Re: [PATCH 3/3] SPI: Ingenic: Add SFC support for Ingenic SoCs.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Krzysztof,

On 2022/7/23 上午2:07, Krzysztof Kozlowski wrote:
On 22/07/2022 18:48, 周琰杰 (Zhou Yanjie) wrote:
Add SFC support for the X1000 SoC, the X1600 SoC, and the X2000 SoC
from Ingenic.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx>
---
  drivers/spi/Kconfig           |   9 +
  drivers/spi/Makefile          |   1 +
  drivers/spi/spi-ingenic-sfc.c | 662 ++++++++++++++++++++++++++++++++++++++++++
  3 files changed, 672 insertions(+)
  create mode 100644 drivers/spi/spi-ingenic-sfc.c

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 3b1044e..1077bd3 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -437,6 +437,15 @@ config SPI_INGENIC
  	  To compile this driver as a module, choose M here: the module
  	  will be called spi-ingenic.
+config SPI_INGENIC_SFC
+	tristate "Ingenic SoCs SPI Flash Controller"
+	depends on MACH_INGENIC || COMPILE_TEST
+	help
+	  This enables support for the Ingenic SoCs SPI flash controller.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ingenic-sfc.
+
  config SPI_INTEL
  	tristate
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 0f44eb6..f3e42c0 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_SPI_HISI_SFC_V3XX)		+= spi-hisi-sfc-v3xx.o
  obj-$(CONFIG_SPI_IMG_SPFI)		+= spi-img-spfi.o
  obj-$(CONFIG_SPI_IMX)			+= spi-imx.o
  obj-$(CONFIG_SPI_INGENIC)		+= spi-ingenic.o
+obj-$(CONFIG_SPI_INGENIC_SFC)	+= spi-ingenic-sfc.o
  obj-$(CONFIG_SPI_INTEL)			+= spi-intel.o
  obj-$(CONFIG_SPI_INTEL_PCI)		+= spi-intel-pci.o
  obj-$(CONFIG_SPI_INTEL_PLATFORM)	+= spi-intel-platform.o
diff --git a/drivers/spi/spi-ingenic-sfc.c b/drivers/spi/spi-ingenic-sfc.c
new file mode 100644
index 00000000..a565546
--- /dev/null
+++ b/drivers/spi/spi-ingenic-sfc.c
@@ -0,0 +1,662 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Ingenic SoCs SPI Flash Controller Driver
+ * Copyright (c) 2022 周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+
+/* SFC register offsets */
+#define SFC_REG_GLB						0x0000
+#define SFC_REG_DEV_CONF				0x0004
+#define SFC_REG_DEV_STA_EXP				0x0008
+#define SFC_REG_DEV_STA_RT				0x000c
+#define SFC_REG_DEV_STA_MSK				0x0010
+#define SFC_REG_TRAN_CONF(n)			(0x0014 + n * 4)
+#define SFC_REG_TRAN_CFG0(n)			(0x0014 + n * 4)
+#define SFC_REG_TRAN_LEN				0x002c
+#define SFC_REG_DEV_ADDR(n)				(0x0030 + n * 4)
+#define SFC_REG_DEV_ADDR_PLUS(n)		(0x0048 + n * 4)
+#define SFC_REG_MEM_ADDR				0x0060
+#define SFC_REG_TRIG					0x0064
+#define SFC_REG_SR						0x0068
+#define SFC_REG_SCR						0x006c
+#define SFC_REG_INTC					0x0070
+#define SFC_REG_FSM						0x0074
+#define SFC_REG_CGE						0x0078
+#define SFC_REG_TRAN_CFG1(n)			(0x009c + n * 4)
+#define SFC_REG_DR						0x1000
+
+/* bits within the GLB register */
+#define GLB_TRAN_DIR_MASK				GENMASK(13, 13)
+#define GLB_TRAN_DIR_WRITE				0x1
+#define GLB_TRAN_DIR_READ				0x0
+#define GLB_THRESHOLD_MASK				GENMASK(12, 7)
+#define GLB_OP_MODE_MASK				GENMASK(6, 6)
+#define GLB_OP_MODE_DMA					0x1
+#define GLB_OP_MODE_SLAVE				0x0
+#define GLB_PHASE_NUM_MASK				GENMASK(5, 3)
+#define GLB_WP_EN						BIT(2)
+#define GLB_BURST_MD_MASK				GENMASK(1, 0)
+#define GLB_BURST_MD_INCR32				0x3
+#define GLB_BURST_MD_INCR16				0x2
+#define GLB_BURST_MD_INCR8				0x1
+#define GLB_BURST_MD_INCR4				0x0
+
+/* bits within the DEV_CONF register */
+#define DEV_CONF_SMP_DELAY_MASK			GENMASK(20, 16)
+#define DEV_CONF_SMP_DELAY_180DEG		0x4
+#define DEV_CONF_SMP_DELAY_HALF_CYCLE	0x1
+#define DEV_CONF_CMD_TYPE_MASK			GENMASK(15, 15)
+#define DEV_CONF_CMD_TYPE_16BIT			0x1
+#define DEV_CONF_CMD_TYPE_8BIT			0x0
+#define DEV_CONF_STA_TYPE_MASK			GENMASK(14, 13)
+#define DEV_CONF_THOLD_MASK				GENMASK(12, 11)
+#define DEV_CONF_TSETUP_MASK			GENMASK(10, 9)
+#define DEV_CONF_TSH_MASK				GENMASK(8, 5)
+#define DEV_CONF_CPHA					BIT(4)
+#define DEV_CONF_CPOL					BIT(3)
+#define DEV_CONF_CE_DL					BIT(2)
+#define DEV_CONF_HOLD_DL				BIT(1)
+#define DEV_CONF_WP_DL					BIT(0)
+
+/* bits within the TRAN_CONF(n) register */
+#define TRAN_CONF_TRAN_MODE_MASK		GENMASK(31, 29)
+#define TRAN_CONF_ADDR_WIDTH_MASK		GENMASK(28, 26)
+#define TRAN_CONF_POLL_EN				BIT(25)
+#define TRAN_CONF_CMD_EN				BIT(24)
+#define TRAN_CONF_PHASE_FORMAT_MASK		GENMASK(23, 23)
+#define TRAN_CONF_DMY_BITS_MASK			GENMASK(22, 17)
+#define TRAN_CONF_DATA_EN				BIT(16)
+#define TRAN_CONF_CMD_MASK				GENMASK(15, 0)
+
+/* bits within the TRIG register */
+#define TRIG_FLUSH						BIT(2)
+#define TRIG_STOP						BIT(1)
+#define TRIG_START						BIT(0)
+
+/* bits within the SR register */
+#define SR_FIFO_NUM_MASK				GENMASK(22, 16)
+#define SR_END							BIT(4)
+#define SR_TRAN_REQ						BIT(3)
+#define SR_RECE_REQ						BIT(2)
+#define SR_OVER							BIT(1)
+#define SR_UNDER						BIT(0)
+
+/* bits within the SCR register */
+#define SCR_CLR_END						BIT(4)
+#define SCR_CLR_TREQ					BIT(3)
+#define SCR_CLR_RREQ					BIT(2)
+#define SCR_CLR_OVER					BIT(1)
+#define SCR_CLR_UNDER					BIT(0)
+
+/* bits within the INTC register */
+#define INTC_MASK_END					BIT(4)
+#define INTC_MASK_TREQ					BIT(3)
+#define INTC_MASK_RREQ					BIT(2)
+#define INTC_MASK_OVER					BIT(1)
+#define INTC_MASK_UNDER					BIT(0)
+
+/* bits within the TRAN_CFG1(n) register */
+#define TRAN_CFG1_TRAN_MODE_MASK		GENMASK(7, 4)
+
+#define TRAN_MODE_STANDARD				0
+#define TRAN_MODE_DUAL_DATA				1
+#define TRAN_MODE_DUAL_IO				2
+#define TRAN_MODE_DUAL_FULL				3
+#define TRAN_MODE_QUAD_DATA				5
+#define TRAN_MODE_QUAD_IO				6
+#define TRAN_MODE_QUAD_FULL				7
+#define TRAN_MODE_OCTAL_DATA			9
+#define TRAN_MODE_OCTAL_IO				10
+#define TRAN_MODE_OCTAL_FULL			11
+
+#define INGENIC_SFC_FIFO_SIZE			(64 * 4)
+
+#define INGENIC_SFC_TRANSFER_TIMEOUT	1000
+
+enum ingenic_sfc_version {
+	ID_X1000,
+	ID_X1600,
+	ID_X2000,
+};
+
+struct ingenic_soc_info {
+	enum ingenic_sfc_version version;
+
No need for blank line.

+	unsigned int max_bus_width;
+
Remove as well.

+	const u32 tran_mode_mask;
+};
+
+struct ingenic_sfc {
+	const struct ingenic_soc_info *soc_info;
+
+	void __iomem *base;
+	struct device *dev;
+	struct clk *clk;
+	int irq;
+
+	struct completion completion;
+};
+
+static irqreturn_t ingenic_sfc_irq_handler(int irq, void *data)
+{
+	struct ingenic_sfc *sfc = data;
+
+	writel(0x1f, sfc->base + SFC_REG_INTC);
+
+	complete(&sfc->completion);
+
+	return IRQ_HANDLED;
+}
+
+static int ingenic_sfc_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
+{
+	uintptr_t addr = (uintptr_t)op->data.buf.in;
+
+	if (op->data.nbytes > INGENIC_SFC_FIFO_SIZE && !IS_ALIGNED(addr, 4))
+		op->data.nbytes = INGENIC_SFC_FIFO_SIZE;
+
+	return 0;
+}
+
+static bool ingenic_sfc_supports_op(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+	struct spi_device *spi = mem->spi;
+	struct ingenic_sfc *sfc = spi_controller_get_devdata(spi->master);
+	uintptr_t addr = (uintptr_t)op->data.buf.in;
+
+	/* The controller only supports Standard SPI mode, Duall mode, Quad mode and Octal mode. */
+	if (op->cmd.buswidth > sfc->soc_info->max_bus_width ||
+		op->addr.buswidth > sfc->soc_info->max_bus_width ||
+		op->dummy.buswidth > sfc->soc_info->max_bus_width ||
+		op->data.buswidth > sfc->soc_info->max_bus_width)
+		return false;
+
+	/* Max 32 dummy clock cycles supported */
+	if (op->dummy.nbytes && op->dummy.nbytes * 8 / op->dummy.buswidth > 32)
+		return false;
+
+	/* Max rx data length, check controller limits and alignment */
+	if (op->data.dir == SPI_MEM_DATA_IN &&
+		op->data.nbytes > INGENIC_SFC_FIFO_SIZE && !IS_ALIGNED(addr, 4))
+		return false;
+
+	/* Max 6 bytes address width supported */
+	if (op->addr.nbytes > 6)
+		return false;
+
+	return spi_mem_default_supports_op(mem, op);
+}
+
+static void ingenic_sfc_set_transfer_mode(struct ingenic_sfc *sfc, const struct spi_mem_op *op)
+{
+	int val;
+
+	val = readl(sfc->base + (sfc->soc_info->version >= ID_X1600 ?
+			SFC_REG_TRAN_CFG1(0) : SFC_REG_TRAN_CONF(0)));
This is no really readable.


Sure, I will change it in the next version.


+	val &= ~sfc->soc_info->tran_mode_mask;
+	if (op->cmd.buswidth == 8)
+		val |= (TRAN_MODE_OCTAL_FULL << (ffs(sfc->soc_info->tran_mode_mask) - 1)) &
+				sfc->soc_info->tran_mode_mask;
+	else if (op->cmd.buswidth == 4)
+		val |= (TRAN_MODE_QUAD_FULL << (ffs(sfc->soc_info->tran_mode_mask) - 1)) &
+				sfc->soc_info->tran_mode_mask;
+	else if (op->cmd.buswidth == 2)
+		val |= (TRAN_MODE_DUAL_FULL << (ffs(sfc->soc_info->tran_mode_mask) - 1)) &
+				sfc->soc_info->tran_mode_mask;
+	else if (op->addr.buswidth == 8)
+		val |= (TRAN_MODE_OCTAL_IO << (ffs(sfc->soc_info->tran_mode_mask) - 1)) &
+				sfc->soc_info->tran_mode_mask;
+	else if (op->addr.buswidth == 4)
+		val |= (TRAN_MODE_QUAD_IO << (ffs(sfc->soc_info->tran_mode_mask) - 1)) &
+				sfc->soc_info->tran_mode_mask;
+	else if (op->addr.buswidth == 2)
+		val |= (TRAN_MODE_DUAL_IO << (ffs(sfc->soc_info->tran_mode_mask) - 1)) &
+				sfc->soc_info->tran_mode_mask;
+	else if (op->data.buswidth == 8)
+		val |= (TRAN_MODE_OCTAL_DATA << (ffs(sfc->soc_info->tran_mode_mask) - 1)) &
+				sfc->soc_info->tran_mode_mask;
+	else if (op->data.buswidth == 4)
+		val |= (TRAN_MODE_QUAD_DATA << (ffs(sfc->soc_info->tran_mode_mask) - 1)) &
+				sfc->soc_info->tran_mode_mask;
+	else if (op->data.buswidth == 2)
+		val |= (TRAN_MODE_DUAL_DATA << (ffs(sfc->soc_info->tran_mode_mask) - 1)) &
+				sfc->soc_info->tran_mode_mask;
+	else
+		val |= (TRAN_MODE_STANDARD << (ffs(sfc->soc_info->tran_mode_mask) - 1)) &
+				sfc->soc_info->tran_mode_mask;
+	writel(val, sfc->base + (sfc->soc_info->version >= ID_X1600 ?
+			SFC_REG_TRAN_CFG1(0) : SFC_REG_TRAN_CONF(0)));
Not readable.


Will change it.



+}
+
+/*
+ * We only need PIO mode to handle the SPI_MEM_NO_DATA transfers,
+ * and the unaligned accesses in SPI_MEM_DATA_IN transfers.
+ */
(...)

+	sfc->dev = &pdev->dev;
+
+	platform_set_drvdata(pdev, sfc);
+
+	ret = devm_request_irq(&pdev->dev, sfc->irq, ingenic_sfc_irq_handler, 0,
+			dev_name(&pdev->dev), sfc);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request irq%d, ret = %d\n", sfc->irq, ret);
+		goto err_put_master;
+	}
+
+	ctlr->bus_num = -1;
+	ctlr->num_chipselect = 1;
+	ctlr->mem_ops = &ingenic_sfc_mem_ops;
+	ctlr->dev.of_node = pdev->dev.of_node;
+	ctlr->setup = ingenic_sfc_setup;
+	ctlr->mode_bits = SPI_CPHA | SPI_CPOL |
+			SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_DUAL | SPI_TX_QUAD;
+	if (sfc->soc_info->version >= ID_X2000)
+		ctlr->mode_bits |= SPI_RX_OCTAL | SPI_TX_OCTAL;
+
+	ret = devm_spi_register_controller(&pdev->dev, ctlr);
+	if (ret)
+		goto err_put_master;
+
+	return 0;
+
+err_put_master:
+	spi_master_put(ctlr);
What about unpreparing clocks? Is it part of spi_master_put()?


Will add it in the next version.


Thanks and beset regards!


+
+	return ret;
+}
+
+static const struct ingenic_soc_info x1000_soc_info = {
+	.version = ID_X1000,
+
No need for blank lines after each field.


Best regards,
Krzysztof



[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux