Re: [PATCH 1/2] Mips: ls2k1000: dts: add the display controller device node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23/02/2023 04:19, Sui jingfeng wrote:
> Hi,
> 
> On 2023/2/23 02:32, Krzysztof Kozlowski wrote:
>> On 22/02/2023 17:55, suijingfeng wrote:
>>> The display controller is a pci device, it's pci vendor id is
>>> 0x0014, it's pci device id is 0x7a06.
>>>
>>> Signed-off-by: suijingfeng <suijingfeng@xxxxxxxxxxx>
>>> ---
>>>   .../boot/dts/loongson/loongson64-2k1000.dtsi  | 21 +++++++++++++++++++
>>>   1 file changed, 21 insertions(+)
>>>
>>> diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
>>> index 8143a61111e3..a528af3977d9 100644
>>> --- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
>>> +++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
>>> @@ -31,6 +31,18 @@ memory@200000 {
>>>   			<0x00000001 0x10000000 0x00000001 0xb0000000>; /* 6912 MB at 4352MB */
>>>   	};
>>>   
>>> +	reserved-memory {
>>> +		#address-cells = <2>;
>>> +		#size-cells = <2>;
>>> +		ranges;
>>> +
>>> +		display_reserved: framebuffer@30000000 {
>>> +			compatible = "shared-dma-pool";
>>> +			reg = <0x0 0x30000000 0x0 0x04000000>; /* 64M */
>>> +			linux,cma-default;
>>> +		};
>>> +	};
>>> +
>>>   	cpu_clk: cpu_clk {
>>>   		#clock-cells = <0>;
>>>   		compatible = "fixed-clock";
>>> @@ -198,6 +210,15 @@ sata@8,0 {
>>>   				interrupt-parent = <&liointc0>;
>>>   			};
>>>   
>>> +			display-controller@6,0 {
>>> +				compatible = "loongson,ls2k1000-dc";
>>> +
>>> +				reg = <0x3000 0x0 0x0 0x0 0x0>;
>>> +				interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
>>> +				interrupt-parent = <&liointc0>;
>>> +				memory-region = <&display_reserved>;
>> NAK.
> Err :(,  please give me a chance to explain
>> Test your code against the bindings you send.
> 
> I can guarantee to you that I test may code more than twice. The code 
> used to testing is listed at link [1].

I wrote - test against the bindings. I don't believe that it was tested.
Please paste the output of the testing (dtbs_check).

> 
> This patchset  mainly used to illustrate how  we made the driver in [1] 
> usable on our SoC platform.
> 
>> It's the same
>> patchset. You basically send something which the same moment is incorrect.
> 
> Loongson display controller IP has been integrated in both Loongson
> North Bridge chipset(ls7a1000 and ls7a2000) and Loongson SoCs(ls2k1000
> and ls2k2000 etc), it even has been included in Loongson BMC(ls2k0500 bmc)
> products.

I don't understand how your reply here is relevant to incorrect bindings
or incorrect DTS according to bindings.


Best regards,
Krzysztof




[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux