Re: [patch 00/37] cpu/hotplug, x86: Reworked parallel CPU bringup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 20 2023 at 07:51, Sean Christopherson wrote:
> On Thu, Apr 20, 2023, Thomas Gleixner wrote:
>> On Thu, Apr 20 2023 at 10:23, Andrew Cooper wrote:
>> > On 20/04/2023 9:32 am, Thomas Gleixner wrote:
>> > > On Wed, Apr 19, 2023, Andrew Cooper wrote:
>> > > > This was changed in x2APIC, which made the x2APIC_ID immutable.
>>
>> >> I'm pondering to simply deny parallel mode if x2APIC is not there.
>> >
>> > I'm not sure if that will help much.
>> 
>> Spoilsport.
>
> LOL, well let me pile on then.  x2APIC IDs aren't immutable on AMD hardware.  The
> ID is read-only when the CPU is in x2APIC mode, but any changes made to the ID
> while the CPU is in xAPIC mode survive the transition to x2APIC.  From the APM:
>
>   A value previously written by software to the 8-bit APIC_ID register (MMIO offset
>   30h) is converted by hardware into the appropriate format and reflected into the
>   32-bit x2APIC_ID register (MSR 802h).
>
> FWIW, my observations from testing on bare metal are that the xAPIC ID is effectively
> read-only (writes are dropped) on Intel CPUs as far back as Haswell, while the above
> behavior described in the APM holds true on at least Rome and Milan.
>
> My guess is that Intel's uArch specific behavior of the xAPIC ID being read-only
> was introduced when x2APIC came along, but I didn't test farther back than Haswell.

I'm not so worried about modern hardware. The horrorshow is the old muck
as demonstrated and of course there is virt :)

Something like the completely untested below should just work whatever
APIC ID the BIOS decided to dice.

That might just work on SEV too without that GHCB muck, but what do I
know.

Thanks,

        tglx
---
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -138,7 +138,8 @@
 #define		APIC_EILVT_MASKED	(1 << 16)
 
 #define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
-#define APIC_BASE_MSR	0x800
+#define APIC_BASE_MSR		0x800
+#define APIC_X2APIC_ID_MSR	0x802
 #define XAPIC_ENABLE	(1UL << 11)
 #define X2APIC_ENABLE	(1UL << 10)
 
@@ -162,6 +163,7 @@
 #define APIC_CPUID(apicid)	((apicid) & XAPIC_DEST_CPUS_MASK)
 #define NUM_APIC_CLUSTERS	((BAD_APICID + 1) >> XAPIC_DEST_CPUS_SHIFT)
 
+#ifndef __ASSEMBLY__
 /*
  * the local APIC register structure, memory mapped. Not terribly well
  * tested, but we might eventually use this one in the future - the
@@ -435,4 +437,5 @@ enum apic_delivery_modes {
 	APIC_DELIVERY_MODE_EXTINT	= 7,
 };
 
+#endif /* !__ASSEMBLY__ */
 #endif /* _ASM_X86_APICDEF_H */
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -195,14 +195,13 @@ extern void nmi_selftest(void);
 #endif
 
 extern unsigned int smpboot_control;
+extern unsigned long apic_mmio_base;
 
 #endif /* !__ASSEMBLY__ */
 
 /* Control bits for startup_64 */
-#define STARTUP_APICID_CPUID_1F 0x80000000
-#define STARTUP_APICID_CPUID_0B 0x40000000
-#define STARTUP_APICID_CPUID_01 0x20000000
-#define STARTUP_APICID_SEV_ES	0x10000000
+#define STARTUP_READ_APICID	0x80000000
+#define STARTUP_APICID_SEV_ES	0x40000000
 
 /* Top 8 bits are reserved for control */
 #define STARTUP_PARALLEL_MASK	0xFF000000
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -101,6 +101,8 @@ static int apic_extnmi __ro_after_init =
  */
 static bool virt_ext_dest_id __ro_after_init;
 
+unsigned long apic_mmio_base __ro_after_init;
+
 /*
  * Map cpu index to physical APIC ID
  */
@@ -2164,6 +2166,7 @@ void __init register_lapic_address(unsig
 
 	if (!x2apic_mode) {
 		set_fixmap_nocache(FIX_APIC_BASE, address);
+		apic_mmio_base = APIC_BASE;
 		apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
 			    APIC_BASE, address);
 	}
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -24,8 +24,10 @@
 #include "../entry/calling.h"
 #include <asm/export.h>
 #include <asm/nospec-branch.h>
+#include <asm/apicdef.h>
 #include <asm/fixmap.h>
 #include <asm/smp.h>
+
 #include <asm/sev-common.h>
 
 /*
@@ -237,37 +239,24 @@ SYM_INNER_LABEL(secondary_startup_64_no_
 
 #ifdef CONFIG_SMP
 	/*
-	 * For parallel boot, the APIC ID is retrieved from CPUID, and then
-	 * used to look up the CPU number.  For booting a single CPU, the
-	 * CPU number is encoded in smpboot_control.
+	 * For parallel boot, the APIC ID is either retrieved the APIC or
+	 * from CPUID, and then used to look up the CPU number.
+	 * For booting a single CPU, the CPU number is encoded in
+	 * smpboot_control.
 	 *
-	 * Bit 31	STARTUP_APICID_CPUID_1F flag (use CPUID 0x1f)
-	 * Bit 30	STARTUP_APICID_CPUID_0B flag (use CPUID 0x0b)
-	 * Bit 29	STARTUP_APICID_CPUID_01 flag (use CPUID 0x01)
-	 * Bit 28	STARTUP_APICID_SEV_ES flag (CPUID 0x0b via GHCB MSR)
+	 * Bit 31	STARTUP_APICID_READ (Read APICID from APIC)
+	 * Bit 30	STARTUP_APICID_SEV_ES flag (CPUID 0x0b via GHCB MSR)
 	 * Bit 0-23	CPU# if STARTUP_APICID_CPUID_xx flags are not set
 	 */
 	movl	smpboot_control(%rip), %ecx
+	testl	$STARTUP_READ_APICID, %ecx
 #ifdef CONFIG_AMD_MEM_ENCRYPT
 	testl	$STARTUP_APICID_SEV_ES, %ecx
 	jnz	.Luse_sev_cpuid_0b
 #endif
-	testl	$STARTUP_APICID_CPUID_1F, %ecx
-	jnz	.Luse_cpuid_1f
-	testl	$STARTUP_APICID_CPUID_0B, %ecx
-	jnz	.Luse_cpuid_0b
-	testl	$STARTUP_APICID_CPUID_01, %ecx
-	jnz	.Luse_cpuid_01
 	andl	$(~STARTUP_PARALLEL_MASK), %ecx
 	jmp	.Lsetup_cpu
 
-.Luse_cpuid_01:
-	mov	$0x01, %eax
-	cpuid
-	mov	%ebx, %edx
-	shr	$24, %edx
-	jmp	.Lsetup_AP
-
 #ifdef CONFIG_AMD_MEM_ENCRYPT
 .Luse_sev_cpuid_0b:
 	/* Set the GHCB MSR to request CPUID 0x0B_EDX */
@@ -292,24 +281,30 @@ SYM_INNER_LABEL(secondary_startup_64_no_
 	jmp	.Lsetup_AP
 #endif
 
-.Luse_cpuid_0b:
-	mov	$0x0B, %eax
-	xorl	%ecx, %ecx
-	cpuid
-	jmp	.Lsetup_AP
+.Lread_apicid:
+	mov	$MSR_IA32_APICBASE, %ecx
+	rdmsr
+	testl	$X2APIC_ENABLE, %eax
+	jnz	read_apicid_msr
+
+	/* Read the APIC ID from the fix-mapped MMIO space. */
+	movq	apic_mmio_base(%rip), %rcx
+	addq	$APIC_ID, %rcx
+	movl	(%rcx), %eax
+	shr	$24, %eax
+	jnz	.Lread_apicid
 
-.Luse_cpuid_1f:
-	mov	$0x1f, %eax
-	xorl	%ecx, %ecx
-	cpuid
+.Lread_apicid_msr:
+	mov	$APIC_X2APIC_ID_MSR, %ecx
+	rdmsr
 
 .Lsetup_AP:
-	/* EDX contains the APIC ID of the current CPU */
+	/* EAX contains the APIC ID of the current CPU */
 	xorq	%rcx, %rcx
 	leaq	cpuid_to_apicid(%rip), %rbx
 
 .Lfind_cpunr:
-	cmpl	(%rbx,%rcx,4), %edx
+	cmpl	(%rbx,%rcx,4), %eax
 	jz	.Lsetup_cpu
 	inc	%ecx
 #ifdef CONFIG_FORCE_NR_CPUS
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1253,41 +1253,22 @@ bool __init arch_cpuhp_init_parallel_bri
 		return false;
 	}
 
-	/* Encrypted guests require special CPUID handling. */
+	/* Encrypted guests require special handling. */
 	if (cc_platform_has(CC_ATTR_GUEST_STATE_ENCRYPT)) {
 		switch (cc_get_vendor()) {
 		case CC_VENDOR_AMD:
 			ctrl = STARTUP_APICID_SEV_ES;
 			if (topology_extended_leaf == 0x0b)
-				goto setup;
+				break;
 			fallthrough;
 		default:
 			pr_info("Parallel CPU startup disabled due to guest state encryption\n");
 			return false;
 		}
+	} else {
+		ctrl = STARTUP_READ_APICID;
 	}
 
-	switch (topology_extended_leaf) {
-	case 0x0b:
-		ctrl = STARTUP_APICID_CPUID_0B;
-		break;
-	case 0x1f:
-		ctrl = STARTUP_APICID_CPUID_1F;
-		break;
-	case 0x00:
-		/* For !x2APIC mode 8 bits from leaf 0x01 are sufficient. */
-		if (!x2apic_mode) {
-			ctrl = STARTUP_APICID_CPUID_01;
-			break;
-		}
-		fallthrough;
-	default:
-		pr_info("Parallel CPU startup disabled. Unsupported topology leaf %u\n",
-			topology_extended_leaf);
-		return false;
-	}
-
-setup:
 	pr_debug("Parallel CPU startup enabled: 0x%08x\n", ctrl);
 	smpboot_control = ctrl;
 	return true;



[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux