[PATCH] mm/kasan: Don't vfree() nonexistent vm_area.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



KASAN uses different routines to map shadow for hot added memory and memory
obtained in boot process. Attempt to offline memory onlined by normal boot
process leads to this:

    Trying to vfree() nonexistent vm area (000000005d3b34b9)
    WARNING: CPU: 2 PID: 13215 at mm/vmalloc.c:1525 __vunmap+0x147/0x190

    Call Trace:
     kasan_mem_notifier+0xad/0xb9
     notifier_call_chain+0x166/0x260
     __blocking_notifier_call_chain+0xdb/0x140
     __offline_pages+0x96a/0xb10
     memory_subsys_offline+0x76/0xc0
     device_offline+0xb8/0x120
     store_mem_state+0xfa/0x120
     kernfs_fop_write+0x1d5/0x320
     __vfs_write+0xd4/0x530
     vfs_write+0x105/0x340
     SyS_write+0xb0/0x140

Obviously we can't call vfree() to free memory that wasn't allocated via
vmalloc(). Use find_vm_area() to see if we can call vfree().

Unfortunately it's a bit tricky to properly unmap and free shadow allocated
during boot, so we'll have to keep it. If memory will come online again
that shadow will be reused.

Fixes: fa69b5989bb0 ("mm/kasan: add support for memory hotplug")
Reported-by: Paul Menzel <pmenzel+linux-kasan-dev@xxxxxxxxxxxxx>
Signed-off-by: Andrey Ryabinin <aryabinin@xxxxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>
---
 mm/kasan/kasan.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 55 insertions(+), 2 deletions(-)

diff --git a/mm/kasan/kasan.c b/mm/kasan/kasan.c
index e13d911251e7..0d9d9d268f32 100644
--- a/mm/kasan/kasan.c
+++ b/mm/kasan/kasan.c
@@ -791,6 +791,41 @@ DEFINE_ASAN_SET_SHADOW(f5);
 DEFINE_ASAN_SET_SHADOW(f8);
 
 #ifdef CONFIG_MEMORY_HOTPLUG
+static bool shadow_mapped(unsigned long addr)
+{
+	pgd_t *pgd = pgd_offset_k(addr);
+	p4d_t *p4d;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+
+	if (pgd_none(*pgd))
+		return false;
+	p4d = p4d_offset(pgd, addr);
+	if (p4d_none(*p4d))
+		return false;
+	pud = pud_offset(p4d, addr);
+	if (pud_none(*pud))
+		return false;
+
+	/*
+	 * We can't use pud_large() or pud_huge(), the first one
+	 * is arch-specific, the last one depend on HUGETLB_PAGE.
+	 * So let's abuse pud_bad(), if bud is bad it's has to
+	 * because it's huge.
+	 */
+	if (pud_bad(*pud))
+		return true;
+	pmd = pmd_offset(pud, addr);
+	if (pmd_none(*pmd))
+		return false;
+
+	if (pmd_bad(*pmd))
+		return true;
+	pte = pte_offset_kernel(pmd, addr);
+	return !pte_none(*pte);
+}
+
 static int __meminit kasan_mem_notifier(struct notifier_block *nb,
 			unsigned long action, void *data)
 {
@@ -812,6 +847,14 @@ static int __meminit kasan_mem_notifier(struct notifier_block *nb,
 	case MEM_GOING_ONLINE: {
 		void *ret;
 
+		/*
+		 * If shadow is mapped already than it must have been mapped
+		 * during the boot. This could happen if we onlining previously
+		 * offlined memory.
+		 */
+		if (shadow_mapped(shadow_start))
+			return NOTIFY_OK;
+
 		ret = __vmalloc_node_range(shadow_size, PAGE_SIZE, shadow_start,
 					shadow_end, GFP_KERNEL,
 					PAGE_KERNEL, VM_NO_GUARD,
@@ -823,8 +866,18 @@ static int __meminit kasan_mem_notifier(struct notifier_block *nb,
 		kmemleak_ignore(ret);
 		return NOTIFY_OK;
 	}
-	case MEM_OFFLINE:
-		vfree((void *)shadow_start);
+	case MEM_OFFLINE: {
+		struct vm_struct *vm;
+
+		/*
+		 * Only hot-added memory have vm_area. Freeing shadow
+		 * mapped during boot would be tricky, so we'll just
+		 * have to keep it.
+		 */
+		vm = find_vm_area((void *)shadow_start);
+		if (vm)
+			vfree((void *)shadow_start);
+	}
 	}
 
 	return NOTIFY_OK;
-- 
2.13.6

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux