Re: CMA broken in next-20120926

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 28, 2012 at 01:39:24PM +0200, Thierry Reding wrote:
> On Fri, Sep 28, 2012 at 12:07:12PM +0100, Mel Gorman wrote:
> > On Fri, Sep 28, 2012 at 12:51:13PM +0200, Thierry Reding wrote:
> > > On Fri, Sep 28, 2012 at 12:38:15PM +0200, Thierry Reding wrote:
> > > > On Fri, Sep 28, 2012 at 12:32:07PM +0200, Thierry Reding wrote:
> > > > > On Fri, Sep 28, 2012 at 11:27:28AM +0100, Mel Gorman wrote:
> > > > > > On Fri, Sep 28, 2012 at 11:48:25AM +0300, Peter Ujfalusi wrote:
> > > > > > > Hi,
> > > > > > > 
> > > > > > > On 09/28/2012 11:37 AM, Mel Gorman wrote:
> > > > > > > >> I hope this patch fixes the bug. If this patch fixes the problem
> > > > > > > >> but has some problem about description or someone has better idea,
> > > > > > > >> feel free to modify and resend to akpm, Please.
> > > > > > > >>
> > > > > > > > 
> > > > > > > > A full revert is overkill. Can the following patch be tested as a
> > > > > > > > potential replacement please?
> > > > > > > > 
> > > > > > > > ---8<---
> > > > > > > > mm: compaction: Iron out isolate_freepages_block() and isolate_freepages_range() -fix1
> > > > > > > > 
> > > > > > > > CMA is reported to be broken in next-20120926. Minchan Kim pointed out
> > > > > > > > that this was due to nr_scanned != total_isolated in the case of CMA
> > > > > > > > because PageBuddy pages are one scan but many isolations in CMA. This
> > > > > > > > patch should address the problem.
> > > > > > > > 
> > > > > > > > This patch is a fix for
> > > > > > > > mm-compaction-acquire-the-zone-lock-as-late-as-possible-fix-2.patch
> > > > > > > > 
> > > > > > > > Signed-off-by: Mel Gorman <mgorman@xxxxxxx>
> > > > > > > 
> > > > > > > linux-next + this patch alone also works for me.
> > > > > > > 
> > > > > > > Tested-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
> > > > > > 
> > > > > > Thanks Peter. I expect it also works for Thierry as I expect you were
> > > > > > suffering the same problem but obviously confirmation of that would be nice.
> > > > > 
> > > > > I've been running a few tests and indeed this solves the obvious problem
> > > > > that the coherent pool cannot be created at boot (which in turn caused
> > > > > the ethernet adapter to fail on Tegra).
> > > > > 
> > > > > However I've been working on the Tegra DRM driver, which uses CMA to
> > > > > allocate large chunks of framebuffer memory and these are now failing.
> > > > > I'll need to check if Minchan's patch solves that problem as well.
> > > > 
> > > > Indeed, with Minchan's patch the DRM can allocate the framebuffer
> > > > without a problem. Something else must be wrong then.
> > > 
> > > However, depending on the size of the allocation it also happens with
> > > Minchan's patch. What I see is this:
> > > 
> > > [   60.736729] alloc_contig_range test_pages_isolated(1e900, 1f0e9) failed
> > > [   60.743572] alloc_contig_range test_pages_isolated(1ea00, 1f1e9) failed
> > > [   60.750424] alloc_contig_range test_pages_isolated(1ea00, 1f2e9) failed
> > > [   60.757239] alloc_contig_range test_pages_isolated(1ec00, 1f3e9) failed
> > > [   60.764066] alloc_contig_range test_pages_isolated(1ec00, 1f4e9) failed
> > > [   60.770893] alloc_contig_range test_pages_isolated(1ec00, 1f5e9) failed
> > > [   60.777698] alloc_contig_range test_pages_isolated(1ec00, 1f6e9) failed
> > > [   60.784526] alloc_contig_range test_pages_isolated(1f000, 1f7e9) failed
> > > [   60.791148] drm tegra: Failed to alloc buffer: 8294400
> > > 
> > > I'm pretty sure this did work before next-20120926.
> > > 
> > 
> > Can you double check this please?
> > 
> > This is a separate bug but may be related to the same series. However, CMA should
> > be ignoring the "skip" hints and because it's sync compaction it should
> > not be exiting due to lock contention. Maybe Marek will spot it.
> 
> I've written a small test module that tries to allocate growing blocks
> of contiguous memory and it seems like with your patch this always fails
> at 8 MiB.

You earlier said it also happens with Minchan's but your statment here
is less clear. Does Minchan's also fail on the 8MiB boundary? Second,
did the test module work with next-20120926?

> Given the default size for CMA allocations is 16 MiB I thought
> I should try increasing that but it doesn't make a difference. The
> allocation still fails at 8 MiB.
> Maybe that'll give another clue.
> 

It narrows down the possibilities at least.

> > Failing that, would you be in a position to bisect between v3.6-rc6 and
> > current next to try pin-point exactly which patch introduced this
> > problem please?
> 
> I can possibly do that but probably not before sometime later next week
> unfortunately. But I'll see if I can find some time to double-check that
> some older linux-next version works and that my memory isn't failing me.
> 

That would be very much appreciated because it narrows down the
possibilties. I don't have anything in place that allows me to test CMA
so the more information I can get the better.

Thanks.

-- 
Mel Gorman
SUSE Labs

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]