Hi Mauro, On Monday 25 January 2016 14:44:56 Mauro Carvalho Chehab wrote: > changeset 460b6c0831cb ("tvp5150: Add s_stream subdev operation > support") broke for em28xx-based devices with uses tvp5150. On those > devices, touching the TVP5150_MISC_CTL register causes em28xx to stop > streaming. > > I suspect that it uses the 27 MHz clock provided by tvp5150 to feed > em28xx. So, change the logic to do nothing on s_stream if the tvp5150 is > not set up to work with V4L2_MBUS_PARALLEL. > > Cc: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx> > Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx> > --- > drivers/media/i2c/tvp5150.c | 9 ++++----- > 1 file changed, 4 insertions(+), 5 deletions(-) > > diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c > index 437f1a7ecb96..779c6f453cc9 100644 > --- a/drivers/media/i2c/tvp5150.c > +++ b/drivers/media/i2c/tvp5150.c > @@ -975,19 +975,18 @@ static int tvp5150_g_mbus_config(struct v4l2_subdev > *sd, static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable) > { > struct tvp5150 *decoder = to_tvp5150(sd); > - /* Output format: 8-bit ITU-R BT.656 with embedded syncs */ > - int val = 0x09; > > /* Output format: 8-bit 4:2:2 YUV with discrete sync */ > - if (decoder->mbus_type == V4L2_MBUS_PARALLEL) > - val = 0x0d; > + if (decoder->mbus_type != V4L2_MBUS_PARALLEL) > + return 0; This will break TVP5151 operation with the OMAP3 ISP in BT.656 mode. The OMAP3 requires the TVP5151 to start and stop streaming when requested. > > /* Initializes TVP5150 to its default values */ > /* # set PCLK (27MHz) */ > tvp5150_write(sd, TVP5150_CONF_SHARED_PIN, 0x00); > > + /* Output format: 8-bit ITU-R BT.656 with embedded syncs */ > if (enable) > - tvp5150_write(sd, TVP5150_MISC_CTL, val); > + tvp5150_write(sd, TVP5150_MISC_CTL, 0x09); > else > tvp5150_write(sd, TVP5150_MISC_CTL, 0x00); -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html