Hi Sander,
On 20/01/2025 07:34, Sander Vanheule wrote:
The referenced CPU clock does not require any additional #clock-cells,
so drop the extraneous '0' in the referenced CPU clock.
The binding for MIPS cpus also does not allow for the clock-names
property, so just drop it.
This resolves some error message from 'dtbs_check':
cpu@0: clocks: [[4], [0]] is too long
'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Sander Vanheule <sander@xxxxxxxxxxxxx>
Reviewed-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
Tested-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> # For RTL9302C
---
arch/mips/boot/dts/realtek/rtl838x.dtsi | 3 +--
arch/mips/boot/dts/realtek/rtl930x.dtsi | 3 +--
2 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/mips/boot/dts/realtek/rtl838x.dtsi b/arch/mips/boot/dts/realtek/rtl838x.dtsi
index 722106e39194..d2c6baabb38c 100644
--- a/arch/mips/boot/dts/realtek/rtl838x.dtsi
+++ b/arch/mips/boot/dts/realtek/rtl838x.dtsi
@@ -9,8 +9,7 @@ cpu@0 {
device_type = "cpu";
compatible = "mips,mips4KEc";
reg = <0>;
- clocks = <&baseclk 0>;
- clock-names = "cpu";
+ clocks = <&baseclk>;
};
};
diff --git a/arch/mips/boot/dts/realtek/rtl930x.dtsi b/arch/mips/boot/dts/realtek/rtl930x.dtsi
index 67261d6fcaa7..f2e57ea3a60c 100644
--- a/arch/mips/boot/dts/realtek/rtl930x.dtsi
+++ b/arch/mips/boot/dts/realtek/rtl930x.dtsi
@@ -26,8 +26,7 @@ cpu@0 {
device_type = "cpu";
compatible = "mips,mips34Kc";
reg = <0>;
- clocks = <&baseclk 0>;
- clock-names = "cpu";
+ clocks = <&baseclk>;
};
};
