Hello,
The EyeQ5 SoC from Mobileye is based on the MIPS I6500 architecture
and features multiple controllers such as the classic UART, I2C, SPI,
as well as CAN-FD, PCIe, Octal/Quad SPI Flash interface, Gigabit
Ethernet, MIPI CSI-2, and eMMC 5.1. It also includes a Hardware
Security Module, Functional Safety Hardware, and MJPEG encoder.
One peculiarity of this SoC is that the physical address of the DDDR
exceeds 32 bits. Given that the architecture is 64 bits, this is not
an issue, but it requires some changes in how the mips64 is currently
managed during boot.
In this fifth version, there aren't many changes, mostly just tweaking
commit messages based on Sergey's feedback and fixing up the code
style. But, the real reason for this series is a bit of a whoopsie on
my end. It turns out, despite what I confidently claimed in the last
round, some configuration tweaks were missing. All sorted now, though!
To build and test the kernel, we need to run the following commands:
make 64r6el_defconfig BOARDS=eyeq5
make vmlinuz.itb
Changelog:
v4 -> v5:
- Improve commit messages for patch 3, 5, 12 and 13.
- Fix style in patch 9
- Really enable SPARSMEM and use correct address in
board-eyeq5.config in patch 21
v3 -> v4:
- Fix build warning in "MIPS: Get rid of CONFIG_NO_EXCEPT_FILL":
check that we are in 64bit mode before using KSEG0 that exist only
in this mode.
- Modify "MIPS: spaces: Define a couple of handy macros" to be
buildable in 32bit mode.
- Use correct format specifier to print address in "MIPS: traps: Give
more explanations if ebase doesn't belong to KSEG0"
- In "MIPS: generic: Add support for Mobileye EyeQ5",remove
CONFIG_ZBOOT_LOAD_ADDRESS from board-eyeq5.config, (as well as
CONFIG_USE_XKPHYS that does not exist anymore) and add
CONFIG_SPARSEMEM_MANUAL to enable SPARSMEM.
v2 -> v3
- Added more reviewed-by and acked-by tags
- Fix sorting for cpus entries in
- Fix indentation issue in Documentation/devicetree/bindings/mips/mobileye.yaml
v1 -> v2
- Added reviewed-by and acked-by tags
- Fix typos reported
- In patch 15 use 'img' vendor string instead of mti
- In patch 16 modify licence
- In patch 17 give more explanations about the block usage.
- In patch 18, remove _ in node names, don't use anymore
CONFIG_BUILTIN_DTB in Makefile, remove macro, modify licence.
- In patch 19 remove most of the bootargs and only keeps earlycon. I
also split the memory in 2 part in the device tree.
- Integrate the series from Jiaxun Yang
https://lore.kernel.org/linux-mips/20231027221106.405666-1-jiaxun.yang@xxxxxxxxxxx/
They are patches 2 to 6 and 8 to 12
Then I added patch 7 to fix the cache issue visible on the Mobileye
platform, I also add patch 13 to improve warning message when ebase
doesn't belong to KSEG0
Regards,
Gregory
Gregory CLEMENT (13):
MIPS: compressed: Use correct instruction for 64 bit code
MIPS: spaces: Define a couple of handy macros
MIPS: Fix cache issue with mips_cps_core_entry
MIPS: traps: Give more explanations if ebase doesn't belong to KSEG0
dt-bindings: Add vendor prefix for Mobileye Vision Technologies Ltd.
dt-bindings: mips: cpus: Sort the entries
dt-bindings: mips: cpu: Add I-Class I6500 Multiprocessor Core
dt-bindings: mips: Add bindings for Mobileye SoCs
dt-bindings: mfd: syscon: Document EyeQ5 OLB
MIPS: mobileye: Add EyeQ5 dtsi
MIPS: mobileye: Add EPM5 device tree
MIPS: generic: Add support for Mobileye EyeQ5
MAINTAINERS: Add entry for Mobileye MIPS SoCs
Jiaxun Yang (9):
MIPS: Export higher/highest relocation functions in uasm
MIPS: genex: Fix except_vec_vi for kernel in XKPHYS
MIPS: Fix set_uncached_handler for ebase in XKPHYS
MIPS: Refactor mips_cps_core_entry implementation
MIPS: Allow kernel base to be set from Kconfig for all platforms
MIPS: traps: Handle CPU with non standard vint offset
MIPS: Avoid unnecessary reservation of exception space
MIPS: traps: Enhance memblock ebase allocation process
MIPS: Get rid of CONFIG_NO_EXCEPT_FILL
.../devicetree/bindings/mfd/syscon.yaml | 1 +
.../devicetree/bindings/mips/cpus.yaml | 13 +-
.../devicetree/bindings/mips/mobileye.yaml | 32 ++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 12 +
arch/mips/Kconfig | 26 +-
arch/mips/boot/compressed/head.S | 4 +-
arch/mips/boot/dts/Makefile | 1 +
arch/mips/boot/dts/mobileye/Makefile | 4 +
arch/mips/boot/dts/mobileye/eyeq5-epm5.dts | 24 ++
.../boot/dts/mobileye/eyeq5-fixed-clocks.dtsi | 292 ++++++++++++++++++
arch/mips/boot/dts/mobileye/eyeq5.dtsi | 134 ++++++++
arch/mips/configs/generic/board-eyeq5.config | 42 +++
arch/mips/generic/Kconfig | 15 +
arch/mips/generic/Platform | 2 +
arch/mips/generic/board-epm5.its.S | 24 ++
arch/mips/include/asm/addrspace.h | 5 +
arch/mips/include/asm/mach-generic/spaces.h | 2 +
arch/mips/include/asm/mips-cm.h | 1 +
arch/mips/include/asm/smp-cps.h | 4 +-
arch/mips/include/asm/traps.h | 1 -
arch/mips/include/asm/uasm.h | 2 +
arch/mips/kernel/cps-vec.S | 110 +++----
arch/mips/kernel/cpu-probe.c | 5 -
arch/mips/kernel/cpu-r3k-probe.c | 2 -
arch/mips/kernel/genex.S | 19 +-
arch/mips/kernel/head.S | 7 +-
arch/mips/kernel/smp-cps.c | 171 ++++++++--
arch/mips/kernel/traps.c | 90 ++++--
arch/mips/mm/uasm.c | 6 +-
30 files changed, 894 insertions(+), 159 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mips/mobileye.yaml
create mode 100644 arch/mips/boot/dts/mobileye/Makefile
create mode 100644 arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
create mode 100644 arch/mips/boot/dts/mobileye/eyeq5-fixed-clocks.dtsi
create mode 100644 arch/mips/boot/dts/mobileye/eyeq5.dtsi
create mode 100644 arch/mips/configs/generic/board-eyeq5.config
create mode 100644 arch/mips/generic/board-epm5.its.S
--
2.42.0
