Add a fixed clock to define the clock frequency of the Lexra bus and use
this for the two uart nodes instead of a separate clock-frequency
property.
Signed-off-by: Sander Vanheule <sander@xxxxxxxxxxxxx>
---
arch/mips/boot/dts/realtek/rtl838x.dtsi | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/mips/boot/dts/realtek/rtl838x.dtsi b/arch/mips/boot/dts/realtek/rtl838x.dtsi
index e3183a71765e..246f4f607128 100644
--- a/arch/mips/boot/dts/realtek/rtl838x.dtsi
+++ b/arch/mips/boot/dts/realtek/rtl838x.dtsi
@@ -34,6 +34,12 @@ cpuintc: cpuintc {
interrupt-controller;
};
+ lx_clk: clock-lexra {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+
soc@18000000 {
compatible = "simple-bus";
#address-cells = <1>;
@@ -44,7 +50,7 @@ uart0: serial@2000 {
compatible = "ns16550a";
reg = <0x2000 0x100>;
- clock-frequency = <200000000>;
+ clocks = <&lx_clk>;
interrupt-parent = <&intc>;
interrupts = <31>;
@@ -61,7 +67,7 @@ uart1: serial@2100 {
compatible = "ns16550a";
reg = <0x2100 0x100>;
- clock-frequency = <200000000>;
+ clocks = <&lx_clk>;
interrupt-parent = <&intc>;
interrupts = <30>;
--
2.48.1
