Hello Thomas, > Hello, > > The EyeQ5 SoC from Mobileye is based on the MIPS I6500 architecture > and features multiple controllers such as the classic UART, I2C, SPI, > as well as CAN-FD, PCIe, Octal/Quad SPI Flash interface, Gigabit > Ethernet, MIPI CSI-2, and eMMC 5.1. It also includes a Hardware > Security Module, Functional Safety Hardware, and MJPEG encoder. > > One peculiarity of this SoC is that the physical address of the DDDR > exceeds 32 bits. Given that the architecture is 64 bits, this is not > an issue, but it requires some changes in how the mips64 is currently > managed during boot. > > In this fifth version, there aren't many changes, mostly just tweaking > commit messages based on Sergey's feedback and fixing up the code > style. But, the real reason for this series is a bit of a whoopsie on > my end. It turns out, despite what I confidently claimed in the last > round, some configuration tweaks were missing. All sorted now, though! > A few weeks ago, you were concerned about the introduction of the specific kconfig CONFIG_USE_XKPHYS to support EyeQ5, and you wanted us to set up a new platform instead. Since then, Jiaxun proposed a series that was merged here to provide more generic support. I had other issues in the initial series, and I think that now I've fixed all of them. So, I would like to know what your opinion is now about this series. Will you accept it, or do you still think that a new platform has to be set up? Regards, Gregory > To build and test the kernel, we need to run the following commands: > > make 64r6el_defconfig BOARDS=eyeq5 > make vmlinuz.itb > > Changelog: > > v4 -> v5: > > - Improve commit messages for patch 3, 5, 12 and 13. > > - Fix style in patch 9 > > - Really enable SPARSMEM and use correct address in > board-eyeq5.config in patch 21 > > v3 -> v4: > > - Fix build warning in "MIPS: Get rid of CONFIG_NO_EXCEPT_FILL": > check that we are in 64bit mode before using KSEG0 that exist only > in this mode. > > - Modify "MIPS: spaces: Define a couple of handy macros" to be > buildable in 32bit mode. > > - Use correct format specifier to print address in "MIPS: traps: Give > more explanations if ebase doesn't belong to KSEG0" > > - In "MIPS: generic: Add support for Mobileye EyeQ5",remove > CONFIG_ZBOOT_LOAD_ADDRESS from board-eyeq5.config, (as well as > CONFIG_USE_XKPHYS that does not exist anymore) and add > CONFIG_SPARSEMEM_MANUAL to enable SPARSMEM. > > v2 -> v3 > > - Added more reviewed-by and acked-by tags > > - Fix sorting for cpus entries in > > - Fix indentation issue in Documentation/devicetree/bindings/mips/mobileye.yaml > > v1 -> v2 > > - Added reviewed-by and acked-by tags > > - Fix typos reported > > - In patch 15 use 'img' vendor string instead of mti > > - In patch 16 modify licence > > - In patch 17 give more explanations about the block usage. > > - In patch 18, remove _ in node names, don't use anymore > CONFIG_BUILTIN_DTB in Makefile, remove macro, modify licence. > > - In patch 19 remove most of the bootargs and only keeps earlycon. I > also split the memory in 2 part in the device tree. > > - Integrate the series from Jiaxun Yang > https://lore.kernel.org/linux-mips/20231027221106.405666-1-jiaxun.yang@xxxxxxxxxxx/ > > They are patches 2 to 6 and 8 to 12 > > Then I added patch 7 to fix the cache issue visible on the Mobileye > platform, I also add patch 13 to improve warning message when ebase > doesn't belong to KSEG0 > > Regards, > > Gregory > > Gregory CLEMENT (13): > MIPS: compressed: Use correct instruction for 64 bit code > MIPS: spaces: Define a couple of handy macros > MIPS: Fix cache issue with mips_cps_core_entry > MIPS: traps: Give more explanations if ebase doesn't belong to KSEG0 > dt-bindings: Add vendor prefix for Mobileye Vision Technologies Ltd. > dt-bindings: mips: cpus: Sort the entries > dt-bindings: mips: cpu: Add I-Class I6500 Multiprocessor Core > dt-bindings: mips: Add bindings for Mobileye SoCs > dt-bindings: mfd: syscon: Document EyeQ5 OLB > MIPS: mobileye: Add EyeQ5 dtsi > MIPS: mobileye: Add EPM5 device tree > MIPS: generic: Add support for Mobileye EyeQ5 > MAINTAINERS: Add entry for Mobileye MIPS SoCs > > Jiaxun Yang (9): > MIPS: Export higher/highest relocation functions in uasm > MIPS: genex: Fix except_vec_vi for kernel in XKPHYS > MIPS: Fix set_uncached_handler for ebase in XKPHYS > MIPS: Refactor mips_cps_core_entry implementation > MIPS: Allow kernel base to be set from Kconfig for all platforms > MIPS: traps: Handle CPU with non standard vint offset > MIPS: Avoid unnecessary reservation of exception space > MIPS: traps: Enhance memblock ebase allocation process > MIPS: Get rid of CONFIG_NO_EXCEPT_FILL > > .../devicetree/bindings/mfd/syscon.yaml | 1 + > .../devicetree/bindings/mips/cpus.yaml | 13 +- > .../devicetree/bindings/mips/mobileye.yaml | 32 ++ > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > MAINTAINERS | 12 + > arch/mips/Kconfig | 26 +- > arch/mips/boot/compressed/head.S | 4 +- > arch/mips/boot/dts/Makefile | 1 + > arch/mips/boot/dts/mobileye/Makefile | 4 + > arch/mips/boot/dts/mobileye/eyeq5-epm5.dts | 24 ++ > .../boot/dts/mobileye/eyeq5-fixed-clocks.dtsi | 292 ++++++++++++++++++ > arch/mips/boot/dts/mobileye/eyeq5.dtsi | 134 ++++++++ > arch/mips/configs/generic/board-eyeq5.config | 42 +++ > arch/mips/generic/Kconfig | 15 + > arch/mips/generic/Platform | 2 + > arch/mips/generic/board-epm5.its.S | 24 ++ > arch/mips/include/asm/addrspace.h | 5 + > arch/mips/include/asm/mach-generic/spaces.h | 2 + > arch/mips/include/asm/mips-cm.h | 1 + > arch/mips/include/asm/smp-cps.h | 4 +- > arch/mips/include/asm/traps.h | 1 - > arch/mips/include/asm/uasm.h | 2 + > arch/mips/kernel/cps-vec.S | 110 +++---- > arch/mips/kernel/cpu-probe.c | 5 - > arch/mips/kernel/cpu-r3k-probe.c | 2 - > arch/mips/kernel/genex.S | 19 +- > arch/mips/kernel/head.S | 7 +- > arch/mips/kernel/smp-cps.c | 171 ++++++++-- > arch/mips/kernel/traps.c | 90 ++++-- > arch/mips/mm/uasm.c | 6 +- > 30 files changed, 894 insertions(+), 159 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mips/mobileye.yaml > create mode 100644 arch/mips/boot/dts/mobileye/Makefile > create mode 100644 arch/mips/boot/dts/mobileye/eyeq5-epm5.dts > create mode 100644 arch/mips/boot/dts/mobileye/eyeq5-fixed-clocks.dtsi > create mode 100644 arch/mips/boot/dts/mobileye/eyeq5.dtsi > create mode 100644 arch/mips/configs/generic/board-eyeq5.config > create mode 100644 arch/mips/generic/board-epm5.its.S > > -- > 2.42.0 > -- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com
