Gregory Price <gregory.price@xxxxxxxxxxxx> writes: > On Fri, Dec 15, 2023 at 01:02:59PM +0800, Huang, Ying wrote: >> <sthanneeru.opensrc@xxxxxxxxxx> writes: >> >> > ============= >> > Version Notes: >> > >> > V2 : Changed interface to memtier_override from adistance_offset. >> > memtier_override was recommended by >> > 1. John Groves <john@xxxxxxxxxxxxxx> >> > 2. Ravi Shankar <ravis.opensrc@xxxxxxxxxx> >> > 3. Brice Goglin <Brice.Goglin@xxxxxxxx> >> >> It appears that you ignored my comments for V1 as follows ... >> >> https://lore.kernel.org/lkml/87o7f62vur.fsf@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/ >> https://lore.kernel.org/lkml/87jzpt2ft5.fsf@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/ >> https://lore.kernel.org/lkml/87a5qp2et0.fsf@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/ >> > > Not speaking for the group, just chiming in because i'd discussed it > with them. > > "Memory Type" is a bit nebulous. Is a Micron Type-3 with performance X > and an SK Hynix Type-3 with performance Y a "Different type", or are > they the "Same Type" given that they're both Type 3 backed by some form > of DDR? Is socket placement of those devices relevant for determining > "Type"? Is whether they are behind a switch relevant for determining > "Type"? "Type" is frustrating when everything we're talking about > managing is "Type-3" with difference performance. > > A concrete example: > To the system, a Multi-Headed Single Logical Device (MH-SLD) looks > exactly the same as an standard SLD. I may want to have some > combination of local memory expansion devices on the majority of my > expansion slots, but reserve 1 slot on each socket for a connection to > the MH-SLD. As of right now: There is no good way to differentiate the > devices in terms of "Type" - and even if you had that, the tiering > system would still lump them together. > > Similarly, an initial run of switches may or may not allow enumeration > of devices behind it (depends on the configuration), so you may end up > with a static numa node that "looks like" another SLD - despite it being > some definition of "GFAM". Do number of hops matter in determining > "Type"? In the original design, the memory devices of same memory type are managed by the same device driver, linked with system in same way (including switches), built with same media. So, the performance is same too. And, same as memory tiers, memory types are orthogonal to sockets. Do you think the definition itself is clear enough? I admit "memory type" is a confusing name. Do you have some better suggestion? > So I really don't think "Type" is useful for determining tier placement. > > As of right now, the system lumps DRAM nodes as one tier, and pretty > much everything else as "the other tier". To me, this patch set is an > initial pass meant to allow user-control over tier composition while > the internal mechanism is sussed out and the environment develops. The patchset to identify the performance of memory devices and put them in proper "memory types" and memory tiers via HMAT has been merged by v6.7-rc1. 07a8bdd4120c (memory tiering: add abstract distance calculation algorithms management, 2023-09-26) d0376aac59a1 (acpi, hmat: refactor hmat_register_target_initiators(), 2023-09-26) 3718c02dbd4c (acpi, hmat: calculate abstract distance with HMAT, 2023-09-26) 6bc2cfdf82d5 (dax, kmem: calculate abstract distance with general interface, 2023-09-26) > In general, a release valve that lets you redefine tiers is very welcome > for testing and validation of different setups while the industry evolves. > > Just my two cents. -- Best Regards, Huang, Ying
