On 02/07/2020 01:44 PM, Guenter Roeck wrote:
On 2/7/20 5:29 AM, Christophe Leroy wrote:
On 02/07/2020 01:08 PM, Guenter Roeck wrote:
On 2/7/20 12:28 AM, Christophe Leroy wrote:
On 02/07/2020 06:13 AM, Christophe Leroy wrote:
Le 06/02/2020 à 21:31, Guenter Roeck a écrit :
On Sat, Dec 21, 2019 at 08:32:38AM +0000, Christophe Leroy wrote:
A few changes to retrieve DAR and DSISR from struct regs
instead of retrieving them directly, as they may have
changed due to a TLB miss.
Also modifies hash_page() and friends to work with virtual
data addresses instead of physical ones. Same on load_up_fpu()
and load_up_altivec().
Signed-off-by: Christophe Leroy <christophe.leroy@xxxxxx>
This patch results in qemu boot failures (mac99 with
pmac32_defconfig).
Images fail silently; there is no console output. Reverting the patch
fixes the problem. Bisect log is attached below.
Assuming this was tested on real hardware, am I correct to assume
that qemu
for ppc32 (more specifically, qemu's mac99 and g3beige machines)
no longer
works with the upstream kernel ?
Before submitting the series, I successfully tested:
- Real HW with powerpc 8xx
- Real HW with powerpc 832x
- Qemu's mac99
I'll re-check the upstream kernel.
This is still working for me with the upstream kernel:
Interesting. What is your kernel configuration, your qemu version, and
your qemu command line ?
Config is pmac32_defconfig + CONFIG_DEVTMPFS (But kernel also boots
without CONFIG_DEVTMPFS)
QEMU emulator version 2.11.2
qemu-system-ppc -kernel vmlinux -M mac99 -initrd rootfs.cpio.gz -s -m
1024
Works with both GCC 5.5 and GCC 8.1
Actually, the problem is that I have locking selftest options enabled
in my tests. Everything works if I disable those. The "culprit" seems
to be CONFIG_PROVE_LOCKING. Can you retest with CONFIG_PROVE_LOCKING=y ?
With CONFIG_PROVE_LOCKING, I get a deadlock after:
[...]
Kernel virtual memory layout:
* 0xffbcf000..0xfffff000 : fixmap
* 0xff400000..0xff800000 : highmem PTEs
* 0xfeb36000..0xff400000 : early ioremap
* 0xf1000000..0xfeb36000 : vmalloc & ioremap
SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Running RCU self tests
NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
mpic: Resetting
mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 1 CPUs
mpic: ISU size: 64, shift: 6, mask: 3f
mpic: Initializing for 64 sources
GMT Delta read from XPRAM: 0 minutes, DST: on
time_init: decrementer frequency = 100.000000 MHz
time_init: processor frequency = 900.000000 MHz
clocksource: timebase: mask: 0xffffffffffffffff max_cycles:
0x171024e7e0, max_idle_ns: 440795205315 ns
clocksource: timebase mult[a000000] shift[24] registered
clockevent: decrementer mult[1999999a] shift[32] cpu[0]
Console: colour dummy device 80x25
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
Please test the patch I'll send out in a few minutes.
Thanks
Christophe
