I am fairly sure I didn't see this before, but then I am not sure I have a new kernel, libdvbv5 or dvbtools. Also people are bad witnesses. However, if I plug the device in I can either scan with it or tune it, but only once thereafter it goes into "won't do anything so there" mode. For example: |> dvbv5-zap -c save_channels.conf "BBC NEWS" using demux '/dev/dvb/adapter0/demux0' reading channels from file 'save_channels.conf' service has pid type 05: 7270 tuning to 490000000 Hz video pid 501 dvb_set_pesfilter 501 audio pid 502 dvb_set_pesfilter 502 (0x00) Lock (0x1f) Signal= -51.00dBm C/N= 23.50dB 582 anglides:~/Repositories/Git/Git/Me-TV (git:master) |> dvbv5-zap -c save_channels.conf "BBC NEWS" using demux '/dev/dvb/adapter0/demux0' reading channels from file 'save_channels.conf' service has pid type 05: 7270 tuning to 490000000 Hz video pid 501 dvb_set_pesfilter 501 audio pid 502 dvb_set_pesfilter 502 (0x00) C/N= 23.50dB (0x00) Signal= -67.00dBm C/N= 23.50dB (0x00) Signal= -67.00dBm C/N= 23.50dB (0x00) Signal= -109.00dBm C/N= 23.50dB (0x00) Signal= -109.00dBm C/N= 23.50dB (0x00) Signal= -109.00dBm C/N= 23.50dB (0x00) Signal= -109.00dBm C/N= 23.50dB (0x00) Signal= -109.00dBm C/N= 23.50dB (0x00) Signal= -109.00dBm C/N= 23.50dB (0x00) Signal= -109.00dBm C/N= 23.50dB (0x00) Signal= -109.00dBm C/N= 23.50dB If I use a PCTV 282e this does not happen. As far as I can tell there has been no change of firmware either, and yet… -- Russel. ============================================================================== Dr Russel Winder Director It'z Interactive Ltd t: +44 20 7585 2200 voip: sip:russel.winder@xxxxxxxxx 41 Buckmaster Road m: +44 7770 465 077 xmpp: russel@xxxxxxxxxxxxx London SW11 1EN, UK w: www.itzinteractive.com skype: russel_winder
Attachment:
signature.asc
Description: This is a digitally signed message part
