The Kconfig options belongs closer to the corresponding implementations, hence let's move them from the soc subsystem to the pmdomain subsystem. Cc: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx> Cc: Ray Jui <rjui@xxxxxxxxxxxx> Cc: Scott Branden <sbranden@xxxxxxxxxxxx> Cc: <linux-mips@xxxxxxxxxxxxxxx> Cc: <linux-rpi-kernel@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> --- drivers/pmdomain/Kconfig | 1 + drivers/pmdomain/bcm/Kconfig | 46 ++++++++++++++++++++++++++++++++++++ drivers/soc/bcm/Kconfig | 42 -------------------------------- 3 files changed, 47 insertions(+), 42 deletions(-) create mode 100644 drivers/pmdomain/bcm/Kconfig diff --git a/drivers/pmdomain/Kconfig b/drivers/pmdomain/Kconfig index 482d9e970e14..ddc05d6af100 100644 --- a/drivers/pmdomain/Kconfig +++ b/drivers/pmdomain/Kconfig @@ -4,5 +4,6 @@ menu "PM Domains" source "drivers/pmdomain/actions/Kconfig" source "drivers/pmdomain/amlogic/Kconfig" source "drivers/pmdomain/apple/Kconfig" +source "drivers/pmdomain/bcm/Kconfig" endmenu diff --git a/drivers/pmdomain/bcm/Kconfig b/drivers/pmdomain/bcm/Kconfig new file mode 100644 index 000000000000..9311e90b7707 --- /dev/null +++ b/drivers/pmdomain/bcm/Kconfig @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0-only +menu "Broadcom PM Domains" + +config BCM2835_POWER + bool "BCM2835 power domain driver" + depends on ARCH_BCM2835 || (COMPILE_TEST && OF) + default y if ARCH_BCM2835 + select PM_GENERIC_DOMAINS if PM + select RESET_CONTROLLER + help + This enables support for the BCM2835 power domains and reset + controller. Any usage of power domains by the Raspberry Pi + firmware means that Linux usage of the same power domain + must be accessed using the RASPBERRYPI_POWER driver + +config RASPBERRYPI_POWER + bool "Raspberry Pi power domain driver" + depends on ARCH_BCM2835 || (COMPILE_TEST && OF) + depends on RASPBERRYPI_FIRMWARE=y + select PM_GENERIC_DOMAINS if PM + help + This enables support for the RPi power domains which can be enabled + or disabled via the RPi firmware. + +config BCM_PMB + bool "Broadcom PMB (Power Management Bus) driver" + depends on ARCH_BCMBCA || (COMPILE_TEST && OF) + default ARCH_BCMBCA + select PM_GENERIC_DOMAINS if PM + help + This enables support for the Broadcom's PMB (Power Management Bus) that + is used for disabling and enabling SoC devices. + +if SOC_BCM63XX + +config BCM63XX_POWER + bool "BCM63xx power domain driver" + depends on BMIPS_GENERIC || (COMPILE_TEST && OF) + select PM_GENERIC_DOMAINS if PM + help + This enables support for the BCM63xx power domains controller on + BCM6318, BCM6328, BCM6362 and BCM63268 SoCs. + +endif # SOC_BCM63XX + +endmenu diff --git a/drivers/soc/bcm/Kconfig b/drivers/soc/bcm/Kconfig index f96906795fa6..406617aa3056 100644 --- a/drivers/soc/bcm/Kconfig +++ b/drivers/soc/bcm/Kconfig @@ -1,27 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only menu "Broadcom SoC drivers" -config BCM2835_POWER - bool "BCM2835 power domain driver" - depends on ARCH_BCM2835 || (COMPILE_TEST && OF) - default y if ARCH_BCM2835 - select PM_GENERIC_DOMAINS if PM - select RESET_CONTROLLER - help - This enables support for the BCM2835 power domains and reset - controller. Any usage of power domains by the Raspberry Pi - firmware means that Linux usage of the same power domain - must be accessed using the RASPBERRYPI_POWER driver - -config RASPBERRYPI_POWER - bool "Raspberry Pi power domain driver" - depends on ARCH_BCM2835 || (COMPILE_TEST && OF) - depends on RASPBERRYPI_FIRMWARE=y - select PM_GENERIC_DOMAINS if PM - help - This enables support for the RPi power domains which can be enabled - or disabled via the RPi firmware. - config SOC_BCM63XX bool "Broadcom 63xx SoC drivers" depends on BMIPS_GENERIC || COMPILE_TEST @@ -42,27 +21,6 @@ config SOC_BRCMSTB If unsure, say N. -config BCM_PMB - bool "Broadcom PMB (Power Management Bus) driver" - depends on ARCH_BCMBCA || (COMPILE_TEST && OF) - default ARCH_BCMBCA - select PM_GENERIC_DOMAINS if PM - help - This enables support for the Broadcom's PMB (Power Management Bus) that - is used for disabling and enabling SoC devices. - -if SOC_BCM63XX - -config BCM63XX_POWER - bool "BCM63xx power domain driver" - depends on BMIPS_GENERIC || (COMPILE_TEST && OF) - select PM_GENERIC_DOMAINS if PM - help - This enables support for the BCM63xx power domains controller on - BCM6318, BCM6328, BCM6362 and BCM63268 SoCs. - -endif # SOC_BCM63XX - source "drivers/soc/bcm/brcmstb/Kconfig" endmenu -- 2.34.1
