",
[18] = "RCRCE",
@@ -285,6 +303,11 @@ static void atmci_show_status_reg(struct
[20] = "RTOE",
[21] = "DCRCE",
[22] = "DTOE",
+ [23] = "CSTOE",
+ [24] = "BLKOVRE",
+ [25] = "DMADONE",
+ [26] = "FIFOEMPTY",
+ [27] = "XFRDONE",
[30] = "OVRE",
[31] = "UNRE",
};
@@ -849,13 +872,15 @@ static void atmci_set_ios(struct mmc_hos
clkdiv = 255;
}
+ host->mode_reg = MCI_MR_CLKDIV(clkdiv);
+
/*
* WRPROOF and RDPROOF prevent overruns/underruns by
* stopping the clock when the FIFO is full/empty.
* This state is not expected to last for long.
*/
- host->mode_reg = MCI_MR_CLKDIV(clkdiv) | MCI_MR_WRPROOF
- | MCI_MR_RDPROOF;
+ if (mci_has_rwproof())
+ host->mode_reg |= (MCI_MR_WRPROOF | MCI_MR_RDPROOF);
if (list_empty(&host->queue))
mci_writel(host, MR, host->mode_reg);
@@ -1649,8 +1674,10 @@ static int __init atmci_probe(struct pla
nr_slots++;
}
- if (!nr_slots)
+ if (!nr_slots) {
+ dev_err(&pdev->dev, "init failed: no slot defined\n");
goto err_init_slot;
+ }
dev_info(&pdev->dev,
"Atmel MCI controller at 0x%08lx irq %d, %u slots\n",
_
Patches currently in -mm which might be from rob@xxxxxxxxxxx are
atmel-mci-unified-atmel-mci-drivers-avr32-at91.patch
at91-atmel-mci-platform-configuration-to-the-the-atmel-mci-driver.patch
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
