Re: [PATCH 3/3] mm/page_alloc: Introduce a new sysctl knob vm.pcp_batch_scale_max

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 12, 2024 at 4:26 PM Huang, Ying <ying.huang@xxxxxxxxx> wrote:
>
> Yafang Shao <laoar.shao@xxxxxxxxx> writes:
>
> > On Fri, Jul 12, 2024 at 3:06 PM Huang, Ying <ying.huang@xxxxxxxxx> wrote:
> >>
> >> Yafang Shao <laoar.shao@xxxxxxxxx> writes:
> >>
> >> > On Fri, Jul 12, 2024 at 2:18 PM Huang, Ying <ying.huang@xxxxxxxxx> wrote:
> >> >>
> >> >> Yafang Shao <laoar.shao@xxxxxxxxx> writes:
> >> >>
> >> >> > On Fri, Jul 12, 2024 at 1:26 PM Huang, Ying <ying.huang@xxxxxxxxx> wrote:
> >> >> >>
> >> >> >> Yafang Shao <laoar.shao@xxxxxxxxx> writes:
> >> >> >>
> >> >> >> > On Fri, Jul 12, 2024 at 11:07 AM Huang, Ying <ying.huang@xxxxxxxxx> wrote:
> >> >> >> >>
> >> >> >> >> Yafang Shao <laoar.shao@xxxxxxxxx> writes:
> >> >> >> >>
> >> >> >> >> > On Fri, Jul 12, 2024 at 9:21 AM Huang, Ying <ying.huang@xxxxxxxxx> wrote:
> >> >> >> >> >>
> >> >> >> >> >> Yafang Shao <laoar.shao@xxxxxxxxx> writes:
> >> >> >> >> >>
> >> >> >> >> >> > On Thu, Jul 11, 2024 at 6:51 PM Huang, Ying <ying.huang@xxxxxxxxx> wrote:
> >> >> >> >> >> >>
> >> >> >> >> >> >> Yafang Shao <laoar.shao@xxxxxxxxx> writes:
> >> >> >> >> >> >>
> >> >> >> >> >> >> > On Thu, Jul 11, 2024 at 4:20 PM Huang, Ying <ying.huang@xxxxxxxxx> wrote:
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> Yafang Shao <laoar.shao@xxxxxxxxx> writes:
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> > On Thu, Jul 11, 2024 at 2:44 PM Huang, Ying <ying.huang@xxxxxxxxx> wrote:
> >> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> >> Yafang Shao <laoar.shao@xxxxxxxxx> writes:
> >> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> >> > On Wed, Jul 10, 2024 at 10:51 AM Huang, Ying <ying.huang@xxxxxxxxx> wrote:
> >> >> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> >> >> Yafang Shao <laoar.shao@xxxxxxxxx> writes:
> >> >> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> >> >> > The configuration parameter PCP_BATCH_SCALE_MAX poses challenges for
> >> >> >> >> >> >> >> >> >> > quickly experimenting with specific workloads in a production environment,
> >> >> >> >> >> >> >> >> >> > particularly when monitoring latency spikes caused by contention on the
> >> >> >> >> >> >> >> >> >> > zone->lock. To address this, a new sysctl parameter vm.pcp_batch_scale_max
> >> >> >> >> >> >> >> >> >> > is introduced as a more practical alternative.
> >> >> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> >> >> In general, I'm neutral to the change.  I can understand that kernel
> >> >> >> >> >> >> >> >> >> configuration isn't as flexible as sysctl knob.  But, sysctl knob is ABI
> >> >> >> >> >> >> >> >> >> too.
> >> >> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> >> >> > To ultimately mitigate the zone->lock contention issue, several suggestions
> >> >> >> >> >> >> >> >> >> > have been proposed. One approach involves dividing large zones into multi
> >> >> >> >> >> >> >> >> >> > smaller zones, as suggested by Matthew[0], while another entails splitting
> >> >> >> >> >> >> >> >> >> > the zone->lock using a mechanism similar to memory arenas and shifting away
> >> >> >> >> >> >> >> >> >> > from relying solely on zone_id to identify the range of free lists a
> >> >> >> >> >> >> >> >> >> > particular page belongs to[1]. However, implementing these solutions is
> >> >> >> >> >> >> >> >> >> > likely to necessitate a more extended development effort.
> >> >> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> >> >> Per my understanding, the change will hurt instead of improve zone->lock
> >> >> >> >> >> >> >> >> >> contention.  Instead, it will reduce page allocation/freeing latency.
> >> >> >> >> >> >> >> >> >
> >> >> >> >> >> >> >> >> > I'm quite perplexed by your recent comment. You introduced a
> >> >> >> >> >> >> >> >> > configuration that has proven to be difficult to use, and you have
> >> >> >> >> >> >> >> >> > been resistant to suggestions for modifying it to a more user-friendly
> >> >> >> >> >> >> >> >> > and practical tuning approach. May I inquire about the rationale
> >> >> >> >> >> >> >> >> > behind introducing this configuration in the beginning?
> >> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> >> Sorry, I don't understand your words.  Do you need me to explain what is
> >> >> >> >> >> >> >> >> "neutral"?
> >> >> >> >> >> >> >> >
> >> >> >> >> >> >> >> > No, thanks.
> >> >> >> >> >> >> >> > After consulting with ChatGPT, I received a clear and comprehensive
> >> >> >> >> >> >> >> > explanation of what "neutral" means, providing me with a better
> >> >> >> >> >> >> >> > understanding of the concept.
> >> >> >> >> >> >> >> >
> >> >> >> >> >> >> >> > So, can you explain why you introduced it as a config in the beginning ?
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> I think that I have explained it in the commit log of commit
> >> >> >> >> >> >> >> 52166607ecc9 ("mm: restrict the pcp batch scale factor to avoid too long
> >> >> >> >> >> >> >> latency").  Which introduces the config.
> >> >> >> >> >> >> >
> >> >> >> >> >> >> > What specifically are your expectations for how users should utilize
> >> >> >> >> >> >> > this config in real production workload?
> >> >> >> >> >> >> >
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> Sysctl knob is ABI, which needs to be maintained forever.  Can you
> >> >> >> >> >> >> >> explain why you need it?  Why cannot you use a fixed value after initial
> >> >> >> >> >> >> >> experiments.
> >> >> >> >> >> >> >
> >> >> >> >> >> >> > Given the extensive scale of our production environment, with hundreds
> >> >> >> >> >> >> > of thousands of servers, it begs the question: how do you propose we
> >> >> >> >> >> >> > efficiently manage the various workloads that remain unaffected by the
> >> >> >> >> >> >> > sysctl change implemented on just a few thousand servers? Is it
> >> >> >> >> >> >> > feasible to expect us to recompile and release a new kernel for every
> >> >> >> >> >> >> > instance where the default value falls short? Surely, there must be
> >> >> >> >> >> >> > more practical and efficient approaches we can explore together to
> >> >> >> >> >> >> > ensure optimal performance across all workloads.
> >> >> >> >> >> >> >
> >> >> >> >> >> >> > When making improvements or modifications, kindly ensure that they are
> >> >> >> >> >> >> > not solely confined to a test or lab environment. It's vital to also
> >> >> >> >> >> >> > consider the needs and requirements of our actual users, along with
> >> >> >> >> >> >> > the diverse workloads they encounter in their daily operations.
> >> >> >> >> >> >>
> >> >> >> >> >> >> Have you found that your different systems requires different
> >> >> >> >> >> >> CONFIG_PCP_BATCH_SCALE_MAX value already?
> >> >> >> >> >> >
> >> >> >> >> >> > For specific workloads that introduce latency, we set the value to 0.
> >> >> >> >> >> > For other workloads, we keep it unchanged until we determine that the
> >> >> >> >> >> > default value is also suboptimal. What is the issue with this
> >> >> >> >> >> > approach?
> >> >> >> >> >>
> >> >> >> >> >> Firstly, this is a system wide configuration, not workload specific.
> >> >> >> >> >> So, other workloads run on the same system will be impacted too.  Will
> >> >> >> >> >> you run one workload only on one system?
> >> >> >> >> >
> >> >> >> >> > It seems we're living on different planets. You're happily working in
> >> >> >> >> > your lab environment, while I'm struggling with real-world production
> >> >> >> >> > issues.
> >> >> >> >> >
> >> >> >> >> > For servers:
> >> >> >> >> >
> >> >> >> >> > Server 1 to 10,000: vm.pcp_batch_scale_max = 0
> >> >> >> >> > Server 10,001 to 1,000,000: vm.pcp_batch_scale_max = 5
> >> >> >> >> > Server 1,000,001 and beyond: Happy with all values
> >> >> >> >> >
> >> >> >> >> > Is this hard to understand?
> >> >> >> >> >
> >> >> >> >> > In other words:
> >> >> >> >> >
> >> >> >> >> > For applications:
> >> >> >> >> >
> >> >> >> >> > Application 1 to 10,000: vm.pcp_batch_scale_max = 0
> >> >> >> >> > Application 10,001 to 1,000,000: vm.pcp_batch_scale_max = 5
> >> >> >> >> > Application 1,000,001 and beyond: Happy with all values
> >> >> >> >>
> >> >> >> >> Good to know this.  Thanks!
> >> >> >> >>
> >> >> >> >> >>
> >> >> >> >> >> Secondly, we need some evidences to introduce a new system ABI.  For
> >> >> >> >> >> example, we need to use different configuration on different systems
> >> >> >> >> >> otherwise some workloads will be hurt.  Can you provide some evidences
> >> >> >> >> >> to support your change?  IMHO, it's not good enough to say I don't know
> >> >> >> >> >> why I just don't want to change existing systems.  If so, it may be
> >> >> >> >> >> better to wait until you have more evidences.
> >> >> >> >> >
> >> >> >> >> > It seems the community encourages developers to experiment with their
> >> >> >> >> > improvements in lab environments using meticulously designed test
> >> >> >> >> > cases A, B, C, and as many others as they can imagine, ultimately
> >> >> >> >> > obtaining perfect data. However, it discourages developers from
> >> >> >> >> > directly addressing real-world workloads. Sigh.
> >> >> >> >>
> >> >> >> >> You cannot know whether your workloads benefit or hurt for the different
> >> >> >> >> batch number and how in your production environment?  If you cannot, how
> >> >> >> >> do you decide which workload deploys on which system (with different
> >> >> >> >> batch number configuration).  If you can, can you provide such
> >> >> >> >> information to support your patch?
> >> >> >> >
> >> >> >> > We leverage a meticulous selection of network metrics, particularly
> >> >> >> > focusing on TcpExt indicators, to keep a close eye on application
> >> >> >> > latency. This includes metrics such as TcpExt.TCPTimeouts,
> >> >> >> > TcpExt.RetransSegs, TcpExt.DelayedACKLost, TcpExt.TCPSlowStartRetrans,
> >> >> >> > TcpExt.TCPFastRetrans, TcpExt.TCPOFOQueue, and more.
> >> >> >> >
> >> >> >> > In instances where a problematic container terminates, we've noticed a
> >> >> >> > sharp spike in TcpExt.TCPTimeouts, reaching over 40 occurrences per
> >> >> >> > second, which serves as a clear indication that other applications are
> >> >> >> > experiencing latency issues. By fine-tuning the vm.pcp_batch_scale_max
> >> >> >> > parameter to 0, we've been able to drastically reduce the maximum
> >> >> >> > frequency of these timeouts to less than one per second.
> >> >> >>
> >> >> >> Thanks a lot for sharing this.  I learned much from it!
> >> >> >>
> >> >> >> > At present, we're selectively applying this adjustment to clusters
> >> >> >> > that exclusively host the identified problematic applications, and
> >> >> >> > we're closely monitoring their performance to ensure stability. To
> >> >> >> > date, we've observed no network latency issues as a result of this
> >> >> >> > change. However, we remain cautious about extending this optimization
> >> >> >> > to other clusters, as the decision ultimately depends on a variety of
> >> >> >> > factors.
> >> >> >> >
> >> >> >> > It's important to note that we're not eager to implement this change
> >> >> >> > across our entire fleet, as we recognize the potential for unforeseen
> >> >> >> > consequences. Instead, we're taking a cautious approach by initially
> >> >> >> > applying it to a limited number of servers. This allows us to assess
> >> >> >> > its impact and make informed decisions about whether or not to expand
> >> >> >> > its use in the future.
> >> >> >>
> >> >> >> So, you haven't observed any performance hurt yet.  Right?
> >> >> >
> >> >> > Right.
> >> >> >
> >> >> >> If you
> >> >> >> haven't, I suggest you to keep the patch in your downstream kernel for a
> >> >> >> while.  In the future, if you find the performance of some workloads
> >> >> >> hurts because of the new batch number, you can repost the patch with the
> >> >> >> supporting data.  If in the end, the performance of more and more
> >> >> >> workloads is good with the new batch number.  You may consider to make 0
> >> >> >> the default value :-)
> >> >> >
> >> >> > That is not how the real world works.
> >> >> >
> >> >> > In the real world:
> >> >> >
> >> >> > - No one knows what may happen in the future.
> >> >> >   Therefore, if possible, we should make systems flexible, unless
> >> >> > there is a strong justification for using a hard-coded value.
> >> >> >
> >> >> > - Minimize changes whenever possible.
> >> >> >   These systems have been working fine in the past, even if with lower
> >> >> > performance. Why make changes just for the sake of improving
> >> >> > performance? Does the key metric of your performance data truly matter
> >> >> > for their workload?
> >> >>
> >> >> These are good policy in your organization and business.  But, it's not
> >> >> necessary the policy that Linux kernel upstream should take.
> >> >
> >> > You mean the Upstream Linux kernel only designed for the lab ?
> >> >
> >> >>
> >> >> Community needs to consider long-term maintenance overhead, so it adds
> >> >> new ABI (such as sysfs knob) to kernel with the necessary justification.
> >> >> In general, it prefer to use a good default value or an automatic
> >> >> algorithm that works for everyone.  Community tries avoiding (or fixing)
> >> >> regressions as much as possible, but this will not stop kernel from
> >> >> changing, even if it's big.
> >> >
> >> > Please explain to me why the kernel config is not ABI, but the sysctl is ABI.
> >>
> >> Linux kernel will not break ABI until the last users stop using it.
> >
> > However, you haven't given a clear reference why the systl is an ABI.
>
> TBH, I don't find a formal document said it explicitly after some
> searching.
>
> Hi, Andrew, Matthew,
>
> Can you help me on this?  Whether sysctl is considered Linux kernel ABI?
> Or something similar?

In my experience, we consistently utilize an if-statement to configure
sysctl settings in our production environments.

    if [ -f ${sysctl_file} ]; then
        echo ${new_value} > ${sysctl_file}
    fi

Additionally, you can incorporate this into rc.local to ensure the
configuration is applied upon system reboot.

Even if you add it to the sysctl.conf without the if-statement, it
won't break anything.

The pcp-related sysctl parameter, vm.percpu_pagelist_high_fraction,
underwent a naming change along with a functional update from its
predecessor, vm.percpu_pagelist_fraction, in commit 74f44822097c
("mm/page_alloc: introduce vm.percpu_pagelist_high_fraction"). Despite
this significant change, there have been no reported issues or
complaints, suggesting that the renaming and functional update have
not negatively impacted the system's functionality.

-- 
Regards
Yafang





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux