Hi Keguang On Thu, Sep 14, 2023 at 07:44:32PM +0800, Keguang Zhang wrote: > In order to convert Loongson1 MAC platform devices to the devicetree > nodes, Loongson1 MAC arch-code should be moved to the driver dir. > Add dt-binding document and update MAINTAINERS file accordingly. > > In other words, this patchset is a preparation for converting > Loongson1 platform devices to devicetree. No more comments from my side. Thank you for the patches and especially for the patience in the review process. For the entire series: Reviewed-by: Serge Semin <fancer.lancer@xxxxxxxxx> * I'll also send individual Rb tags to each patch so b4 would be able * to take it into account. -Serge(y) > > Changelog > V4 -> V5: Replace stmmac_probe_config_dt() with devm_stmmac_probe_config_dt() > Replace stmmac_pltfr_probe() with devm_stmmac_pltfr_probe() > Squash patch 4 into patch 2 and 3 > V3 -> V4: Add Acked-by tag from Krzysztof Kozlowski > Add "|" to description part > Amend "phy-mode" property > Drop ls1x_dwmac_syscon definition and its instances > Drop three redundant fields from the ls1x_dwmac structure > Drop the ls1x_dwmac_init() method. > Update the dt-binding document entry of Loongson1 Ethernet > Some minor improvements > V2 -> V3: Split the DT-schema file into loongson,ls1b-gmac.yaml > and loongson,ls1c-emac.yaml (suggested by Serge Semin) > Change the compatibles to loongson,ls1b-gmac and loongson,ls1c-emac > Rename loongson,dwmac-syscon to loongson,ls1-syscon > Amend the title > Add description > Add Reviewed-by tag from Krzysztof Kozlowski > Change compatibles back to loongson,ls1b-syscon > and loongson,ls1c-syscon > Determine the device ID by physical > base address(suggested by Serge Semin) > Use regmap instead of regmap fields > Use syscon_regmap_lookup_by_phandle() > Some minor fixes > Update the entries of MAINTAINERS > V1 -> V2: Leave the Ethernet platform data for now > Make the syscon compatibles more specific > Fix "clock-names" and "interrupt-names" property > Rename the syscon property to "loongson,dwmac-syscon" > Drop "phy-handle" and "phy-mode" requirement > Revert adding loongson,ls1b-dwmac/loongson,ls1c-dwmac > to snps,dwmac.yaml > Fix the build errors due to CONFIG_OF being unset > Change struct reg_field definitions to const > Rename the syscon property to "loongson,dwmac-syscon" > Add MII PHY mode for LS1C > Improve the commit message > > Keguang Zhang (3): > dt-bindings: mfd: syscon: Add compatibles for Loongson-1 syscon > dt-bindings: net: Add Loongson-1 Ethernet Controller > net: stmmac: Add glue layer for Loongson-1 SoC > > .../devicetree/bindings/mfd/syscon.yaml | 2 + > .../bindings/net/loongson,ls1b-gmac.yaml | 114 ++++++++++ > .../bindings/net/loongson,ls1c-emac.yaml | 113 ++++++++++ > MAINTAINERS | 2 + > drivers/net/ethernet/stmicro/stmmac/Kconfig | 11 + > drivers/net/ethernet/stmicro/stmmac/Makefile | 1 + > .../ethernet/stmicro/stmmac/dwmac-loongson1.c | 209 ++++++++++++++++++ > 7 files changed, 452 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml > create mode 100644 Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml > create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c > > > base-commit: 98897dc735cf6635f0966f76eb0108354168fb15 > -- > 2.39.2 > >
