On Mon, 11 Jan 2016, Aneesh Kumar K.V wrote:
> Hugh Dickins <hughd@xxxxxxxxxx> writes:
>
> > Swapoff after swapping hangs on the G5, when CONFIG_CHECKPOINT_RESTORE=y
> > but CONFIG_MEM_SOFT_DIRTY is not set. That's because the non-zero
> > _PAGE_SWP_SOFT_DIRTY bit, added by CONFIG_HAVE_ARCH_SOFT_DIRTY=y, is not
> > discounted when CONFIG_MEM_SOFT_DIRTY is not set: so swap ptes cannot be
> > recognized.
> >
> > (I suspect that the peculiar dependence of HAVE_ARCH_SOFT_DIRTY on
> > CHECKPOINT_RESTORE in arch/powerpc/Kconfig comes from an incomplete
> > attempt to solve this problem.)
> >
> > It's true that the relationship between CONFIG_HAVE_ARCH_SOFT_DIRTY and
> > and CONFIG_MEM_SOFT_DIRTY is too confusing, and it's true that swapoff
> > should be made more robust; but nevertheless, fix up the powerpc ifdefs
> > as x86_64 and s390 (which met the same problem) have them, defining the
> > bits as 0 if CONFIG_MEM_SOFT_DIRTY is not set.
>
> Do we need this patch, if we make the maybe_same_pte() more robust. The
> #ifdef with pte bits is always a confusing one and IMHO, we should avoid
> that if we can ?
If maybe_same_pte() were more robust (as in the pte_same_as_swp() patch),
this patch here becomes an optimization rather than a correctness patch:
without this patch here, pte_same_as_swp() will perform an unnecessary
transformation (masking out _PAGE_SWP_SOFT_DIRTY) from every one of the
millions of ptes it has to examine, on configs where it couldn't be set.
Or perhaps the processor gets that all nicely lined up without any actual
delay, I don't know.
I've already agreed that the way SOFT_DIRTY is currently config'ed is
too confusing; but until that's improved, I strongly recommend that you
follow the same way of handling this as x86_64 and s390 are doing - going
off and doing it differently is liable to lead to error, as we have seen.
So I recommend using the patch below too, whether or not you care for
the optimization.
Hugh
>
> >
> > Signed-off-by: Hugh Dickins <hughd@xxxxxxxxxx>
> > ---
> >
> > arch/powerpc/include/asm/book3s/64/hash.h | 5 +++++
> > arch/powerpc/include/asm/book3s/64/pgtable.h | 9 ++++++---
> > 2 files changed, 11 insertions(+), 3 deletions(-)
> >
> > --- 4.4-next/arch/powerpc/include/asm/book3s/64/hash.h 2016-01-06 11:54:01.377508976 -0800
> > +++ linux/arch/powerpc/include/asm/book3s/64/hash.h 2016-01-09 13:54:24.410893347 -0800
> > @@ -33,7 +33,12 @@
> > #define _PAGE_F_GIX_SHIFT 12
> > #define _PAGE_F_SECOND 0x08000 /* Whether to use secondary hash or not */
> > #define _PAGE_SPECIAL 0x10000 /* software: special page */
> > +
> > +#ifdef CONFIG_MEM_SOFT_DIRTY
> > #define _PAGE_SOFT_DIRTY 0x20000 /* software: software dirty tracking */
> > +#else
> > +#define _PAGE_SOFT_DIRTY 0x00000
> > +#endif
> >
> > /*
> > * We need to differentiate between explicit huge page and THP huge
> > --- 4.4-next/arch/powerpc/include/asm/book3s/64/pgtable.h 2016-01-06 11:54:01.377508976 -0800
> > +++ linux/arch/powerpc/include/asm/book3s/64/pgtable.h 2016-01-09 13:54:24.410893347 -0800
> > @@ -162,8 +162,13 @@ static inline void pgd_set(pgd_t *pgdp,
> > #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val((pte)) })
> > #define __swp_entry_to_pte(x) __pte((x).val)
> >
> > -#ifdef CONFIG_HAVE_ARCH_SOFT_DIRTY
> > +#ifdef CONFIG_MEM_SOFT_DIRTY
> > #define _PAGE_SWP_SOFT_DIRTY (1UL << (SWP_TYPE_BITS + _PAGE_BIT_SWAP_TYPE))
> > +#else
> > +#define _PAGE_SWP_SOFT_DIRTY 0UL
> > +#endif /* CONFIG_MEM_SOFT_DIRTY */
> > +
> > +#ifdef CONFIG_HAVE_ARCH_SOFT_DIRTY
> > static inline pte_t pte_swp_mksoft_dirty(pte_t pte)
> > {
> > return __pte(pte_val(pte) | _PAGE_SWP_SOFT_DIRTY);
> > @@ -176,8 +181,6 @@ static inline pte_t pte_swp_clear_soft_d
> > {
> > return __pte(pte_val(pte) & ~_PAGE_SWP_SOFT_DIRTY);
> > }
> > -#else
> > -#define _PAGE_SWP_SOFT_DIRTY 0
> > #endif /* CONFIG_HAVE_ARCH_SOFT_DIRTY */
> >
> > void pgtable_cache_add(unsigned shift, void (*ctor)(void *));
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxx. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>