[patch 093/147] phy/drivers/stm32: use HZ macros

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
Subject: phy/drivers/stm32: use HZ macros

HZ unit conversion macros are available in units.h, use them and remove
the duplicate definition.

Link: https://lkml.kernel.org/r/20210816114732.1834145-11-daniel.lezcano@xxxxxxxxxx
Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Cc: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Cc: Christian Eggers <ceggers@xxxxxxx>
Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
Cc: Jonathan Cameron <jic23@xxxxxxxxxx>
Cc: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Cc: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
Cc: Lars-Peter Clausen <lars@xxxxxxxxxx>
Cc: Lukasz Luba <lukasz.luba@xxxxxxx>
Cc: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
Cc: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Cc: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
Cc: Peter Meerwald <pmeerw@xxxxxxxxxx>
Cc: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 drivers/phy/st/phy-stm32-usbphyc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/phy/st/phy-stm32-usbphyc.c~phy-drivers-stm32-use-hz-macros
+++ a/drivers/phy/st/phy-stm32-usbphyc.c
@@ -15,6 +15,7 @@
 #include <linux/of_platform.h>
 #include <linux/phy/phy.h>
 #include <linux/reset.h>
+#include <linux/units.h>
 
 #define STM32_USBPHYC_PLL	0x0
 #define STM32_USBPHYC_MISC	0x8
@@ -47,7 +48,6 @@
 #define PLL_FVCO_MHZ		2880
 #define PLL_INFF_MIN_RATE_HZ	19200000
 #define PLL_INFF_MAX_RATE_HZ	38400000
-#define HZ_PER_MHZ		1000000L
 
 struct pll_params {
 	u8 ndiv;
_




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux