On Monday, September 19, 2011, Anders Eriksson wrote: > kdump produced this oops dump for me. Not sure what triggered it. Apparently, a NULL pointer deref in usb_hcd_irq() after a resume from suspend. Can you check (using gdb) what code corresponds to usb_hcd_irq+0x3 in your kernel? > <6>[ 0.000000] Initializing cgroup subsys cpuset > <6>[ 0.000000] Initializing cgroup subsys cpu > <5>[ 0.000000] Linux version 3.0.3-dirty (root@tv) (gcc version 4.4.5 > (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #37 SMP PREEMPT Mon Aug 22 08:54:35 > CEST 2011 > <6>[ 0.000000] Command line: root=/dev/sda3 hpet=disable crashkernel=128M > <6>[ 0.000000] KERNEL supported cpus: > <6>[ 0.000000] AMD AuthenticAMD > <6>[ 0.000000] BIOS-provided physical RAM map: > <6>[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) > <6>[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) > <6>[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > <6>[ 0.000000] BIOS-e820: 0000000000100000 - 0000000077ee0000 (usable) > <6>[ 0.000000] BIOS-e820: 0000000077ee0000 - 0000000077ee3000 (ACPI NVS) > <6>[ 0.000000] BIOS-e820: 0000000077ee3000 - 0000000077ef0000 (ACPI > data) > <6>[ 0.000000] BIOS-e820: 0000000077ef0000 - 0000000077f00000 (reserved) > <6>[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > <6>[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) > <6>[ 0.000000] NX (Execute Disable) protection: active > <6>[ 0.000000] DMI 2.4 present. > <7>[ 0.000000] DMI: System manufacturer System Product Name/M2A-VM > HDMI, BIOS ASUS M2A-VM HDMI ACPI BIOS Revision 2201 10/22/2008 > <7>[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 > (usable) ==> (reserved) > <7>[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 > (usable) > <6>[ 0.000000] No AGP bridge found > <6>[ 0.000000] last_pfn = 0x77ee0 max_arch_pfn = 0x400000000 > <7>[ 0.000000] MTRR default type: uncachable > <7>[ 0.000000] MTRR fixed ranges enabled: > <7>[ 0.000000] 00000-9FFFF write-back > <7>[ 0.000000] A0000-BFFFF uncachable > <7>[ 0.000000] C0000-C7FFF write-protect > <7>[ 0.000000] C8000-FFFFF uncachable > <7>[ 0.000000] MTRR variable ranges enabled: > <7>[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back > <7>[ 0.000000] 1 base 0040000000 mask FFE0000000 write-back > <7>[ 0.000000] 2 base 0060000000 mask FFF0000000 write-back > <7>[ 0.000000] 3 base 0070000000 mask FFF8000000 write-back > <7>[ 0.000000] 4 base 0077F00000 mask FFFFF00000 uncachable > <7>[ 0.000000] 5 disabled > <7>[ 0.000000] 6 disabled > <7>[ 0.000000] 7 disabled > <6>[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new > 0x7010600070106 > <6>[ 0.000000] found SMP MP-table at [ffff8800000f6560] f6560 > <7>[ 0.000000] initial memory mapped : 0 - 20000000 > <7>[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 > size 20480 > <6>[ 0.000000] init_memory_mapping: 0000000000000000-0000000077ee0000 > <7>[ 0.000000] 0000000000 - 0077e00000 page 2M > <7>[ 0.000000] 0077e00000 - 0077ee0000 page 4k > <7>[ 0.000000] kernel direct mapping tables up to 77ee0000 @ > 77edc000-77ee0000 > <6>[ 0.000000] Reserving 128MB of memory at 768MB for crashkernel > (System RAM: 1918MB) > <4>[ 0.000000] ACPI: RSDP 00000000000f8210 00024 (v02 ATI ) > <4>[ 0.000000] ACPI: XSDT 0000000077ee3100 00044 (v01 ATI ASUSACPI > 42302E31 AWRD 00000000) > <4>[ 0.000000] ACPI: FACP 0000000077ee8500 000F4 (v03 ATI ASUSACPI > 42302E31 AWRD 00000000) > <4>[ 0.000000] ACPI: DSDT 0000000077ee3280 05210 (v01 ATI ASUSACPI > 00001000 MSFT 03000000) > <4>[ 0.000000] ACPI: FACS 0000000077ee0000 00040 > <4>[ 0.000000] ACPI: SSDT 0000000077ee8740 002CC (v01 PTLTD POWERNOW > 00000001 LTP 00000001) > <4>[ 0.000000] ACPI: MCFG 0000000077ee8b00 0003C (v01 ATI ASUSACPI > 42302E31 AWRD 00000000) > <4>[ 0.000000] ACPI: APIC 0000000077ee8640 00084 (v01 ATI ASUSACPI > 42302E31 AWRD 00000000) > <7>[ 0.000000] ACPI: Local APIC address 0xfee00000 > <7>[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> > [ffff880075800000-ffff8800773fffff] on node 0 > <4>[ 0.000000] Zone PFN ranges: > <4>[ 0.000000] DMA 0x00000010 -> 0x00001000 > <4>[ 0.000000] DMA32 0x00001000 -> 0x00100000 > <4>[ 0.000000] Normal empty > <4>[ 0.000000] Movable zone start PFN for each node > <4>[ 0.000000] early_node_map[2] active PFN ranges > <4>[ 0.000000] 0: 0x00000010 -> 0x0000009f > <4>[ 0.000000] 0: 0x00000100 -> 0x00077ee0 > <7>[ 0.000000] On node 0 totalpages: 491119 > <7>[ 0.000000] DMA zone: 56 pages used for memmap > <7>[ 0.000000] DMA zone: 5 pages reserved > <7>[ 0.000000] DMA zone: 3922 pages, LIFO batch:0 > <7>[ 0.000000] DMA32 zone: 6661 pages used for memmap > <7>[ 0.000000] DMA32 zone: 480475 pages, LIFO batch:31 > <6>[ 0.000000] Detected use of extended apic ids on hypertransport bus > <6>[ 0.000000] ACPI: PM-Timer IO Port: 0x4008 > <7>[ 0.000000] ACPI: Local APIC address 0xfee00000 > <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) > <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) > <6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > <6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > <6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) > <6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) > <6>[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) > <6>[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, > GSI 0-23 > <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > <7>[ 0.000000] ACPI: IRQ0 used by override. > <7>[ 0.000000] ACPI: IRQ2 used by override. > <7>[ 0.000000] ACPI: IRQ9 used by override. > <6>[ 0.000000] Using ACPI (MADT) for SMP configuration information > <6>[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs > <7>[ 0.000000] nr_irqs_gsi: 40 > <6>[ 0.000000] PM: Registered nosave memory: 000000000009f000 - > 00000000000a0000 > <6>[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - > 00000000000f0000 > <6>[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - > 0000000000100000 > <6>[ 0.000000] Allocating PCI resources starting at 77f00000 (gap: > 77f00000:68100000) > <6>[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 > nr_node_ids:1 > <6>[ 0.000000] PERCPU: Embedded 24 pages/cpu @ffff880077c00000 s68800 > r8192 d21312 u524288 > <7>[ 0.000000] pcpu-alloc: s68800 r8192 d21312 u524288 alloc=1*2097152 > <7>[ 0.000000] pcpu-alloc: [0] 0 1 2 3 > <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping > on. Total pages: 484397 > <5>[ 0.000000] Kernel command line: root=/dev/sda3 hpet=disable > crashkernel=128M > <6>[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > <6>[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, > 2097152 bytes) > <6>[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, > 1048576 bytes) > <6>[ 0.000000] Checking aperture... > <6>[ 0.000000] No AGP bridge found > <6>[ 0.000000] Node 0: aperture @ 266000000 size 32 MB > <6>[ 0.000000] Aperture beyond 4GB. Ignoring. > <6>[ 0.000000] Memory: 1792880k/1964928k available (4899k kernel > code, 452k absent, 171596k reserved, 2346k data, 464k init) > <6>[ 0.000000] Preemptible hierarchical RCU implementation. > <6>[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 > <6>[ 0.000000] NR_IRQS:384 > <6>[ 0.000000] Console: colour VGA+ 80x25 > <6>[ 0.000000] console [tty0] enabled > <6>[ 0.000000] allocated 15728640 bytes of page_cgroup > <6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't > want memory cgroups > <4>[ 0.000000] Fast TSC calibration using PIT > <4>[ 0.000000] Detected 2799.546 MHz processor. > <6>[ 0.000000] Marking TSC unstable due to TSCs unsynchronized > <6>[ 0.002039] Calibrating delay loop (skipped), value calculated > using timer frequency.. 5599.09 BogoMIPS (lpj=2799546) > <6>[ 0.002109] pid_max: default: 32768 minimum: 301 > <6>[ 0.002204] Mount-cache hash table entries: 256 > <6>[ 0.002392] Initializing cgroup subsys cpuacct > <6>[ 0.002435] Initializing cgroup subsys memory > <6>[ 0.002480] Initializing cgroup subsys devices > <6>[ 0.002515] Initializing cgroup subsys freezer > <6>[ 0.002549] Initializing cgroup subsys blkio > <7>[ 0.003019] tseg: 0077f00000 > <6>[ 0.003021] CPU: Physical Processor ID: 0 > <6>[ 0.003056] CPU: Processor Core ID: 0 > <6>[ 0.003090] mce: CPU supports 5 MCE banks > <6>[ 0.003132] using AMD E400 aware idle routine > <6>[ 0.003198] ACPI: Core revision 20110413 > <6>[ 0.005568] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > <6>[ 0.016152] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ > stepping 03 > <6>[ 0.016998] Performance Events: AMD PMU driver. > <6>[ 0.016998] ... version: 0 > <6>[ 0.016998] ... bit width: 48 > <6>[ 0.016998] ... generic registers: 4 > <6>[ 0.016998] ... value mask: 0000ffffffffffff > <6>[ 0.016998] ... max period: 00007fffffffffff > <6>[ 0.016998] ... fixed-purpose events: 0 > <6>[ 0.016998] ... event mask: 000000000000000f > <6>[ 0.028011] Booting Node 0, Processors #1 > <7>[ 0.028073] smpboot cpu 1: start_ip = 9a000 > <6>[ 0.099035] Brought up 2 CPUs > <6>[ 0.099070] Total of 2 processors activated (11197.89 BogoMIPS). > <6>[ 0.099465] PM: Registering ACPI NVS region at 77ee0000 (12288 bytes) > <6>[ 0.099465] NET: Registered protocol family 16 > <7>[ 0.100024] node 0 link 0: io port [c000, ffff] > <6>[ 0.100024] TOM: 0000000080000000 aka 2048M > <7>[ 0.100043] node 0 link 0: mmio [a0000, bffff] > <7>[ 0.100046] node 0 link 0: mmio [80000000, dfffffff] > <7>[ 0.100048] node 0 link 0: mmio [f0000000, fe02ffff] > <7>[ 0.100051] node 0 link 0: mmio [e0000000, e03fffff] > <7>[ 0.100053] bus: [00, 03] on node 0 link 0 > <7>[ 0.100056] bus: 00 index 0 [io 0x0000-0xffff] > <7>[ 0.100058] bus: 00 index 1 [mem 0x000a0000-0x000bffff] > <7>[ 0.100060] bus: 00 index 2 [mem 0x80000000-0xefffffff] > <7>[ 0.100062] bus: 00 index 3 [mem 0xf0000000-0xfcffffffff] > <6>[ 0.100069] ACPI: bus type pci registered > <6>[ 0.100113] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem > 0xe0000000-0xefffffff] (base 0xe0000000) > <6>[ 0.100113] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved > in E820 > <6>[ 0.116130] PCI: Using configuration type 1 for base access > <6>[ 0.121108] bio: create slab <bio-0> at 0 > <7>[ 0.122550] ACPI: EC: Look up EC in DSDT > <6>[ 0.125943] ACPI: Interpreter enabled > <6>[ 0.125981] ACPI: (supports S0 S1 S3 S4 S5) > <6>[ 0.126152] ACPI: Using IOAPIC for interrupt routing > <6>[ 0.130214] ACPI: No dock devices found. > <6>[ 0.130214] HEST: Table not found. > <6>[ 0.130991] PCI: Using host bridge windows from ACPI; if > necessary, use "pci=nocrs" and report a bug > <6>[ 0.131081] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > <6>[ 0.131147] pci_root PNP0A03:00: host bridge window [io > 0x0000-0x0cf7] > <6>[ 0.131147] pci_root PNP0A03:00: host bridge window [io > 0x0d00-0xffff] > <6>[ 0.131147] pci_root PNP0A03:00: host bridge window [mem > 0x000a0000-0x000bffff] > <6>[ 0.131182] pci_root PNP0A03:00: host bridge window [mem > 0x000c0000-0x000dffff] > <6>[ 0.131221] pci_root PNP0A03:00: host bridge window [mem > 0x80000000-0xfebfffff] > <7>[ 0.131269] pci 0000:00:00.0: [1002:7910] type 0 class 0x000600 > <7>[ 0.131294] pci 0000:00:01.0: [1002:7912] type 1 class 0x000604 > <7>[ 0.131325] pci 0000:00:07.0: [1002:7917] type 1 class 0x000604 > <7>[ 0.131345] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold > <7>[ 0.131348] pci 0000:00:07.0: PME# disabled > <7>[ 0.131377] pci 0000:00:12.0: [1002:4380] type 0 class 0x000101 > <7>[ 0.131394] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07] > <7>[ 0.131404] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03] > <7>[ 0.131414] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07] > <7>[ 0.131424] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03] > <7>[ 0.131434] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f] > <7>[ 0.131444] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] > <6>[ 0.131465] pci 0000:00:12.0: set SATA to AHCI mode > <7>[ 0.131527] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03 > <7>[ 0.131541] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff] > <7>[ 0.131605] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03 > <7>[ 0.131619] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff] > <7>[ 0.131685] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03 > <7>[ 0.131698] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff] > <7>[ 0.131763] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03 > <7>[ 0.131776] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff] > <7>[ 0.132031] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03 > <7>[ 0.132045] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff] > <7>[ 0.132115] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03 > <7>[ 0.132135] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff] > <7>[ 0.132205] pci 0000:00:13.5: supports D1 D2 > <7>[ 0.132208] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot > <7>[ 0.132212] pci 0000:00:13.5: PME# disabled > <7>[ 0.132233] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 > <7>[ 0.132256] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f] > <7>[ 0.132332] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101 > <7>[ 0.132346] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] > <7>[ 0.132356] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] > <7>[ 0.132366] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] > <7>[ 0.132376] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] > <7>[ 0.132386] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f] > <7>[ 0.132423] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 > <7>[ 0.132445] pci 0000:00:14.2: reg 10: [mem 0xfe020000-0xfe023fff > 64bit] > <7>[ 0.132503] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold > <7>[ 0.132507] pci 0000:00:14.2: PME# disabled > <7>[ 0.132522] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601 > <7>[ 0.132595] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 > <7>[ 0.132640] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 > <7>[ 0.132655] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 > <7>[ 0.132668] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 > <7>[ 0.132681] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 > <7>[ 0.132720] pci 0000:01:05.0: [1002:791e] type 0 class 0x000300 > <7>[ 0.132728] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff > 64bit pref] > <7>[ 0.132734] pci 0000:01:05.0: reg 18: [mem 0xfdbe0000-0xfdbeffff > 64bit] > <7>[ 0.132738] pci 0000:01:05.0: reg 20: [io 0xde00-0xdeff] > <7>[ 0.132742] pci 0000:01:05.0: reg 24: [mem 0xfda00000-0xfdafffff] > <7>[ 0.132753] pci 0000:01:05.0: supports D1 D2 > <7>[ 0.132762] pci 0000:01:05.2: [1002:7919] type 0 class 0x000403 > <7>[ 0.132770] pci 0000:01:05.2: reg 10: [mem 0xfdbfc000-0xfdbfffff > 64bit] > <6>[ 0.132800] pci 0000:00:01.0: PCI bridge to [bus 01-01] > <7>[ 0.132837] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] > <7>[ 0.132840] pci 0000:00:01.0: bridge window [mem > 0xfda00000-0xfdbfffff] > <7>[ 0.132844] pci 0000:00:01.0: bridge window [mem > 0xf0000000-0xf7ffffff 64bit pref] > <7>[ 0.132883] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 > <7>[ 0.132897] pci 0000:02:00.0: reg 10: [io 0xee00-0xeeff] > <7>[ 0.132921] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff > 64bit] > <7>[ 0.132949] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] > <7>[ 0.133007] pci 0000:02:00.0: supports D1 D2 > <7>[ 0.133008] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold > <7>[ 0.133013] pci 0000:02:00.0: PME# disabled > <6>[ 0.133027] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe > device. You can enable it with 'pcie_aspm=force' > <6>[ 0.133073] pci 0000:00:07.0: PCI bridge to [bus 02-02] > <7>[ 0.133110] pci 0000:00:07.0: bridge window [io 0xe000-0xefff] > <7>[ 0.133113] pci 0000:00:07.0: bridge window [mem > 0xfdf00000-0xfdffffff] > <7>[ 0.133116] pci 0000:00:07.0: bridge window [mem > 0xfdc00000-0xfdcfffff 64bit pref] > <7>[ 0.133151] pci 0000:03:06.0: [1131:7133] type 0 class 0x000480 > <7>[ 0.133173] pci 0000:03:06.0: reg 10: [mem 0xfdeff000-0xfdeff7ff] > <7>[ 0.133260] pci 0000:03:06.0: supports D1 D2 > <7>[ 0.133284] pci 0000:03:07.0: [1106:3044] type 0 class 0x000c00 > <7>[ 0.133307] pci 0000:03:07.0: reg 10: [mem 0xfdefe000-0xfdefe7ff] > <7>[ 0.133320] pci 0000:03:07.0: reg 14: [io 0xcf00-0xcf7f] > <7>[ 0.133401] pci 0000:03:07.0: supports D2 > <7>[ 0.133402] pci 0000:03:07.0: PME# supported from D2 D3hot D3cold > <7>[ 0.133408] pci 0000:03:07.0: PME# disabled > <6>[ 0.133452] pci 0000:00:14.4: PCI bridge to [bus 03-03] > (subtractive decode) > <7>[ 0.133490] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] > <7>[ 0.133495] pci 0000:00:14.4: bridge window [mem > 0xfde00000-0xfdefffff] > <7>[ 0.133499] pci 0000:00:14.4: bridge window [mem > 0xfdd00000-0xfddfffff pref] > <7>[ 0.133502] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] > (subtractive decode) > <7>[ 0.133504] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] > (subtractive decode) > <7>[ 0.133507] pci 0000:00:14.4: bridge window [mem > 0x000a0000-0x000bffff] (subtractive decode) > <7>[ 0.133509] pci 0000:00:14.4: bridge window [mem > 0x000c0000-0x000dffff] (subtractive decode) > <7>[ 0.133512] pci 0000:00:14.4: bridge window [mem > 0x80000000-0xfebfffff] (subtractive decode) > <7>[ 0.133522] pci_bus 0000:00: on NUMA node 0 > <7>[ 0.133525] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > <7>[ 0.133673] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] > <7>[ 0.133740] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] > <7>[ 0.133765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] > <6>[ 0.133794] pci0000:00: Requesting ACPI _OSC control (0x1d) > <6>[ 0.133830] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), > returned control mask: 0x1d > <6>[ 0.133869] ACPI _OSC control for PCIe not granted, disabling ASPM > <6>[ 0.146517] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) > *0, disabled. > <6>[ 0.147321] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) > *0, disabled. > <6>[ 0.147709] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) > *0, disabled. > <6>[ 0.148081] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) > *0, disabled. > <6>[ 0.148469] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) > *0, disabled. > <6>[ 0.148856] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) > *0, disabled. > <6>[ 0.149257] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11) > <6>[ 0.149581] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) > *0, disabled. > <6>[ 0.150017] vgaarb: device added: > PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none > <6>[ 0.150048] vgaarb: loaded > <6>[ 0.150081] vgaarb: bridge control possible 0000:01:05.0 > <5>[ 0.150196] SCSI subsystem initialized > <7>[ 0.150196] libata version 3.00 loaded. > <6>[ 0.150196] usbcore: registered new interface driver usbfs > <6>[ 0.150196] usbcore: registered new interface driver hub > <6>[ 0.150196] usbcore: registered new device driver usb > <6>[ 0.151009] Advanced Linux Sound Architecture Driver Version 1.0.24. > <6>[ 0.151045] PCI: Using ACPI for IRQ routing > <7>[ 0.159993] PCI: pci_cache_line_size set to 64 bytes > <7>[ 0.160072] reserve RAM buffer: 000000000009f000 - 000000000009ffff > <7>[ 0.160075] reserve RAM buffer: 0000000077ee0000 - 0000000077ffffff > <6>[ 0.160095] Bluetooth: Core ver 2.16 > <6>[ 0.160095] NET: Registered protocol family 31 > <6>[ 0.160095] Bluetooth: HCI device and connection manager initialized > <6>[ 0.160095] Bluetooth: HCI socket layer initialized > <6>[ 0.160105] Bluetooth: L2CAP socket layer initialized > <6>[ 0.160144] Bluetooth: SCO socket layer initialized > <6>[ 0.160144] pnp: PnP ACPI init > <6>[ 0.160144] ACPI: bus type pnp registered > <7>[ 0.160199] pnp 00:00: [bus 00-ff] > <7>[ 0.160202] pnp 00:00: [io 0x0cf8-0x0cff] > <7>[ 0.160204] pnp 00:00: [io 0x0000-0x0cf7 window] > <7>[ 0.160207] pnp 00:00: [io 0x0d00-0xffff window] > <7>[ 0.160209] pnp 00:00: [mem 0x000a0000-0x000bffff window] > <7>[ 0.160211] pnp 00:00: [mem 0x000c0000-0x000dffff window] > <7>[ 0.160213] pnp 00:00: [mem 0x80000000-0xfebfffff window] > <7>[ 0.161015] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) > <7>[ 0.161064] pnp 00:01: [io 0x4100-0x411f] > <7>[ 0.161066] pnp 00:01: [io 0x0228-0x022f] > <7>[ 0.161068] pnp 00:01: [io 0x040b] > <7>[ 0.161070] pnp 00:01: [io 0x04d6] > <7>[ 0.161072] pnp 00:01: [io 0x0c00-0x0c01] > <7>[ 0.161074] pnp 00:01: [io 0x0c14] > <7>[ 0.161076] pnp 00:01: [io 0x0c50-0x0c52] > <7>[ 0.161078] pnp 00:01: [io 0x0c6c-0x0c6d] > <7>[ 0.161079] pnp 00:01: [io 0x0c6f] > <7>[ 0.161081] pnp 00:01: [io 0x0cd0-0x0cd1] > <7>[ 0.161083] pnp 00:01: [io 0x0cd2-0x0cd3] > <7>[ 0.161087] pnp 00:01: [io 0x0cd4-0x0cdf] > <7>[ 0.161089] pnp 00:01: [io 0x4000-0x40fe] > <7>[ 0.161091] pnp 00:01: [io 0x4210-0x4217] > <7>[ 0.161093] pnp 00:01: [io 0x0b10-0x0b1f] > <7>[ 0.161095] pnp 00:01: [mem 0x00000000-0x00000fff window] > <7>[ 0.161097] pnp 00:01: [mem 0xfee00400-0xfee00fff window] > <4>[ 0.161131] pnp 00:01: disabling [mem 0x00000000-0x00000fff > window] because it overlaps 0000:02:00.0 BAR 6 [mem > 0x00000000-0x0001ffff pref] > <6>[ 0.161198] system 00:01: [io 0x4100-0x411f] has been reserved > <6>[ 0.161198] system 00:01: [io 0x0228-0x022f] has been reserved > <6>[ 0.161198] system 00:01: [io 0x040b] has been reserved > <6>[ 0.161198] system 00:01: [io 0x04d6] has been reserved > <6>[ 0.163988] system 00:01: [io 0x0c00-0x0c01] has been reserved > <6>[ 0.164023] system 00:01: [io 0x0c14] has been reserved > <6>[ 0.164058] system 00:01: [io 0x0c50-0x0c52] has been reserved > <6>[ 0.164094] system 00:01: [io 0x0c6c-0x0c6d] has been reserved > <6>[ 0.164129] system 00:01: [io 0x0c6f] has been reserved > <6>[ 0.164164] system 00:01: [io 0x0cd0-0x0cd1] has been reserved > <6>[ 0.164199] system 00:01: [io 0x0cd2-0x0cd3] has been reserved > <6>[ 0.164235] system 00:01: [io 0x0cd4-0x0cdf] has been reserved > <6>[ 0.164270] system 00:01: [io 0x4000-0x40fe] has been reserved > <6>[ 0.164306] system 00:01: [io 0x4210-0x4217] has been reserved > <6>[ 0.164342] system 00:01: [io 0x0b10-0x0b1f] has been reserved > <6>[ 0.164378] system 00:01: [mem 0xfee00400-0xfee00fff window] has > been reserved > <7>[ 0.164418] system 00:01: Plug and Play ACPI device, IDs PNP0c02 > (active) > <7>[ 0.164505] pnp 00:02: [dma 4] > <7>[ 0.164507] pnp 00:02: [io 0x0000-0x000f] > <7>[ 0.164509] pnp 00:02: [io 0x0080-0x0090] > <7>[ 0.164511] pnp 00:02: [io 0x0094-0x009f] > <7>[ 0.164513] pnp 00:02: [io 0x00c0-0x00df] > <7>[ 0.164538] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) > <7>[ 0.164538] pnp 00:03: [io 0x0070-0x0073] > <7>[ 0.164538] pnp 00:03: [irq 8] > <7>[ 0.164538] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) > <7>[ 0.164538] pnp 00:04: [io 0x0061] > <7>[ 0.164538] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) > <7>[ 0.164538] pnp 00:05: [io 0x00f0-0x00ff] > <7>[ 0.164538] pnp 00:05: [irq 13] > <7>[ 0.164997] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) > <7>[ 0.165014] pnp 00:06: [io 0x0010-0x001f] > <7>[ 0.165015] pnp 00:06: [io 0x0022-0x003f] > <7>[ 0.165017] pnp 00:06: [io 0x0044-0x005f] > <7>[ 0.165019] pnp 00:06: [io 0x0062-0x0063] > <7>[ 0.165021] pnp 00:06: [io 0x0065-0x006f] > <7>[ 0.165023] pnp 00:06: [io 0x0074-0x007f] > <7>[ 0.165025] pnp 00:06: [io 0x0091-0x0093] > <7>[ 0.165027] pnp 00:06: [io 0x00a2-0x00bf] > <7>[ 0.165029] pnp 00:06: [io 0x00e0-0x00ef] > <7>[ 0.165031] pnp 00:06: [io 0x04d0-0x04d1] > <7>[ 0.165033] pnp 00:06: [io 0x0220-0x0225] > <6>[ 0.165080] system 00:06: [io 0x04d0-0x04d1] has been reserved > <6>[ 0.165080] system 00:06: [io 0x0220-0x0225] has been reserved > <7>[ 0.165080] system 00:06: Plug and Play ACPI device, IDs PNP0c02 > (active) > <7>[ 0.165195] pnp 00:07: [io 0x03f0-0x03f5] > <7>[ 0.165197] pnp 00:07: [io 0x03f7] > <7>[ 0.165206] pnp 00:07: [irq 6] > <7>[ 0.165208] pnp 00:07: [dma 2] > <7>[ 0.165252] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) > <7>[ 0.165252] pnp 00:08: [io 0x03f8-0x03ff] > <7>[ 0.165252] pnp 00:08: [irq 4] > <7>[ 0.165252] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) > <7>[ 0.165252] pnp 00:09: [io 0x0378-0x037f] > <7>[ 0.165253] pnp 00:09: [irq 7] > <7>[ 0.165301] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active) > <7>[ 0.166061] pnp 00:0a: [mem 0xe0000000-0xefffffff] > <6>[ 0.166105] system 00:0a: [mem 0xe0000000-0xefffffff] has been > reserved > <7>[ 0.166105] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 > (active) > <7>[ 0.166157] pnp 00:0b: [mem 0x000cd600-0x000cffff] > <7>[ 0.166159] pnp 00:0b: [mem 0x000f0000-0x000f7fff] > <7>[ 0.166161] pnp 00:0b: [mem 0x000f8000-0x000fbfff] > <7>[ 0.166163] pnp 00:0b: [mem 0x000fc000-0x000fffff] > <7>[ 0.166165] pnp 00:0b: [mem 0x77ef0000-0x77feffff] > <7>[ 0.166167] pnp 00:0b: [mem 0xfed00000-0xfed000ff] > <7>[ 0.166171] pnp 00:0b: [mem 0x77ee0000-0x77efffff] > <7>[ 0.166173] pnp 00:0b: [mem 0xffff0000-0xffffffff] > <7>[ 0.166175] pnp 00:0b: [mem 0x00000000-0x0009ffff] > <7>[ 0.166177] pnp 00:0b: [mem 0x00100000-0x77edffff] > <7>[ 0.166180] pnp 00:0b: [mem 0x77ff0000-0x7ffeffff] > <7>[ 0.166182] pnp 00:0b: [mem 0xfec00000-0xfec00fff] > <7>[ 0.166184] pnp 00:0b: [mem 0xfee00000-0xfee00fff] > <7>[ 0.166186] pnp 00:0b: [mem 0xfff80000-0xfffeffff] > <6>[ 0.166237] system 00:0b: [mem 0x000cd600-0x000cffff] has been > reserved > <6>[ 0.166237] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be > reserved > <6>[ 0.166237] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be > reserved > <6>[ 0.166237] system 00:0b: [mem 0x000fc000-0x000fffff] could not be > reserved > <6>[ 0.166237] system 00:0b: [mem 0x77ef0000-0x77feffff] could not be > reserved > <6>[ 0.166237] system 00:0b: [mem 0xfed00000-0xfed000ff] has been > reserved > <6>[ 0.166237] system 00:0b: [mem 0x77ee0000-0x77efffff] could not be > reserved > <6>[ 0.166251] system 00:0b: [mem 0xffff0000-0xffffffff] has been > reserved > <6>[ 0.166288] system 00:0b: [mem 0x00000000-0x0009ffff] could not be > reserved > <6>[ 0.166324] system 00:0b: [mem 0x00100000-0x77edffff] could not be > reserved > <6>[ 0.166360] system 00:0b: [mem 0x77ff0000-0x7ffeffff] could not be > reserved > <6>[ 0.166396] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be > reserved > <6>[ 0.166432] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be > reserved > <6>[ 0.166468] system 00:0b: [mem 0xfff80000-0xfffeffff] has been > reserved > <7>[ 0.166504] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 > (active) > <6>[ 0.166511] pnp: PnP ACPI: found 12 devices > <6>[ 0.166545] ACPI: ACPI bus type pnp unregistered > <6>[ 0.174647] Switching to clocksource acpi_pm > <7>[ 0.174723] PCI: max bus depth: 1 pci_try_num: 2 > <6>[ 0.174741] pci 0000:00:01.0: PCI bridge to [bus 01-01] > <6>[ 0.174777] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] > <6>[ 0.174814] pci 0000:00:01.0: bridge window [mem > 0xfda00000-0xfdbfffff] > <6>[ 0.174850] pci 0000:00:01.0: bridge window [mem > 0xf0000000-0xf7ffffff 64bit pref] > <6>[ 0.174894] pci 0000:02:00.0: BAR 6: assigned [mem > 0xfdc00000-0xfdc1ffff pref] > <6>[ 0.174933] pci 0000:00:07.0: PCI bridge to [bus 02-02] > <6>[ 0.174690] Switched to NOHz mode on CPU #0 > <6>[ 0.174933] Switched to NOHz mode on CPU #1 > <6>[ 0.174933] pci 0000:00:07.0: bridge window [io 0xe000-0xefff] > <6>[ 0.174933] pci 0000:00:07.0: bridge window [mem > 0xfdf00000-0xfdffffff] > <6>[ 0.174933] pci 0000:00:07.0: bridge window [mem > 0xfdc00000-0xfdcfffff 64bit pref] > <6>[ 0.174933] pci 0000:00:14.4: PCI bridge to [bus 03-03] > <6>[ 0.174933] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] > <6>[ 0.174933] pci 0000:00:14.4: bridge window [mem > 0xfde00000-0xfdefffff] > <6>[ 0.174933] pci 0000:00:14.4: bridge window [mem > 0xfdd00000-0xfddfffff pref] > <7>[ 0.174933] pci 0000:00:07.0: setting latency timer to 64 > <7>[ 0.174933] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] > <7>[ 0.174933] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] > <7>[ 0.174933] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] > <7>[ 0.174933] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] > <7>[ 0.174933] pci_bus 0000:00: resource 8 [mem 0x80000000-0xfebfffff] > <7>[ 0.174933] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] > <7>[ 0.174933] pci_bus 0000:01: resource 1 [mem 0xfda00000-0xfdbfffff] > <7>[ 0.174933] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff > 64bit pref] > <7>[ 0.174933] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] > <7>[ 0.174933] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff] > <7>[ 0.174933] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff > 64bit pref] > <7>[ 0.174933] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] > <7>[ 0.174933] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff] > <7>[ 0.174933] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff > pref] > <7>[ 0.174933] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] > <7>[ 0.174933] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] > <7>[ 0.174933] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] > <7>[ 0.174933] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff] > <7>[ 0.174933] pci_bus 0000:03: resource 8 [mem 0x80000000-0xfebfffff] > <6>[ 0.174933] NET: Registered protocol family 2 > <6>[ 0.174933] IP route cache hash table entries: 65536 (order: 7, > 524288 bytes) > <6>[ 0.175314] TCP established hash table entries: 262144 (order: 10, > 4194304 bytes) > <6>[ 0.177783] TCP bind hash table entries: 65536 (order: 8, 1048576 > bytes) > <6>[ 0.178410] TCP: Hash tables configured (established 262144 bind > 65536) > <6>[ 0.178446] TCP reno registered > <6>[ 0.178482] UDP hash table entries: 1024 (order: 3, 32768 bytes) > <6>[ 0.178534] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) > <6>[ 0.178723] NET: Registered protocol family 1 > <6>[ 0.178863] RPC: Registered named UNIX socket transport module. > <6>[ 0.178900] RPC: Registered udp transport module. > <6>[ 0.178934] RPC: Registered tcp transport module. > <6>[ 0.178969] RPC: Registered tcp NFSv4.1 backchannel transport module. > <7>[ 0.385043] pci 0000:01:05.0: Boot video device > <7>[ 0.385055] PCI: CLS 32 bytes, default 64 > <6>[ 0.386163] audit: initializing netlink socket (disabled) > <5>[ 0.386207] type=2000 audit(1316374513.386:1): initialized > <6>[ 0.393104] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). > <6>[ 0.393446] msgmni has been set to 3501 > <6>[ 0.393892] Block layer SCSI generic (bsg) driver version 0.4 > loaded (major 253) > <6>[ 0.393933] io scheduler noop registered > <6>[ 0.393986] io scheduler cfq registered (default) > <7>[ 0.394179] pcieport 0000:00:07.0: setting latency timer to 64 > <7>[ 0.394205] pcieport 0000:00:07.0: irq 40 for MSI/MSI-X > <6>[ 0.394864] input: Power Button as > /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 > <6>[ 0.394909] ACPI: Power Button [PWRB] > <6>[ 0.395047] input: Power Button as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > <6>[ 0.395087] ACPI: Power Button [PWRF] > <6>[ 0.395230] ACPI: Fan [FAN] (on) > <7>[ 0.395360] ACPI: acpi_idle registered with cpuidle > <4>[ 0.396661] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has > no elements (empty) (20110413/nspredef-456) > <3>[ 0.396763] ACPI: [Package] has zero elements (ffff8800742f1f40) > <4>[ 0.396798] ACPI: Invalid passive threshold > <6>[ 0.396978] thermal LNXTHERM:00: registered as thermal_zone0 > <6>[ 0.397047] ACPI: Thermal Zone [THRM] (40 C) > <6>[ 0.397129] ERST: Table is not found! > <6>[ 0.397250] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > <6>[ 0.417954] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > <6>[ 0.496800] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > <6>[ 0.508337] [drm] Initialized drm 1.1.0 20060810 > <6>[ 0.508423] [drm] radeon defaulting to kernel modesetting. > <6>[ 0.508459] [drm] radeon kernel modesetting enabled. > <6>[ 0.508545] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) > -> IRQ 18 > <6>[ 0.508762] [drm] initializing kernel modesetting (RS690 > 0x1002:0x791E 0x1043:0x826D). > <6>[ 0.508817] [drm] register mmio base: 0xFDBE0000 > <6>[ 0.508852] [drm] register mmio size: 65536 > <6>[ 0.510386] ATOM BIOS: ATI > <6>[ 0.510436] radeon 0000:01:05.0: VRAM: 128M 0x0000000078000000 - > 0x000000007FFFFFFF (128M used) > <6>[ 0.510476] radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - > 0x000000009FFFFFFF > <6>[ 0.510516] [drm] Supports vblank timestamp caching Rev 1 > (10.10.2010). > <6>[ 0.510552] [drm] Driver supports precise vblank timestamp query. > <6>[ 0.510611] [drm] radeon: irq initialized. > <6>[ 0.511162] [drm] Detected VRAM RAM=128M, BAR=128M > <6>[ 0.511202] [drm] RAM width 128bits DDR > <6>[ 0.511317] [TTM] Zone kernel: Available graphics memory: 896440 kiB. > <6>[ 0.511356] [TTM] Initializing pool allocator. > <6>[ 0.511416] [drm] radeon: 128M of VRAM memory ready > <6>[ 0.511451] [drm] radeon: 512M of GTT memory ready. > <6>[ 0.511487] [drm] GART: num cpu pages 131072, num gpu pages 131072 > <6>[ 0.515340] [drm] radeon: 1 quad pipes, 1 z pipes initialized. > <6>[ 0.521223] radeon 0000:01:05.0: WB enabled > <6>[ 0.521358] [drm] Loading RS690/RS740 Microcode > <6>[ 0.521544] [drm] radeon: ring at 0x0000000080001000 > <6>[ 0.521595] [drm] ring test succeeded in 1 usecs > <6>[ 0.521725] [drm] radeon: ib pool ready. > <6>[ 0.521771] [drm] ib test succeeded in 0 usecs > <7>[ 0.521809] failed to evaluate ATIF got AE_BAD_PARAMETER > <6>[ 0.522489] [drm] Radeon Display Connectors > <6>[ 0.522524] [drm] Connector 0: > <6>[ 0.522557] [drm] VGA > <6>[ 0.522591] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 > 0x7e5c 0x7e4c > <6>[ 0.522629] [drm] Encoders: > <6>[ 0.522662] [drm] CRT1: INTERNAL_KLDSCP_DAC1 > <6>[ 0.522696] [drm] Connector 1: > <6>[ 0.522729] [drm] S-video > <6>[ 0.522762] [drm] Encoders: > <6>[ 0.522795] [drm] TV1: INTERNAL_KLDSCP_DAC1 > <6>[ 0.522829] [drm] Connector 2: > <6>[ 0.522862] [drm] HDMI-A > <6>[ 0.522895] [drm] HPD2 > <6>[ 0.522929] [drm] DDC: 0x7e40 0x7e60 0x7e44 0x7e64 0x7e48 0x7e68 > 0x7e4c 0x7e6c > <6>[ 0.522967] [drm] Encoders: > <6>[ 0.523016] [drm] DFP2: INTERNAL_DDI > <6>[ 0.523049] [drm] Connector 3: > <6>[ 0.523082] [drm] DVI-D > <6>[ 0.523116] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 > 0x7e4c 0x7e5c > <6>[ 0.523154] [drm] Encoders: > <6>[ 0.523187] [drm] DFP3: INTERNAL_LVTM1 > <6>[ 0.574522] [drm] Radeon display connector VGA-1: Found valid EDID > <6>[ 0.675501] [drm] Radeon display connector HDMI-A-1: Found valid EDID > <6>[ 0.685115] [drm] Radeon display connector DVI-D-1: No monitor > connected or invalid EDID > <6>[ 0.933839] [drm] fb mappable at 0xF0040000 > <6>[ 0.933905] [drm] vram apper at 0xF0000000 > <6>[ 0.933938] [drm] size 8294400 > <6>[ 0.933972] [drm] fb depth is 24 > <6>[ 0.934014] [drm] pitch is 7680 > <6>[ 0.934131] fbcon: radeondrmfb (fb0) is primary device > <6>[ 0.962975] Console: switching to colour frame buffer device 240x67 > <6>[ 0.972371] fb0: radeondrmfb frame buffer device > <6>[ 0.972410] drm: registered panic notifier > <6>[ 0.972440] [drm] Initialized radeon 2.10.0 20080528 for > 0000:01:05.0 on minor 0 > <6>[ 0.974922] brd: module loaded > <6>[ 0.976129] loop: module loaded > <6>[ 0.976212] Uniform Multi-Platform E-IDE driver > <6>[ 0.976392] ide-gd driver 1.18 > <7>[ 0.976659] ahci 0000:00:12.0: version 3.0 > <6>[ 0.976682] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> > IRQ 22 > <4>[ 0.976746] ahci 0000:00:12.0: ASUS M2A-VM: enabling 64bit DMA > <6>[ 0.976894] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 > Gbps 0xf impl SATA mode > <6>[ 0.976948] ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led > clo pmp pio slum part ccc > <6>[ 0.978388] scsi0 : ahci > <6>[ 0.978657] scsi1 : ahci > <6>[ 0.978850] scsi2 : ahci > <6>[ 0.979043] scsi3 : ahci > <6>[ 0.979251] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port > 0xfe02f100 irq 22 > <6>[ 0.979311] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port > 0xfe02f180 irq 22 > <6>[ 0.979371] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port > 0xfe02f200 irq 22 > <6>[ 0.979430] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port > 0xfe02f280 irq 22 > <6>[ 0.979764] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > <6>[ 0.979841] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) > -> IRQ 19 > <7>[ 0.979922] r8169 0000:02:00.0: setting latency timer to 64 > <7>[ 0.979974] r8169 0000:02:00.0: irq 41 for MSI/MSI-X > <6>[ 0.980235] r8169 0000:02:00.0: eth0: RTL8168b/8111b at > 0xffffc9000000c000, 00:1b:fc:89:fa:a2, XID 18000000 IRQ 41 > <6>[ 0.980386] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > <6>[ 0.980467] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, > low) -> IRQ 19 > <6>[ 0.980535] ehci_hcd 0000:00:13.5: EHCI Host Controller > <6>[ 0.980580] ehci_hcd 0000:00:13.5: new USB bus registered, > assigned bus number 1 > <6>[ 0.980660] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB > freeze workaround > <6>[ 0.980729] ehci_hcd 0000:00:13.5: debug port 1 > <6>[ 0.980795] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000 > <6>[ 0.986023] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 > <6>[ 0.986250] hub 1-0:1.0: USB hub found > <6>[ 0.986283] hub 1-0:1.0: 10 ports detected > <6>[ 0.986444] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > <6>[ 0.986509] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, > low) -> IRQ 16 > <6>[ 0.986569] ohci_hcd 0000:00:13.0: OHCI Host Controller > <6>[ 0.986610] ohci_hcd 0000:00:13.0: new USB bus registered, > assigned bus number 2 > <6>[ 0.986695] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000 > <6>[ 1.041189] hub 2-0:1.0: USB hub found > <6>[ 1.041222] hub 2-0:1.0: 2 ports detected > <6>[ 1.041307] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, > low) -> IRQ 17 > <6>[ 1.041366] ohci_hcd 0000:00:13.1: OHCI Host Controller > <6>[ 1.041408] ohci_hcd 0000:00:13.1: new USB bus registered, > assigned bus number 3 > <6>[ 1.043218] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000 > <6>[ 1.099184] hub 3-0:1.0: USB hub found > <6>[ 1.100980] hub 3-0:1.0: 2 ports detected > <6>[ 1.102820] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, > low) -> IRQ 18 > <6>[ 1.104652] ohci_hcd 0000:00:13.2: OHCI Host Controller > <6>[ 1.106404] ohci_hcd 0000:00:13.2: new USB bus registered, > assigned bus number 4 > <6>[ 1.108236] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000 > <6>[ 1.165198] hub 4-0:1.0: USB hub found > <6>[ 1.167032] hub 4-0:1.0: 2 ports detected > <6>[ 1.168884] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, > low) -> IRQ 17 > <6>[ 1.170721] ohci_hcd 0000:00:13.3: OHCI Host Controller > <6>[ 1.172563] ohci_hcd 0000:00:13.3: new USB bus registered, > assigned bus number 5 > <6>[ 1.174331] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000 > <6>[ 1.231189] hub 5-0:1.0: USB hub found > <6>[ 1.232980] hub 5-0:1.0: 2 ports detected > <6>[ 1.234800] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, > low) -> IRQ 18 > <6>[ 1.236628] ohci_hcd 0000:00:13.4: OHCI Host Controller > <6>[ 1.238457] ohci_hcd 0000:00:13.4: new USB bus registered, > assigned bus number 6 > <6>[ 1.240300] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000 > <6>[ 1.297187] hub 6-0:1.0: USB hub found > <6>[ 1.298966] hub 6-0:1.0: 2 ports detected > <6>[ 1.301069] i8042: PNP: No PS/2 controller found. Probing ports > directly. > <6>[ 1.303316] serio: i8042 KBD port at 0x60,0x64 irq 1 > <6>[ 1.305153] serio: i8042 AUX port at 0x60,0x64 irq 12 > <6>[ 1.307032] mousedev: PS/2 mouse device common for all mice > <4>[ 1.309117] k8temp 0000:00:18.3: Temperature readouts might be > wrong - check erratum #141 > <6>[ 1.310999] md: linear personality registered for level -1 > <6>[ 1.312854] device-mapper: uevent: version 1.0.3 > <6>[ 1.314739] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) > initialised: dm-devel@xxxxxxxxxx > <6>[ 1.316569] Bluetooth: Generic Bluetooth USB driver ver 0.6 > <6>[ 1.318439] usbcore: registered new interface driver btusb > <6>[ 1.320251] cpuidle: using governor ladder > <6>[ 1.322080] cpuidle: using governor menu > <6>[ 1.324308] ALSA device list: > <6>[ 1.326177] No soundcards found. > <6>[ 1.327923] TCP cubic registered > <6>[ 1.329757] NET: Registered protocol family 17 > <6>[ 1.331657] Bluetooth: RFCOMM TTY layer initialized > <6>[ 1.333581] Bluetooth: RFCOMM socket layer initialized > <6>[ 1.335458] Bluetooth: RFCOMM ver 1.11 > <6>[ 1.337296] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > <6>[ 1.339102] Bluetooth: BNEP filters: protocol multicast > <6>[ 1.340805] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 > <3>[ 1.439021] ata2: softreset failed (device not ready) > <4>[ 1.440767] ata2: applying SB600 PMP SRST workaround and retrying > <3>[ 1.442560] ata4: softreset failed (device not ready) > <4>[ 1.444252] ata4: applying SB600 PMP SRST workaround and retrying > <3>[ 1.446052] ata1: softreset failed (device not ready) > <4>[ 1.447873] ata1: applying SB600 PMP SRST workaround and retrying > <3>[ 1.449704] ata3: softreset failed (device not ready) > <4>[ 1.451614] ata3: applying SB600 PMP SRST workaround and retrying > <6>[ 1.570017] usb 3-2: new full speed USB device number 2 using ohci_hcd > <6>[ 1.606033] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > <6>[ 1.607842] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > <6>[ 1.609683] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > <6>[ 1.611455] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > <6>[ 1.613286] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB00, max > UDMA/100 > <6>[ 1.615096] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 1.617016] ata2.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max > UDMA/133 > <6>[ 1.618805] ata2.00: 2930277168 sectors, multi 1: LBA48 NCQ (depth > 31/32), AA > <6>[ 1.620598] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 1.622392] ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 > <6>[ 1.624159] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth > 31/32), AA > <6>[ 1.625979] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 1.628308] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 1.630140] ata4.00: configured for UDMA/100 > <6>[ 1.632082] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 1.633901] ata1.00: configured for UDMA/133 > <6>[ 1.635707] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 1.637549] ata2.00: configured for UDMA/133 > <6>[ 1.644223] ata3.00: ATA-8: WDC WD3200BEVT-00ZCT0, 11.01A11, max > UDMA/133 > <6>[ 1.646082] ata3.00: 625142448 sectors, multi 1: LBA48 NCQ (depth > 31/32), AA > <5>[ 1.646224] scsi 0:0:0:0: Direct-Access ATA SAMSUNG > HD501LJ CR10 PQ: 0 ANSI: 5 > <6>[ 1.649806] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd > <5>[ 1.651903] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: > (500 GB/465 GiB) > <6>[ 1.652618] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 1.652620] ata3.00: configured for UDMA/133 > <5>[ 1.657496] sd 0:0:0:0: [sda] Write Protect is off > <5>[ 1.657524] scsi 1:0:0:0: Direct-Access ATA WDC > WD15EADS-00P 01.0 PQ: 0 ANSI: 5 > <7>[ 1.661219] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > <5>[ 1.661238] sd 0:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > <5>[ 1.661388] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: > (1.50 TB/1.36 TiB) > <5>[ 1.661419] sd 1:0:0:0: [sdb] Write Protect is off > <7>[ 1.661422] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > <5>[ 1.661436] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > <5>[ 1.669349] scsi 2:0:0:0: Direct-Access ATA WDC > WD3200BEVT-0 11.0 PQ: 0 ANSI: 5 > <5>[ 1.671527] sd 2:0:0:0: [sdc] 625142448 512-byte logical blocks: > (320 GB/298 GiB) > <5>[ 1.673606] sd 2:0:0:0: [sdc] Write Protect is off > <5>[ 1.673828] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW > SH-S203P SB00 PQ: 0 ANSI: 5 > <4>[ 1.676196] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw > xa/form2 cdda tray > <6>[ 1.676198] cdrom: Uniform CD-ROM driver Revision: 3.20 > <7>[ 1.676313] sr 3:0:0:0: Attached scsi CD-ROM sr0 > <6>[ 1.679780] sda: sda1 sda2 sda3 sda4 > <6>[ 1.683344] sdb: sdb1 sdb2 sdb3 sdb4 > <5>[ 1.683535] sd 0:0:0:0: [sda] Attached SCSI disk > <7>[ 1.683545] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 > <5>[ 1.683561] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > <5>[ 1.689674] sd 1:0:0:0: [sdb] Attached SCSI disk > <6>[ 1.748675] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 > > <5>[ 1.751473] sd 2:0:0:0: [sdc] Attached SCSI disk > <3>[ 1.753929] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) > <6>[ 1.756034] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core > Processor 5600+ (2 cpu cores) (version 2.20.00) > <6>[ 1.758126] powernow-k8: fid 0x14 (2800 MHz), vid 0x8 > <6>[ 1.760103] powernow-k8: fid 0x12 (2600 MHz), vid 0xa > <6>[ 1.762173] powernow-k8: fid 0x10 (2400 MHz), vid 0xc > <6>[ 1.764224] powernow-k8: fid 0xe (2200 MHz), vid 0xe > <6>[ 1.766280] powernow-k8: fid 0xc (2000 MHz), vid 0x10 > <6>[ 1.768317] powernow-k8: fid 0xa (1800 MHz), vid 0x10 > <6>[ 1.770357] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 > <6>[ 1.772504] md: Skipping autodetection of RAID arrays. > (raid=autodetect will force) > <6>[ 1.794375] EXT3-fs (sda3): recovery required on readonly filesystem > <6>[ 1.796428] EXT3-fs (sda3): write access will be enabled during > recovery > <6>[ 1.805899] EXT3-fs: barriers not enabled > <6>[ 1.824514] kjournald starting. Commit interval 5 seconds > <6>[ 1.824595] EXT3-fs (sda3): recovery complete > <6>[ 1.835108] EXT3-fs (sda3): mounted filesystem with writeback data > mode > <6>[ 1.840311] VFS: Mounted root (ext3 filesystem) readonly on device > 8:3. > <6>[ 1.845604] Freeing unused kernel memory: 464k freed > <6>[ 1.868037] usb 5-1: new low speed USB device number 2 using ohci_hcd > <6>[ 6.958459] udev[1059]: starting version 164 > <6>[ 7.174260] atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev > 0x00) > <6>[ 7.174277] ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, > low) -> IRQ 16 > <6>[ 7.174295] atiixp 0000:00:14.1: not 100% native mode: will probe > irqs later > <6>[ 7.174303] ide0: BM-DMA at 0xf900-0xf907 > <7>[ 7.174310] Probing IDE interface ide0... > <6>[ 7.323529] input: PC Speaker as /devices/platform/pcspkr/input/input2 > <6>[ 7.427754] rtc_cmos 00:03: RTC can wake from S4 > <6>[ 7.427992] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 > <6>[ 7.428080] rtc0: alarms up to one month, 242 bytes nvram > <6>[ 7.462953] Linux video capture interface: v2.00 > <5>[ 7.540836] sd 0:0:0:0: Attached scsi generic sg0 type 0 > <5>[ 7.540922] sd 1:0:0:0: Attached scsi generic sg1 type 0 > <5>[ 7.541000] sd 2:0:0:0: Attached scsi generic sg2 type 0 > <5>[ 7.541097] sr 3:0:0:0: Attached scsi generic sg3 type 5 > <6>[ 7.687199] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > <6>[ 7.687388] piix4_smbus 0000:00:14.0: SMBus Host Controller at > 0xb00, revision 0 > <6>[ 7.764840] input: iMON Panel, Knob and Mouse(15c2:ffdc) as > /devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1:1.0/input/input3 > <6>[ 7.772293] IR NEC protocol handler initialized > <6>[ 7.785025] imon 5-1:1.0: 0xffdc iMON VFD, MCE IR (id 0x9e) > <6>[ 7.843023] Registered IR keymap rc-imon-mce > <6>[ 7.843293] input: iMON Remote (15c2:ffdc) as > /devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1:1.0/rc/rc0/input4 > <6>[ 7.843388] rc0: iMON Remote (15c2:ffdc) as > /devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1:1.0/rc/rc0 > <6>[ 7.857208] imon 5-1:1.0: iMON device (15c2:ffdc, intf0) on > usb<5:2> initialized > <6>[ 7.857254] usbcore: registered new interface driver imon > <6>[ 7.911900] saa7130/34: v4l2 driver version 0.2.16 loaded > <6>[ 7.912064] saa7134 0000:03:06.0: PCI INT A -> GSI 21 (level, low) > -> IRQ 21 > <6>[ 7.912078] saa7133[0]: found at 0000:03:06.0, rev: 209, irq: 21, > latency: 64, mmio: 0xfdeff000 > <6>[ 7.912094] saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV > 310i [card=101,autodetected] > <6>[ 7.912145] saa7133[0]: board init: gpio is 600e000 > <6>[ 7.931260] IT8716 SuperIO detected. > <6>[ 7.932094] parport_pc 00:09: reported by Plug and Play ACPI > <6>[ 7.932134] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] > <4>[ 8.015378] saa7133[0]: i2c eeprom read error (err=-5) > <6>[ 8.129842] IR RC5(x) protocol handler initialized > <6>[ 8.180277] IR RC6 protocol handler initialized > <4>[ 8.180688] i2c-core: driver [tuner] using legacy suspend method > <4>[ 8.180697] i2c-core: driver [tuner] using legacy resume method > <6>[ 8.302205] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, > low) -> IRQ 16 > <6>[ 8.454573] IR JVC protocol handler initialized > <6>[ 8.486162] HDA Intel 0000:01:05.2: PCI INT B -> GSI 19 (level, > low) -> IRQ 19 > <7>[ 8.486241] HDA Intel 0000:01:05.2: irq 42 for MSI/MSI-X > <6>[ 8.490533] IR Sony protocol handler initialized > <6>[ 8.514675] lirc_dev: IR Remote Control driver registered, major 252 > <6>[ 8.523937] IR LIRC bridge handler initialized > <6>[ 8.551033] tuner 5-004b: Tuner -1 found with type(s) Radio TV. > <6>[ 8.586028] tda829x 5-004b: setting tuner address to 61 > <6>[ 8.627490] tda829x 5-004b: ANDERS: setting switch_addr. was 0x00, > new 0x4b > <6>[ 8.627499] tda829x 5-004b: ANDERS: new 0x61 > <6>[ 8.633026] tda829x 5-004b: type set to tda8290+75a > <4>[ 11.493010] hda-intel: azx_get_response timeout, switching to > polling mode: last cmd=0x000f0000 > <6>[ 11.623087] saa7133[0]: registered device video0 [v4l2] > <6>[ 11.623130] saa7133[0]: registered device vbi0 > <6>[ 11.623168] saa7133[0]: registered device radio0 > <6>[ 11.644660] dvb_init() allocating 1 frontend > <6>[ 11.690027] DVB: registering new adapter (saa7133[0]) > <4>[ 11.690032] DVB: registering adapter 0 frontend 0 (Philips > TDA10046H DVB-T)... > <6>[ 11.756020] tda1004x: setting up plls for 48MHz sampling clock > <4>[ 12.494013] hda-intel: No response from codec, disabling MSI: last > cmd=0x000f0000 > <4>[ 13.495013] hda-intel: Codec #0 probe error; disabling it... > <3>[ 13.909022] tda1004x: timeout waiting for DSP ready > <6>[ 13.919019] tda1004x: found firmware revision 0 -- invalid > <6>[ 13.919022] tda1004x: trying to boot from eeprom > <3>[ 15.606012] hda_intel: azx_get_response timeout, switching to > single_cmd mode: last cmd=0x00070503 > <3>[ 15.607796] hda-codec: No codec parser is available > <6>[ 15.877023] tda1004x: found firmware revision 0 -- invalid > <6>[ 15.877031] tda1004x: waiting for firmware upload... > <3>[ 15.953447] tda1004x: no firmware upload (timeout or file not found?) > <4>[ 15.953453] tda1004x: firmware upload failed > <6>[ 16.078174] saa7134 ALSA driver for DMA sound loaded > <6>[ 16.078229] saa7133[0]/alsa: saa7133[0] at 0xfdeff000 irq 21 > registered as card -1 > <6>[ 41.755581] EXT3-fs (sda3): using internal journal > <6>[ 41.937882] EXT3-fs: barriers not enabled > <6>[ 41.940227] kjournald starting. Commit interval 5 seconds > <6>[ 41.940590] EXT3-fs (sda1): using internal journal > <6>[ 41.940602] EXT3-fs (sda1): mounted filesystem with writeback data > mode > <6>[ 41.962540] EXT3-fs: barriers not enabled > <6>[ 41.975332] kjournald starting. Commit interval 5 seconds > <6>[ 41.975652] EXT3-fs (dm-1): using internal journal > <6>[ 41.975660] EXT3-fs (dm-1): mounted filesystem with writeback data > mode > <6>[ 42.063644] EXT3-fs: barriers not enabled > <6>[ 42.072233] kjournald starting. Commit interval 5 seconds > <6>[ 42.072551] EXT3-fs (dm-2): using internal journal > <6>[ 42.072560] EXT3-fs (dm-2): mounted filesystem with writeback data > mode > <6>[ 42.085164] EXT3-fs: barriers not enabled > <6>[ 42.096892] kjournald starting. Commit interval 5 seconds > <6>[ 42.097760] EXT3-fs (dm-3): using internal journal > <6>[ 42.097770] EXT3-fs (dm-3): mounted filesystem with writeback data > mode > <6>[ 42.169929] EXT4-fs (dm-4): mounted filesystem with ordered data > mode. Opts: (null) > <6>[ 42.328528] EXT4-fs (dm-7): mounted filesystem with ordered data > mode. Opts: (null) > <6>[ 42.373537] EXT3-fs: barriers not enabled > <6>[ 42.384316] kjournald starting. Commit interval 5 seconds > <6>[ 42.384600] EXT3-fs (dm-5): using internal journal > <6>[ 42.384609] EXT3-fs (dm-5): mounted filesystem with writeback data > mode > <6>[ 42.445883] EXT4-fs (dm-6): mounted filesystem with ordered data > mode. Opts: (null) > <6>[ 42.502352] EXT4-fs (dm-0): mounted filesystem without journal. > Opts: (null) > <6>[ 45.270924] Adding 10490440k swap on /dev/sda2. Priority:-1 > extents:1 across:10490440k > <6>[ 45.769865] r8169 0000:02:00.0: eth0: link down > <6>[ 47.667834] r8169 0000:02:00.0: eth0: link up > <6>[ 203.678895] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 203.680952] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 203.680962] ata1.00: configured for UDMA/133 > <6>[ 203.680970] ata1: EH complete > <6>[ 203.913278] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 203.917159] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 203.917168] ata2.00: configured for UDMA/133 > <6>[ 203.917175] ata2: EH complete > <6>[ 204.328701] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 204.329712] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 204.329719] ata3.00: configured for UDMA/133 > <6>[ 204.329727] ata3: EH complete > <6>[ 204.523207] EXT4-fs (dm-4): re-mounted. Opts: commit=0 > <6>[ 204.530096] EXT4-fs (dm-7): re-mounted. Opts: commit=0 > <6>[ 204.545240] EXT4-fs (dm-6): re-mounted. Opts: commit=0 > <6>[ 204.552795] EXT4-fs (dm-0): re-mounted. Opts: commit=0 > <6>[ 205.178334] PM: Syncing filesystems ... done. > <4>[ 205.258426] Freezing user space processes ... (elapsed 0.01 > seconds) done. > <4>[ 205.269022] Freezing remaining freezable tasks ... (elapsed 0.01 > seconds) done. > <4>[ 205.280037] Suspending console(s) (use no_console_suspend to debug) > <5>[ 205.280470] sd 2:0:0:0: [sdc] Synchronizing SCSI cache > <5>[ 205.280510] sd 1:0:0:0: [sdb] Synchronizing SCSI cache > <5>[ 205.280590] sd 0:0:0:0: [sda] Synchronizing SCSI cache > <5>[ 205.280656] sd 1:0:0:0: [sdb] Stopping disk > <5>[ 205.280661] sd 2:0:0:0: [sdc] Stopping disk > <6>[ 205.280816] parport_pc 00:09: disabled > <6>[ 205.280883] serial 00:08: disabled > <6>[ 205.280909] serial 00:08: wake-up capability disabled by ACPI > <7>[ 205.281312] ACPI handle has no context! > <6>[ 205.281480] r8169 0000:02:00.0: eth0: link down > <6>[ 205.283177] ATIIXP_IDE 0000:00:14.1: PCI INT A disabled > <6>[ 205.283212] ehci_hcd 0000:00:13.5: PCI INT D disabled > <6>[ 205.283223] ohci_hcd 0000:00:13.4: PCI INT C disabled > <6>[ 205.283254] ohci_hcd 0000:00:13.2: PCI INT C disabled > <6>[ 205.283283] ohci_hcd 0000:00:13.0: PCI INT A disabled > <6>[ 205.291041] ohci_hcd 0000:00:13.3: PCI INT B disabled > <6>[ 205.293036] ohci_hcd 0000:00:13.1: PCI INT B disabled > <5>[ 205.309953] sd 0:0:0:0: [sda] Stopping disk > <6>[ 205.316796] radeon 0000:01:05.0: PCI INT A disabled > <6>[ 205.382024] HDA Intel 0000:01:05.2: PCI INT B disabled > <7>[ 205.382034] ACPI handle has no context! > <6>[ 205.384100] HDA Intel 0000:00:14.2: PCI INT A disabled > <6>[ 205.974363] ahci 0000:00:12.0: PCI INT A disabled > <6>[ 205.974389] PM: suspend of devices complete after 694.074 msecs > <7>[ 205.974615] r8169 0000:02:00.0: PME# enabled > <6>[ 205.974624] pcieport 0000:00:07.0: wake-up capability enabled by ACPI > <6>[ 205.996148] PM: late suspend of devices complete after 21.754 msecs > <6>[ 205.996347] ACPI: Preparing to enter system sleep state S3 > <6>[ 205.996427] PM: Saving platform NVS memory > <4>[ 205.996457] Disabling non-boot CPUs ... > <6>[ 205.997834] CPU 1 is now offline > <6>[ 205.998251] ACPI: Low-level resume complete > <6>[ 205.998251] PM: Restoring platform NVS memory > <6>[ 205.998251] Enabling non-boot CPUs ... > <6>[ 206.000486] Booting Node 0 Processor 1 APIC 0x1 > <7>[ 206.000488] smpboot cpu 1: start_ip = 9a000 > <6>[ 206.071328] CPU1 is up > <6>[ 206.071556] ACPI: Waking up from system sleep state S3 > <7>[ 206.071680] pci 0000:00:00.0: restoring config space at offset 0x3 > (was 0x0, writing 0x4000) > <7>[ 206.071703] pcieport 0000:00:07.0: restoring config space at > offset 0x1 (was 0x100007, writing 0x100407) > <7>[ 206.071738] ahci 0000:00:12.0: restoring config space at offset > 0x2 (was 0x1018f00, writing 0x1060100) > <6>[ 206.071755] ahci 0000:00:12.0: set SATA to AHCI mode > <7>[ 206.071777] ohci_hcd 0000:00:13.0: restoring config space at > offset 0x1 (was 0x2a00007, writing 0x2a00003) > <7>[ 206.071803] ohci_hcd 0000:00:13.1: restoring config space at > offset 0x1 (was 0x2a00007, writing 0x2a00003) > <7>[ 206.071829] ohci_hcd 0000:00:13.2: restoring config space at > offset 0x1 (was 0x2a00007, writing 0x2a00003) > <7>[ 206.071855] ohci_hcd 0000:00:13.3: restoring config space at > offset 0x1 (was 0x2a00007, writing 0x2a00003) > <7>[ 206.071881] ohci_hcd 0000:00:13.4: restoring config space at > offset 0x1 (was 0x2a00007, writing 0x2a00003) > <7>[ 206.071913] ehci_hcd 0000:00:13.5: restoring config space at > offset 0x1 (was 0x2b00000, writing 0x2b00013) > <7>[ 206.072021] HDA Intel 0000:00:14.2: restoring config space at > offset 0x1 (was 0x4100006, writing 0x4100002) > <6>[ 206.072027] Switched to NOHz mode on CPU #1 > <7>[ 206.072103] HDA Intel 0000:01:05.2: restoring config space at > offset 0xf (was 0x200, writing 0x20a) > <7>[ 206.072109] HDA Intel 0000:01:05.2: restoring config space at > offset 0x4 (was 0x4, writing 0xfdbfc004) > <7>[ 206.072112] HDA Intel 0000:01:05.2: restoring config space at > offset 0x3 (was 0x0, writing 0x4008) > <7>[ 206.072115] HDA Intel 0000:01:05.2: restoring config space at > offset 0x1 (was 0x100000, writing 0x100002) > <7>[ 206.072138] r8169 0000:02:00.0: restoring config space at offset > 0xf (was 0x100, writing 0x10a) > <7>[ 206.072152] r8169 0000:02:00.0: restoring config space at offset > 0x6 (was 0x4, writing 0xfdfff004) > <7>[ 206.072157] r8169 0000:02:00.0: restoring config space at offset > 0x4 (was 0x1, writing 0xee01) > <7>[ 206.072162] r8169 0000:02:00.0: restoring config space at offset > 0x3 (was 0x0, writing 0x8) > <7>[ 206.072168] r8169 0000:02:00.0: restoring config space at offset > 0x1 (was 0x100000, writing 0x100407) > <7>[ 206.072209] saa7134 0000:03:06.0: restoring config space at offset > 0xf (was 0x2054017b, writing 0x205401ff) > <7>[ 206.072230] saa7134 0000:03:06.0: restoring config space at offset > 0x4 (was 0x0, writing 0xfdeff000) > <7>[ 206.072235] saa7134 0000:03:06.0: restoring config space at offset > 0x3 (was 0xcd00, writing 0x4000) > <7>[ 206.072242] saa7134 0000:03:06.0: restoring config space at offset > 0x1 (was 0x2900000, writing 0x2900006) > <7>[ 206.072264] pci 0000:03:07.0: restoring config space at offset 0xf > (was 0x200001ff, writing 0x2000010b) > <7>[ 206.072284] pci 0000:03:07.0: restoring config space at offset 0x5 > (was 0x1, writing 0xcf01) > <7>[ 206.072290] pci 0000:03:07.0: restoring config space at offset 0x4 > (was 0xfdeff000, writing 0xfdefe000) > <7>[ 206.072295] pci 0000:03:07.0: restoring config space at offset 0x3 > (was 0x4000, writing 0x4008) > <7>[ 206.072302] pci 0000:03:07.0: restoring config space at offset 0x1 > (was 0x2100006, writing 0x2100007) > <6>[ 206.072442] PM: early resume of devices complete after 0.787 msecs > <6>[ 206.072599] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> > IRQ 22 > <6>[ 206.072670] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) > -> IRQ 18 > <6>[ 206.072730] HDA Intel 0000:01:05.2: PCI INT B -> GSI 19 (level, > low) -> IRQ 19 > <6>[ 206.072794] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, > low) -> IRQ 16 > <6>[ 206.072847] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, > low) -> IRQ 17 > <6>[ 206.072851] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, > low) -> IRQ 18 > <6>[ 206.072870] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, > low) -> IRQ 17 > <6>[ 206.072883] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, > low) -> IRQ 18 > <6>[ 206.072897] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, > low) -> IRQ 19 > <6>[ 206.072934] saa7133[0]: board init: gpio is 600e000 > <6>[ 206.072951] pcieport 0000:00:07.0: wake-up capability disabled by ACPI > <7>[ 206.072956] r8169 0000:02:00.0: PME# disabled > <5>[ 206.073028] sd 0:0:0:0: [sda] Starting disk > <5>[ 206.073067] sd 1:0:0:0: [sdb] Starting disk > <5>[ 206.073097] sd 2:0:0:0: [sdc] Starting disk > <6>[ 206.074033] ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, > low) -> IRQ 16 > <6>[ 206.074046] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, > low) -> IRQ 16 > <6>[ 206.074469] serial 00:08: activated > <6>[ 206.074772] parport_pc 00:09: activated > <6>[ 206.079074] r8169 0000:02:00.0: eth0: link down > <6>[ 206.160028] [drm] radeon: 1 quad pipes, 1 z pipes initialized. > <6>[ 206.166059] radeon 0000:01:05.0: WB enabled > <6>[ 206.166072] [drm] radeon: ring at 0x0000000080001000 > <6>[ 206.166092] [drm] ring test succeeded in 1 usecs > <6>[ 206.166102] [drm] ib test succeeded in 0 usecs > <6>[ 206.316024] usb 3-2: reset full speed USB device number 2 using > ohci_hcd > <4>[ 206.469919] btusb 3-2:1.0: no reset_resume for driver btusb? > <4>[ 206.469921] btusb 3-2:1.1: no reset_resume for driver btusb? > <3>[ 206.532015] ata4: softreset failed (device not ready) > <4>[ 206.532018] ata4: applying SB600 PMP SRST workaround and retrying > <6>[ 206.687032] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > <6>[ 206.688553] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 206.731100] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 206.731103] ata4.00: configured for UDMA/100 > <6>[ 207.783243] r8169 0000:02:00.0: eth0: link up > <3>[ 209.184023] ata3: softreset failed (device not ready) > <4>[ 209.184026] ata3: applying SB600 PMP SRST workaround and retrying > <6>[ 209.339024] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > <6>[ 209.369662] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 209.370622] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 209.370624] ata3.00: configured for UDMA/133 > <3>[ 213.774015] ata1: softreset failed (device not ready) > <4>[ 213.774017] ata1: applying SB600 PMP SRST workaround and retrying > <6>[ 213.929032] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > <6>[ 213.931017] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 213.933047] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 213.933050] ata1.00: configured for UDMA/133 > <3>[ 214.642028] ata2: softreset failed (device not ready) > <4>[ 214.642030] ata2: applying SB600 PMP SRST workaround and retrying > <6>[ 214.797027] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > <6>[ 216.505430] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 216.508803] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 216.508805] ata2.00: configured for UDMA/133 > <6>[ 217.503047] PM: resume of devices complete after 11430.526 msecs > <4>[ 217.503413] Restarting tasks ... done. > <6>[ 217.806383] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 217.808438] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 217.808445] ata1.00: configured for UDMA/133 > <6>[ 217.808452] ata1: EH complete > <6>[ 218.091813] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 218.095202] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 218.095211] ata2.00: configured for UDMA/133 > <6>[ 218.095218] ata2: EH complete > <6>[ 218.512110] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 218.513141] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[ 218.513158] ata3.00: configured for UDMA/133 > <6>[ 218.513177] ata3: EH complete > <6>[ 218.605404] EXT4-fs (dm-4): re-mounted. Opts: commit=0 > <6>[ 218.612182] EXT4-fs (dm-7): re-mounted. Opts: commit=0 > <6>[ 218.627577] EXT4-fs (dm-6): re-mounted. Opts: commit=0 > <6>[ 218.634463] EXT4-fs (dm-0): re-mounted. Opts: commit=0 > <6>[13990.570974] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[13990.573451] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[13990.573460] ata1.00: configured for UDMA/133 > <6>[13990.573468] ata1: EH complete > <6>[13990.819528] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[13990.823928] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[13990.823936] ata2.00: configured for UDMA/133 > <6>[13990.823943] ata2: EH complete > <6>[13990.886678] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[13990.887693] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[13990.887701] ata3.00: configured for UDMA/133 > <6>[13990.887708] ata3: EH complete > <6>[13991.140951] EXT4-fs (dm-4): re-mounted. Opts: commit=0 > <6>[13991.148423] EXT4-fs (dm-7): re-mounted. Opts: commit=0 > <6>[13991.161902] EXT4-fs (dm-6): re-mounted. Opts: commit=0 > <6>[13991.169068] EXT4-fs (dm-0): re-mounted. Opts: commit=0 > <6>[13991.650833] PM: Syncing filesystems ... done. > <4>[13991.788480] Freezing user space processes ... > <3>[13991.793014] imon:send_packet: task interrupted > <3>[13991.798014] imon:send_packet: task interrupted > <4>[13991.810018] (elapsed 0.02 seconds) done. > <4>[13991.810020] Freezing remaining freezable tasks ... (elapsed 0.01 > seconds) done. > <4>[13991.821034] Suspending console(s) (use no_console_suspend to debug) > <5>[13991.852176] sd 2:0:0:0: [sdc] Synchronizing SCSI cache > <5>[13991.852229] sd 1:0:0:0: [sdb] Synchronizing SCSI cache > <5>[13991.852272] sd 0:0:0:0: [sda] Synchronizing SCSI cache > <5>[13991.852353] sd 2:0:0:0: [sdc] Stopping disk > <5>[13991.852358] sd 1:0:0:0: [sdb] Stopping disk > <6>[13991.852409] parport_pc 00:09: disabled > <6>[13991.852487] serial 00:08: disabled > <6>[13991.852511] serial 00:08: wake-up capability disabled by ACPI > <7>[13991.852615] ACPI handle has no context! > <6>[13991.852672] HDA Intel 0000:01:05.2: PCI INT B disabled > <7>[13991.852683] ACPI handle has no context! > <6>[13991.853072] r8169 0000:02:00.0: eth0: link down > <6>[13991.854632] ATIIXP_IDE 0000:00:14.1: PCI INT A disabled > <6>[13991.854665] ehci_hcd 0000:00:13.5: PCI INT D disabled > <6>[13991.854675] ohci_hcd 0000:00:13.4: PCI INT C disabled > <6>[13991.854698] ohci_hcd 0000:00:13.2: PCI INT C disabled > <6>[13991.854723] ohci_hcd 0000:00:13.0: PCI INT A disabled > <6>[13991.863051] ohci_hcd 0000:00:13.3: PCI INT B disabled > <6>[13991.865036] ohci_hcd 0000:00:13.1: PCI INT B disabled > <5>[13991.868645] sd 0:0:0:0: [sda] Stopping disk > <6>[13991.883330] radeon 0000:01:05.0: PCI INT A disabled > <6>[13991.955068] HDA Intel 0000:00:14.2: PCI INT A disabled > <6>[13992.544689] ahci 0000:00:12.0: PCI INT A disabled > <6>[13992.544709] PM: suspend of devices complete after 723.386 msecs > <7>[13992.544965] r8169 0000:02:00.0: PME# enabled > <6>[13992.544974] pcieport 0000:00:07.0: wake-up capability enabled by ACPI > <6>[13992.566165] PM: late suspend of devices complete after 21.451 msecs > <6>[13992.566445] ACPI: Preparing to enter system sleep state S3 > <6>[13992.566524] PM: Saving platform NVS memory > <4>[13992.566554] Disabling non-boot CPUs ... > <6>[13992.567938] CPU 1 is now offline > <6>[13992.568322] ACPI: Low-level resume complete > <6>[13992.568322] PM: Restoring platform NVS memory > <6>[13992.568322] Enabling non-boot CPUs ... > <6>[13992.570562] Booting Node 0 Processor 1 APIC 0x1 > <7>[13992.570563] smpboot cpu 1: start_ip = 9a000 > <6>[13992.641269] CPU1 is up > <6>[13992.641492] ACPI: Waking up from system sleep state S3 > <7>[13992.641597] pci 0000:00:00.0: restoring config space at offset 0x3 > (was 0x0, writing 0x4000) > <7>[13992.641621] pcieport 0000:00:07.0: restoring config space at > offset 0x1 (was 0x100007, writing 0x100407) > <7>[13992.641655] ahci 0000:00:12.0: restoring config space at offset > 0x2 (was 0x1018f00, writing 0x1060100) > <6>[13992.641673] ahci 0000:00:12.0: set SATA to AHCI mode > <7>[13992.641695] ohci_hcd 0000:00:13.0: restoring config space at > offset 0x1 (was 0x2a00007, writing 0x2a00003) > <7>[13992.641721] ohci_hcd 0000:00:13.1: restoring config space at > offset 0x1 (was 0x2a00007, writing 0x2a00003) > <7>[13992.641746] ohci_hcd 0000:00:13.2: restoring config space at > offset 0x1 (was 0x2a00007, writing 0x2a00003) > <7>[13992.641771] ohci_hcd 0000:00:13.3: restoring config space at > offset 0x1 (was 0x2a00007, writing 0x2a00003) > <7>[13992.641797] ohci_hcd 0000:00:13.4: restoring config space at > offset 0x1 (was 0x2a00007, writing 0x2a00003) > <7>[13992.641829] ehci_hcd 0000:00:13.5: restoring config space at > offset 0x1 (was 0x2b00000, writing 0x2b00013) > <7>[13992.641913] HDA Intel 0000:00:14.2: restoring config space at > offset 0x1 (was 0x4100006, writing 0x4100002) > <7>[13992.641993] HDA Intel 0000:01:05.2: restoring config space at > offset 0xf (was 0x200, writing 0x20a) > <7>[13992.641999] HDA Intel 0000:01:05.2: restoring config space at > offset 0x4 (was 0x4, writing 0xfdbfc004) > <6>[13992.642028] Switched to NOHz mode on CPU #1 > <7>[13992.642032] HDA Intel 0000:01:05.2: restoring config space at > offset 0x3 (was 0x0, writing 0x4008) > <7>[13992.642035] HDA Intel 0000:01:05.2: restoring config space at > offset 0x1 (was 0x100000, writing 0x100002) > <7>[13992.642058] r8169 0000:02:00.0: restoring config space at offset > 0xf (was 0x100, writing 0x10a) > <7>[13992.642072] r8169 0000:02:00.0: restoring config space at offset > 0x6 (was 0x4, writing 0xfdfff004) > <7>[13992.642078] r8169 0000:02:00.0: restoring config space at offset > 0x4 (was 0x1, writing 0xee01) > <7>[13992.642082] r8169 0000:02:00.0: restoring config space at offset > 0x3 (was 0x0, writing 0x8) > <7>[13992.642088] r8169 0000:02:00.0: restoring config space at offset > 0x1 (was 0x100000, writing 0x100407) > <7>[13992.642130] saa7134 0000:03:06.0: restoring config space at offset > 0xf (was 0x2054017b, writing 0x205401ff) > <7>[13992.642151] saa7134 0000:03:06.0: restoring config space at offset > 0x4 (was 0x0, writing 0xfdeff000) > <7>[13992.642156] saa7134 0000:03:06.0: restoring config space at offset > 0x3 (was 0xcd00, writing 0x4000) > <7>[13992.642163] saa7134 0000:03:06.0: restoring config space at offset > 0x1 (was 0x2900000, writing 0x2900006) > <7>[13992.642185] pci 0000:03:07.0: restoring config space at offset 0xf > (was 0x200001ff, writing 0x2000010b) > <7>[13992.642205] pci 0000:03:07.0: restoring config space at offset 0x5 > (was 0x1, writing 0xcf01) > <7>[13992.642210] pci 0000:03:07.0: restoring config space at offset 0x4 > (was 0xfdeff000, writing 0xfdefe000) > <7>[13992.642216] pci 0000:03:07.0: restoring config space at offset 0x3 > (was 0x4000, writing 0x4008) > <7>[13992.642223] pci 0000:03:07.0: restoring config space at offset 0x1 > (was 0x2100006, writing 0x2100007) > <6>[13992.642365] PM: early resume of devices complete after 0.794 msecs > <6>[13992.642490] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> > IRQ 22 > <6>[13992.642553] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, > low) -> IRQ 16 > <6>[13992.642578] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, > low) -> IRQ 17 > <6>[13992.642635] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, > low) -> IRQ 18 > <6>[13992.642656] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, > low) -> IRQ 17 > <6>[13992.642672] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, > low) -> IRQ 18 > <6>[13992.642683] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, > low) -> IRQ 19 > <6>[13992.642696] ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, > low) -> IRQ 16 > <6>[13992.642708] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, > low) -> IRQ 16 > <6>[13992.642745] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) > -> IRQ 18 > <6>[13992.642750] HDA Intel 0000:01:05.2: PCI INT B -> GSI 19 (level, > low) -> IRQ 19 > <6>[13992.642769] pcieport 0000:00:07.0: wake-up capability disabled by ACPI > <7>[13992.642775] r8169 0000:02:00.0: PME# disabled > <6>[13992.643139] serial 00:08: activated > <6>[13992.643431] parport_pc 00:09: activated > <6>[13992.643483] saa7133[0]: board init: gpio is 600e000 > <5>[13992.643690] sd 0:0:0:0: [sda] Starting disk > <5>[13992.643731] sd 1:0:0:0: [sdb] Starting disk > <5>[13992.643764] sd 2:0:0:0: [sdc] Starting disk > <6>[13992.649072] r8169 0000:02:00.0: eth0: link down > <6>[13992.730027] [drm] radeon: 1 quad pipes, 1 z pipes initialized. > <6>[13992.736224] radeon 0000:01:05.0: WB enabled > <6>[13992.736257] [drm] radeon: ring at 0x0000000080001000 > <6>[13992.736275] [drm] ring test succeeded in 1 usecs > <6>[13992.736292] [drm] ib test succeeded in 0 usecs > <6>[13992.885014] usb 3-2: reset full speed USB device number 2 using > ohci_hcd > <4>[13993.037904] btusb 3-2:1.0: no reset_resume for driver btusb? > <4>[13993.037906] btusb 3-2:1.1: no reset_resume for driver btusb? > <3>[13993.103027] ata4: softreset failed (device not ready) > <4>[13993.103030] ata4: applying SB600 PMP SRST workaround and retrying > <6>[13993.258026] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > <6>[13993.258986] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[13993.301531] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[13993.301534] ata4.00: configured for UDMA/100 > <6>[13994.394988] r8169 0000:02:00.0: eth0: link up > <3>[13995.805018] ata3: softreset failed (device not ready) > <4>[13995.805021] ata3: applying SB600 PMP SRST workaround and retrying > <6>[13995.960033] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > <6>[13995.990710] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[13995.991668] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[13995.991670] ata3.00: configured for UDMA/133 > <3>[14000.395016] ata1: softreset failed (device not ready) > <4>[14000.395019] ata1: applying SB600 PMP SRST workaround and retrying > <6>[14000.550024] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > <6>[14000.552018] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[14000.554049] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[14000.554051] ata1.00: configured for UDMA/133 > <3>[14001.211018] ata2: softreset failed (device not ready) > <4>[14001.211021] ata2: applying SB600 PMP SRST workaround and retrying > <6>[14001.366037] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > <6>[14003.070942] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[14003.074337] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[14003.074339] ata2.00: configured for UDMA/133 > <6>[14004.069046] PM: resume of devices complete after 11426.606 msecs > <4>[14004.069403] Restarting tasks ... done. > <6>[14004.407337] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[14004.409365] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[14004.409368] ata1.00: configured for UDMA/133 > <6>[14004.409373] ata1: EH complete > <6>[14004.705354] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[14004.708749] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[14004.708757] ata2.00: configured for UDMA/133 > <6>[14004.708763] ata2: EH complete > <6>[14005.155257] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[14005.156333] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd > <6>[14005.156336] ata3.00: configured for UDMA/133 > <6>[14005.156341] ata3: EH complete > <6>[14005.225567] EXT4-fs (dm-4): re-mounted. Opts: commit=0 > <6>[14005.228495] EXT4-fs (dm-7): re-mounted. Opts: commit=0 > <6>[14005.236372] EXT4-fs (dm-6): re-mounted. Opts: commit=0 > <6>[14005.239412] EXT4-fs (dm-0): re-mounted. Opts: commit=0 > <1>[14166.454185] BUG: unable to handle kernel paging request at > ffffffff88317734 > <1>[14166.454328] IP: [<ffffffff81397cfe>] usb_hcd_irq+0x3/0x58 > <4>[14166.454432] PGD 16c7067 PUD 16cb063 PMD 0 > <0>[14166.454522] Oops: 0000 [#1] PREEMPT SMP > <4>[14166.454608] CPU 0 > <4>[14166.454645] Modules linked in: saa7134_alsa tda1004x saa7134_dvb > videobuf_dvb dvb_core ir_kbd_i2c tda827x tda8290 ir_lirc_codec lirc_dev > ir_sony_decoder snd_hda_codec_realtek ir_jvc_decoder snd_hda_intel > snd_hda_codec tuner ir_rc6_decoder ir_rc5_decoder parport_pc saa7134 > rc_imon_mce ir_nec_decoder imon parport rc_core snd_hwdep sg > videobuf_dma_sg videobuf_core v4l2_common videodev rtc_cmos i2c_piix4 > asus_atk0110 pcspkr v4l2_compat_ioctl32 tveeprom atiixp > <4>[14166.455155] > <4>[14166.455155] Pid: 0, comm: swapper Not tainted 3.0.3-dirty #37 > System manufacturer System Product Name/M2A-VM HDMI > <4>[14166.455155] RIP: 0010:[<ffffffff81397cfe>] [<ffffffff81397cfe>] > usb_hcd_irq+0x3/0x58 > <4>[14166.455155] RSP: 0018:ffff880077c03ee0 EFLAGS: 00010096 > <4>[14166.455155] RAX: 0000000000000000 RBX: ffff8800737797c0 RCX: > ffff880077c00000 > <4>[14166.455155] RDX: 0000000000000000 RSI: ffff880073771000 RDI: > 0000000000000011 > <4>[14166.455155] RBP: ffffffff816ad340 R08: 0000000000000000 R09: > 0000000000000000 > <4>[14166.455155] R10: 0000000000000000 R11: 00000ce26247d7b8 R12: > 0000000000000000 > <4>[14166.455155] R13: 0000000000000011 R14: 0000000000000000 R15: > 0000000000000000 > <4>[14166.455155] FS: 00007fe1c1951700(0000) GS:ffff880077c00000(0000) > knlGS:0000000000000000 > <4>[14166.455155] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > <4>[14166.455155] CR2: ffffffff88317734 CR3: 0000000073213000 CR4: > 00000000000006f0 > <4>[14166.455155] DR0: 0000000000000000 DR1: 0000000000000000 DR2: > 0000000000000000 > <4>[14166.455155] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: > 0000000000000400 > <4>[14166.455155] Process swapper (pid: 0, threadinfo ffffffff816aa000, > task ffffffff816cd020) > <0>[14166.455155] Stack: > <4>[14166.455155] ffffffff810735f9 ffff880077c0c9c0 ffffffff816ad340 > ffffffff816ad3bc > <4>[14166.455155] ffff8800737797c0 ffffffff816abea8 0000000000000000 > 0000000000000000 > <4>[14166.455155] ffffffff8107371e ffffffff816abea8 ffffffff81049bb3 > ffffffff816ad340 > <0>[14166.455155] Call Trace: > <0>[14166.455155] <IRQ> > <4>[14166.455155] [<ffffffff810735f9>] ? handle_irq_event_percpu+0x26/0x117 > <4>[14166.455155] [<ffffffff8107371e>] ? handle_irq_event+0x34/0x52 > <4>[14166.455155] [<ffffffff81049bb3>] ? sched_clock_local+0x13/0x76 > <4>[14166.455155] [<ffffffff81075500>] ? handle_fasteoi_irq+0x78/0x9c > <4>[14166.455155] [<ffffffff81003f32>] ? handle_irq+0x17/0x1d > <4>[14166.455155] [<ffffffff8100381e>] ? do_IRQ+0x45/0xaa > <4>[14166.455155] [<ffffffff814c4913>] ? common_interrupt+0x13/0x13 > <0>[14166.455155] <EOI> > <4>[14166.455155] [<ffffffff81008c8c>] ? default_idle+0x20/0x34 > <4>[14166.455155] [<ffffffff81008de8>] ? amd_e400_idle+0xe3/0xe7 > <4>[14166.455155] [<ffffffff81001d62>] ? cpu_idle+0x56/0x93 > <4>[14166.455155] [<ffffffff8172697d>] ? start_kernel+0x354/0x35f > <4>[14166.455155] [<ffffffff8172619e>] ? x86_64_start_kernel+0xea/0xee > <0>[14166.455155] Code: 89 3a 76 3e 89 3f 76 39 89 37 75 35 89 35 75 3b > 88 40 76 3b 88 3a 76 39 88 35 76 39 88 3d 76 37 89 36 76 39 88 39 76 3e > 89 41 76 > <39>[14166.459639] 88 34 77 31 88 31 78 30 87 2f 79 2d 84 2b 7b 2a 83 > 2a 7c 2d > <1>[14166.459639] RIP [<ffffffff81397cfe>] usb_hcd_irq+0x3/0x58 > <4>[14166.459639] RSP <ffff880077c03ee0> > <0>[14166.459639] CR2: ffffffff88317734 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to majordomo@xxxxxxxxx. For more info on Linux MM, see: http://www.linux-mm.org/ . Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/ Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>