Moikka!
On 02/03/2016 08:17 PM, Russel Winder wrote:
I am fairly sure I didn't see this before, but then I am not sure I
have a new kernel, libdvbv5 or dvbtools. Also people are bad witnesses.
However, if I plug the device in I can either scan with it or tune it,
but only once thereafter it goes into "won't do anything so there"
mode. For example:
|> dvbv5-zap -c save_channels.conf "BBC NEWS"
using demux '/dev/dvb/adapter0/demux0'
reading channels from file 'save_channels.conf'
service has pid type 05: 7270
tuning to 490000000 Hz
video pid 501
dvb_set_pesfilter 501
audio pid 502
dvb_set_pesfilter 502
(0x00)
Lock (0x1f) Signal= -51.00dBm C/N= 23.50dB
582 anglides:~/Repositories/Git/Git/Me-TV (git:master)
|> dvbv5-zap -c save_channels.conf "BBC NEWS"
using demux '/dev/dvb/adapter0/demux0'
reading channels from file 'save_channels.conf'
service has pid type 05: 7270
tuning to 490000000 Hz
video pid 501
dvb_set_pesfilter 501
audio pid 502
dvb_set_pesfilter 502
(0x00) C/N= 23.50dB
(0x00) Signal= -67.00dBm C/N= 23.50dB
(0x00) Signal= -67.00dBm C/N= 23.50dB
(0x00) Signal= -109.00dBm C/N= 23.50dB
(0x00) Signal= -109.00dBm C/N= 23.50dB
(0x00) Signal= -109.00dBm C/N= 23.50dB
(0x00) Signal= -109.00dBm C/N= 23.50dB
(0x00) Signal= -109.00dBm C/N= 23.50dB
(0x00) Signal= -109.00dBm C/N= 23.50dB
(0x00) Signal= -109.00dBm C/N= 23.50dB
(0x00) Signal= -109.00dBm C/N= 23.50dB
If I use a PCTV 282e this does not happen. As far as I can tell there
has been no change of firmware either, and yet…
Are you using DVB-T, T2 or C? I quickly tested T and T2 with dvbv5-zap
and it worked (kernel media 4.5.0-rc1+).
PCTV 282e seems to be dibcom based DVB-T only device, so you are using
DVB-T?
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
