[PATCH 2/2] mm/slub: Fix slab_mutex circular locking problem in slab_attr_store()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The following lockdep splat was reported:

  [  176.241923] ======================================================
  [  176.241924] WARNING: possible circular locking dependency detected
  [  176.241926] 4.18.0-172.rt13.29.el8.x86_64+debug #1 Not tainted
  [  176.241927] ------------------------------------------------------
  [  176.241929] slub_cpu_partia/5371 is trying to acquire lock:
  [  176.241930] ffffffffa0b83718 (slab_mutex){+.+.}, at: slab_attr_store+0x6b/0xe0
  [  176.241941]
                 but task is already holding lock:
  [  176.241942] ffff88bb6d8b83c8 (kn->count#103){++++}, at: kernfs_fop_write+0x1cc/0x400
  [  176.241947]
                 which lock already depends on the new lock.

  [  176.241949]
                 the existing dependency chain (in reverse order) is:
  [  176.241949]
                 -> #1 (kn->count#103){++++}:
  [  176.241955]        __kernfs_remove+0x616/0x800
  [  176.241957]        kernfs_remove_by_name_ns+0x3e/0x80
  [  176.241959]        sysfs_slab_add+0x1c6/0x330
  [  176.241961]        __kmem_cache_create+0x15f/0x1b0
  [  176.241964]        create_cache+0xe1/0x220
  [  176.241966]        kmem_cache_create_usercopy+0x1a3/0x260
  [  176.241967]        kmem_cache_create+0x12/0x20
  [  176.242076]        mlx5_init_fs+0x18d/0x1a00 [mlx5_core]
  [  176.242100]        mlx5_load_one+0x3b4/0x1730 [mlx5_core]
  [  176.242124]        init_one+0x901/0x11b0 [mlx5_core]
  [  176.242127]        local_pci_probe+0xd4/0x180
  [  176.242131]        work_for_cpu_fn+0x51/0xa0
  [  176.242133]        process_one_work+0x91a/0x1ac0
  [  176.242134]        worker_thread+0x536/0xb40
  [  176.242136]        kthread+0x30c/0x3d0
  [  176.242140]        ret_from_fork+0x27/0x50
  [  176.242140]
                 -> #0 (slab_mutex){+.+.}:
  [  176.242145]        __lock_acquire+0x22cb/0x48c0
  [  176.242146]        lock_acquire+0x134/0x4c0
  [  176.242148]        _mutex_lock+0x28/0x40
  [  176.242150]        slab_attr_store+0x6b/0xe0
  [  176.242151]        kernfs_fop_write+0x251/0x400
  [  176.242154]        vfs_write+0x157/0x460
  [  176.242155]        ksys_write+0xb8/0x170
  [  176.242158]        do_syscall_64+0x13c/0x710
  [  176.242160]        entry_SYSCALL_64_after_hwframe+0x6a/0xdf
  [  176.242161]
                 other info that might help us debug this:

  [  176.242161]  Possible unsafe locking scenario:

  [  176.242162]        CPU0                    CPU1
  [  176.242163]        ----                    ----
  [  176.242163]   lock(kn->count#103);
  [  176.242165]                                lock(slab_mutex);
  [  176.242166]                                lock(kn->count#103);
  [  176.242167]   lock(slab_mutex);
  [  176.242169]
                  *** DEADLOCK ***

  [  176.242170] 3 locks held by slub_cpu_partia/5371:
  [  176.242170]  #0: ffff888705e3a800 (sb_writers#4){.+.+}, at: vfs_write+0x31c/0x460
  [  176.242174]  #1: ffff889aeec4d658 (&of->mutex){+.+.}, at: kernfs_fop_write+0x1a9/0x400
  [  176.242177]  #2: ffff88bb6d8b83c8 (kn->count#103){++++}, at: kernfs_fop_write+0x1cc/0x400
  [  176.242180]
                 stack backtrace:
  [  176.242183] CPU: 36 PID: 5371 Comm: slub_cpu_partia Not tainted 4.18.0-172.rt13.29.el8.x86_64+debug #1
  [  176.242184] Hardware name: AMD Corporation DAYTONA_X/DAYTONA_X, BIOS RDY1005C 11/22/2019
  [  176.242185] Call Trace:
  [  176.242190]  dump_stack+0x9a/0xf0
  [  176.242193]  check_noncircular+0x317/0x3c0
  [  176.242195]  ? print_circular_bug+0x1e0/0x1e0
  [  176.242199]  ? native_sched_clock+0x32/0x1e0
  [  176.242202]  ? sched_clock+0x5/0x10
  [  176.242205]  ? sched_clock_cpu+0x238/0x340
  [  176.242208]  __lock_acquire+0x22cb/0x48c0
  [  176.242213]  ? trace_hardirqs_on+0x10/0x10
  [  176.242215]  ? trace_hardirqs_on+0x10/0x10
  [  176.242218]  lock_acquire+0x134/0x4c0
  [  176.242220]  ? slab_attr_store+0x6b/0xe0
  [  176.242223]  _mutex_lock+0x28/0x40
  [  176.242225]  ? slab_attr_store+0x6b/0xe0
  [  176.242227]  slab_attr_store+0x6b/0xe0
  [  176.242229]  ? sysfs_file_ops+0x160/0x160
  [  176.242230]  kernfs_fop_write+0x251/0x400
  [  176.242232]  ? __sb_start_write+0x26a/0x3f0
  [  176.242234]  vfs_write+0x157/0x460
  [  176.242237]  ksys_write+0xb8/0x170
  [  176.242239]  ? __ia32_sys_read+0xb0/0xb0
  [  176.242242]  ? do_syscall_64+0xb9/0x710
  [  176.242245]  do_syscall_64+0x13c/0x710
  [  176.242247]  entry_SYSCALL_64_after_hwframe+0x6a/0xdf

There was another lockdep splat generated by echoing "1" to
"/sys/kernel/slab/fs_cache/shrink":

[  445.231443] Chain exists of:
                 cpu_hotplug_lock --> mem_hotplug_lock --> slab_mutex

[  445.242025]  Possible unsafe locking scenario:

[  445.247977]        CPU0                    CPU1
[  445.252529]        ----                    ----
[  445.257082]   lock(slab_mutex);
[  445.260239]                                lock(mem_hotplug_lock);
[  445.266452]                                lock(slab_mutex);
[  445.272141]   lock(cpu_hotplug_lock);

So it is problematic to use slab_mutex to iterate the list of
child memcgs with for_each_memcg_cache(). Fortunately, there is
another way to do child memcg iteration by going through the array
entries in memcg_params.memcg_caches while holding a read lock on
memcg_cache_ids_sem.

To avoid other possible circular locking problems, we only take a
reference to the child memcgs and store their addresses while holding
memcg_cache_ids_sem. The actual store method is called for each of the
child memcgs after releasing the lock.

Signed-off-by: Waiman Long <longman@xxxxxxxxxx>
---
 mm/slub.c | 56 +++++++++++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 48 insertions(+), 8 deletions(-)

diff --git a/mm/slub.c b/mm/slub.c
index 183ccc364ccf..255981180489 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -5567,13 +5567,30 @@ static ssize_t slab_attr_store(struct kobject *kobj,
 		return -EIO;
 
 	err = attribute->store(s, buf, len);
-#ifdef CONFIG_MEMCG
-	if (slab_state >= FULL && err >= 0 && is_root_cache(s)) {
-		struct kmem_cache *c;
+#ifdef CONFIG_MEMCG_KMEM
+	if (slab_state >= FULL && err >= 0 && is_root_cache(s) &&
+	    !list_empty(&s->memcg_params.children)) {
+		struct kmem_cache *c, **pcaches;
+		int idx, max, cnt = 0;
+		size_t size = s->max_attr_size;
+		struct memcg_cache_array *arr;
+
+		/*
+		 * Make atomic update to s->max_attr_size.
+		 */
+		do {
+			if (len <= size)
+				break;
+		} while (!try_cmpxchg(&s->max_attr_size, &size, len));
 
-		mutex_lock(&slab_mutex);
-		if (s->max_attr_size < len)
-			s->max_attr_size = len;
+		memcg_get_cache_ids();
+		max = memcg_nr_cache_ids;
+
+		pcaches = kmalloc_array(max, sizeof(void *), GFP_KERNEL);
+		if (!pcaches) {
+			memcg_put_cache_ids();
+			return -ENOMEM;
+		}
 
 		/*
 		 * This is a best effort propagation, so this function's return
@@ -5591,10 +5608,33 @@ static ssize_t slab_attr_store(struct kobject *kobj,
 		 * has well defined semantics. The cache being written to
 		 * directly either failed or succeeded, in which case we loop
 		 * through the descendants with best-effort propagation.
+		 *
+		 * To avoid potential circular lock dependency problems, we
+		 * just get a reference and store child cache pointers while
+		 * holding the memcg_cache_ids_sem read lock. The store
+		 * method is then called for each child cache after releasing
+		 * the lock. Code sequence partly borrowed from
+		 * memcg_kmem_get_cache().
 		 */
-		for_each_memcg_cache(c, s)
+		rcu_read_lock();
+		arr = rcu_dereference(s->memcg_params.memcg_caches);
+		for (idx = 0; idx < max; idx++) {
+			c = READ_ONCE(arr->entries[idx]);
+			if (!c)
+				continue;
+			if (!percpu_ref_tryget(&c->memcg_params.refcnt))
+				continue;
+			pcaches[cnt++] = c;
+		}
+		rcu_read_unlock();
+		memcg_put_cache_ids();
+
+		for (idx = 0; idx < cnt; idx++) {
+			c = pcaches[idx];
 			attribute->store(c, buf, len);
-		mutex_unlock(&slab_mutex);
+			percpu_ref_put(&c->memcg_params.refcnt);
+		}
+		kfree(pcaches);
 	}
 #endif
 	return err;
-- 
2.18.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux