Re: [PATCH v3 02/10] pinctrl: Ingenic: Add support for read the pin configuration of X1830.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 2021/3/23 上午1:58, Paul Cercueil wrote:


Le mer. 17 mars 2021 à 17:57, 周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx> a écrit :
Add X1830 support in "ingenic_pinconf_get()", so that it can read the
configuration of X1830 SoC correctly.

Fixes: d7da2a1e4e08 ("pinctrl: Ingenic: Add pinctrl driver for X1830.")

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx>
---

Notes:
    v2:
    New patch.

    v2->v3:
    1.Add fixes tag.
    2.Adjust the code, simplify the ingenic_pinconf_get() function.

 drivers/pinctrl/pinctrl-ingenic.c | 38 ++++++++++++++++++++++++++++++--------
 1 file changed, 30 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 05dfa0a..1d43b98 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -2109,26 +2109,48 @@ static int ingenic_pinconf_get(struct pinctrl_dev *pctldev,
     enum pin_config_param param = pinconf_to_config_param(*config);
     unsigned int idx = pin % PINS_PER_GPIO_CHIP;
     unsigned int offt = pin / PINS_PER_GPIO_CHIP;
-    bool pull;
+    unsigned int bias;
+    bool pull, pullup, pulldown;

-    if (jzpc->info->version >= ID_JZ4770)
-        pull = !ingenic_get_pin_config(jzpc, pin, JZ4770_GPIO_PEN);
-    else
-        pull = !ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_PULL_DIS);
+    if (jzpc->info->version >= ID_X1830) {
+        unsigned int half = PINS_PER_GPIO_CHIP / 2;
+        unsigned int idxh = pin % half * 2;

I had to look up operator precedence in C, '*' and '%' have the same priority so this reads left-to-right.

I'd suggest adding parentheses around the '%' to make it more obvious.


Sure.


With that:

Reviewed-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>

Cheers,
-Paul

+
+        if (idx < half)
+            regmap_read(jzpc->map, offt * jzpc->info->reg_offset +
+                    X1830_GPIO_PEL, &bias);
+        else
+            regmap_read(jzpc->map, offt * jzpc->info->reg_offset +
+                    X1830_GPIO_PEH, &bias);
+
+        bias = (bias >> idxh) & (GPIO_PULL_UP | GPIO_PULL_DOWN);
+
+        pullup = (bias == GPIO_PULL_UP) && (jzpc->info->pull_ups[offt] & BIT(idx)); +        pulldown = (bias == GPIO_PULL_DOWN) && (jzpc->info->pull_downs[offt] & BIT(idx));
+
+    } else {
+        if (jzpc->info->version >= ID_JZ4770)
+            pull = !ingenic_get_pin_config(jzpc, pin, JZ4770_GPIO_PEN);
+        else
+            pull = !ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_PULL_DIS);
+
+        pullup = pull && (jzpc->info->pull_ups[offt] & BIT(idx));
+        pulldown = pull && (jzpc->info->pull_downs[offt] & BIT(idx));
+    }

     switch (param) {
     case PIN_CONFIG_BIAS_DISABLE:
-        if (pull)
+        if (pullup || pulldown)
             return -EINVAL;
         break;

     case PIN_CONFIG_BIAS_PULL_UP:
-        if (!pull || !(jzpc->info->pull_ups[offt] & BIT(idx)))
+        if (!pullup)
             return -EINVAL;
         break;

     case PIN_CONFIG_BIAS_PULL_DOWN:
-        if (!pull || !(jzpc->info->pull_downs[offt] & BIT(idx)))
+        if (!pulldown)
             return -EINVAL;
         break;

--
2.7.4





[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux