From: Joerg Roedel <jroedel@xxxxxxx>
Use the sysenter stack as a trampoline stack to enter the
kernel. The sysenter stack is already in the cpu_entry_area
and will be mapped to userspace when PTI is enabled.
Signed-off-by: Joerg Roedel <jroedel@xxxxxxx>
---
arch/x86/entry/entry_32.S | 89 +++++++++++++++++++++++++++++++++++-----
arch/x86/include/asm/switch_to.h | 6 +--
arch/x86/kernel/asm-offsets_32.c | 4 +-
arch/x86/kernel/cpu/common.c | 5 ++-
arch/x86/kernel/process.c | 2 -
arch/x86/kernel/process_32.c | 6 +++
6 files changed, 91 insertions(+), 21 deletions(-)
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index eb8c5615777b..5a7bdb73be9f 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -222,6 +222,47 @@
.endm
/*
+ * Switch from the entry-trampline stack to the kernel stack of the
+ * running task.
+ *
+ * nr_regs is the number of dwords to push from the entry stack to the
+ * task stack. If it is > 0 it expects an irq frame at the bottom of the
+ * stack.
+ *
+ * check_user != 0 it will add a check to only switch stacks if the
+ * kernel entry was from user-space.
+ */
+.macro SWITCH_TO_KERNEL_STACK nr_regs=0 check_user=0
+
+ .if \check_user > 0 && \nr_regs > 0
+ testb $3, (\nr_regs - 4)*4(%esp) /* CS */
+ jz .Lend_\@
+ .endif
+
+ pushl %edi
+ movl %esp, %edi
+
+ /*
+ * TSS_sysenter_stack is the offset from the bottom of the
+ * entry-stack
+ */
+ movl TSS_sysenter_stack + ((\nr_regs + 1) * 4)(%esp), %esp
+
+ /* Copy the registers over */
+ .if \nr_regs > 0
+ i = 0
+ .rept \nr_regs
+ pushl (\nr_regs - i) * 4(%edi)
+ i = i + 1
+ .endr
+ .endif
+
+ mov (%edi), %edi
+
+.Lend_\@:
+.endm
+
+/*
* %eax: prev task
* %edx: next task
*/
@@ -401,7 +442,9 @@ ENTRY(xen_sysenter_target)
* 0(%ebp) arg6
*/
ENTRY(entry_SYSENTER_32)
- movl TSS_sysenter_stack(%esp), %esp
+ /* Kernel stack is empty */
+ SWITCH_TO_KERNEL_STACK
+
.Lsysenter_past_esp:
pushl $__USER_DS /* pt_regs->ss */
pushl %ebp /* pt_regs->sp (stashed in bp) */
@@ -521,6 +564,10 @@ ENDPROC(entry_SYSENTER_32)
ENTRY(entry_INT80_32)
ASM_CLAC
pushl %eax /* pt_regs->orig_ax */
+
+ /* Stack layout: ss, esp, eflags, cs, eip, orig_eax */
+ SWITCH_TO_KERNEL_STACK nr_regs=6 check_user=1
+
SAVE_ALL pt_regs_ax=$-ENOSYS /* save rest */
/*
@@ -655,6 +702,10 @@ END(irq_entries_start)
common_interrupt:
ASM_CLAC
addl $-0x80, (%esp) /* Adjust vector into the [-256, -1] range */
+
+ /* Stack layout: ss, esp, eflags, cs, eip, vector */
+ SWITCH_TO_KERNEL_STACK nr_regs=6 check_user=1
+
SAVE_ALL
ENCODE_FRAME_POINTER
TRACE_IRQS_OFF
@@ -663,16 +714,17 @@ common_interrupt:
jmp ret_from_intr
ENDPROC(common_interrupt)
-#define BUILD_INTERRUPT3(name, nr, fn) \
-ENTRY(name) \
- ASM_CLAC; \
- pushl $~(nr); \
- SAVE_ALL; \
- ENCODE_FRAME_POINTER; \
- TRACE_IRQS_OFF \
- movl %esp, %eax; \
- call fn; \
- jmp ret_from_intr; \
+#define BUILD_INTERRUPT3(name, nr, fn) \
+ENTRY(name) \
+ ASM_CLAC; \
+ pushl $~(nr); \
+ SWITCH_TO_KERNEL_STACK nr_regs=6 check_user=1; \
+ SAVE_ALL; \
+ ENCODE_FRAME_POINTER; \
+ TRACE_IRQS_OFF \
+ movl %esp, %eax; \
+ call fn; \
+ jmp ret_from_intr; \
ENDPROC(name)
#define BUILD_INTERRUPT(name, nr) \
@@ -893,6 +945,9 @@ ENTRY(page_fault)
END(page_fault)
common_exception:
+ /* Stack layout: ss, esp, eflags, cs, eip, error_code, handler */
+ SWITCH_TO_KERNEL_STACK nr_regs=7 check_user=1
+
/* the function address is in %gs's slot on the stack */
pushl %fs
pushl %es
@@ -936,6 +991,10 @@ ENTRY(debug)
*/
ASM_CLAC
pushl $-1 # mark this as an int
+
+ /* Stack layout: ss, esp, eflags, cs, eip, $-1 */
+ SWITCH_TO_KERNEL_STACK nr_regs=6 check_user=1
+
SAVE_ALL
ENCODE_FRAME_POINTER
xorl %edx, %edx # error code 0
@@ -971,6 +1030,10 @@ END(debug)
*/
ENTRY(nmi)
ASM_CLAC
+
+ /* Stack layout: ss, esp, eflags, cs, eip */
+ SWITCH_TO_KERNEL_STACK nr_regs=5 check_user=1
+
#ifdef CONFIG_X86_ESPFIX32
pushl %eax
movl %ss, %eax
@@ -1034,6 +1097,10 @@ END(nmi)
ENTRY(int3)
ASM_CLAC
pushl $-1 # mark this as an int
+
+ /* Stack layout: ss, esp, eflags, cs, eip, vector */
+ SWITCH_TO_KERNEL_STACK nr_regs=6 check_user=1
+
SAVE_ALL
ENCODE_FRAME_POINTER
TRACE_IRQS_OFF
diff --git a/arch/x86/include/asm/switch_to.h b/arch/x86/include/asm/switch_to.h
index eb5f7999a893..20e5f7ab8260 100644
--- a/arch/x86/include/asm/switch_to.h
+++ b/arch/x86/include/asm/switch_to.h
@@ -89,13 +89,9 @@ static inline void refresh_sysenter_cs(struct thread_struct *thread)
/* This is used when switching tasks or entering/exiting vm86 mode. */
static inline void update_sp0(struct task_struct *task)
{
- /* On x86_64, sp0 always points to the entry trampoline stack, which is constant: */
-#ifdef CONFIG_X86_32
- load_sp0(task->thread.sp0);
-#else
+ /* sp0 always points to the entry trampoline stack, which is constant: */
if (static_cpu_has(X86_FEATURE_XENPV))
load_sp0(task_top_of_stack(task));
-#endif
}
#endif /* _ASM_X86_SWITCH_TO_H */
diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c
index 654229bac2fc..7270dd834f4b 100644
--- a/arch/x86/kernel/asm-offsets_32.c
+++ b/arch/x86/kernel/asm-offsets_32.c
@@ -47,9 +47,11 @@ void foo(void)
BLANK();
/* Offset from the sysenter stack to tss.sp0 */
- DEFINE(TSS_sysenter_stack, offsetof(struct cpu_entry_area, tss.x86_tss.sp0) -
+ DEFINE(TSS_sysenter_stack, offsetof(struct cpu_entry_area, tss.x86_tss.sp1) -
offsetofend(struct cpu_entry_area, entry_stack_page.stack));
+ OFFSET(TSS_sp1, tss_struct, x86_tss.sp1);
+
#ifdef CONFIG_CC_STACKPROTECTOR
BLANK();
OFFSET(stack_canary_offset, stack_canary, canary);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index ef29ad001991..20a71c914e59 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1649,11 +1649,12 @@ void cpu_init(void)
enter_lazy_tlb(&init_mm, curr);
/*
- * Initialize the TSS. Don't bother initializing sp0, as the initial
- * task never enters user mode.
+ * Initialize the TSS. sp0 points to the entry trampoline stack
+ * regardless of what task is running.
*/
set_tss_desc(cpu, &get_cpu_entry_area(cpu)->tss.x86_tss);
load_TR_desc();
+ load_sp0((unsigned long)(cpu_entry_stack(cpu) + 1));
load_mm_ldt(&init_mm);
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 832a6acd730f..a9950946b263 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -57,14 +57,12 @@ __visible DEFINE_PER_CPU_PAGE_ALIGNED(struct tss_struct, cpu_tss_rw) = {
*/
.sp0 = (1UL << (BITS_PER_LONG-1)) + 1,
-#ifdef CONFIG_X86_64
/*
* .sp1 is cpu_current_top_of_stack. The init task never
* runs user code, but cpu_current_top_of_stack should still
* be well defined before the first context switch.
*/
.sp1 = TOP_OF_INIT_STACK,
-#endif
#ifdef CONFIG_X86_32
.ss0 = __KERNEL_DS,
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 5224c6099184..452eeac00b80 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -292,6 +292,12 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
this_cpu_write(cpu_current_top_of_stack,
(unsigned long)task_stack_page(next_p) +
THREAD_SIZE);
+ /*
+ * TODO: Find a way to let cpu_current_top_of_stack point to
+ * cpu_tss_rw.x86_tss.sp1. Doing so now results in stack corruption with
+ * iret exceptions.
+ */
+ this_cpu_write(cpu_tss_rw.x86_tss.sp1, next_p->thread.sp0);
/*
* Restore %gs if needed (which is common)
--
2.13.6
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>
