This patch series intends to clean up the base includes, shared between hardware devicetrees. To get rid of some dtbs_check warnings, some cpu clock prorerties are also modified. To indicate why the split-up is required, the series concludes with adding some CPU peripherals to rtl838x.dtsi, which are then used to add a gpio-restart for the Cisco SG220-26P. Sander Vanheule (9): mips: dts: realtek: Decouple RTL930x base DTSI mips: dts: realtek: Clean up CPU clocks mips: dts: realtek: Add address to SoC node name mips: dts: realtek: Fold rtl83xx into rtl838x mips: dts: realtek: Add SoC IRQ node for RTL838x mips: dts: realtek: Correct uart interrupt-parent mips: dts: realtek: Replace uart clock property mips: dts: realtek: Add RTL838x SoC peripherals mips: dts: realtek: Add restart to Cisco SG220-26P arch/mips/boot/dts/realtek/cisco_sg220-26.dts | 10 +- arch/mips/boot/dts/realtek/rtl838x.dtsi | 111 +++++++++++++- arch/mips/boot/dts/realtek/rtl83xx.dtsi | 59 -------- arch/mips/boot/dts/realtek/rtl930x.dtsi | 136 +++++++++++------- 4 files changed, 202 insertions(+), 114 deletions(-) delete mode 100644 arch/mips/boot/dts/realtek/rtl83xx.dtsi -- 2.48.1
