Re: [RESEND PATCH] media: vb2: Fix vb2_dc_prepare do not correct sync data to device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sakari,

On Tue, 2015-09-22 at 15:07 +0300, Sakari Ailus wrote:
> Hi Tiffany,
> 
> On Tue, Sep 22, 2015 at 06:19:25PM +0800, tiffany lin wrote:
> > Hi Hans,
> > 
> > On Mon, 2015-09-21 at 15:13 +0200, Hans Verkuil wrote:
> > > Hi Tiffany!
> > > 
> > > On 21-09-15 14:26, Tiffany Lin wrote:
> > > > vb2_dc_prepare use the number of SG entries dma_map_sg_attrs return.
> > > > But in dma_sync_sg_for_device, it use lengths of each SG entries
> > > > before dma_map_sg_attrs. dma_map_sg_attrs will concatenate
> > > > SGs until dma length > dma seg bundary. sgt->nents will less than
> > > > sgt->orig_nents. Using SG entries after dma_map_sg_attrs
> > > > in vb2_dc_prepare will make some SGs are not sync to device.
> > > > After add DMA_ATTR_SKIP_CPU_SYNC in vb2_dc_get_userptr to remove
> > > > sync data to device twice. Device randomly get incorrect data because
> > > > some SGs are not sync to device. Change to use number of SG entries
> > > > before dma_map_sg_attrs in vb2_dc_prepare to prevent this issue.
> > > > 
> > > > Signed-off-by: Tiffany Lin <tiffany.lin@xxxxxxxxxxxx>
> > > > ---
> > > >  drivers/media/v4l2-core/videobuf2-dma-contig.c | 4 ++--
> > > >  1 file changed, 2 insertions(+), 2 deletions(-)
> > > > 
> > > > diff --git a/drivers/media/v4l2-core/videobuf2-dma-contig.c b/drivers/media/v4l2-core/videobuf2-dma-contig.c
> > > > index 2397ceb..c5d00bd 100644
> > > > --- a/drivers/media/v4l2-core/videobuf2-dma-contig.c
> > > > +++ b/drivers/media/v4l2-core/videobuf2-dma-contig.c
> > > > @@ -100,7 +100,7 @@ static void vb2_dc_prepare(void *buf_priv)
> > > >  	if (!sgt || buf->db_attach)
> > > >  		return;
> > > >  
> > > > -	dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->nents, buf->dma_dir);
> > > > +	dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->orig_nents, buf->dma_dir);
> > > >  }
> > > >  
> > > >  static void vb2_dc_finish(void *buf_priv)
> > > > @@ -112,7 +112,7 @@ static void vb2_dc_finish(void *buf_priv)
> > > >  	if (!sgt || buf->db_attach)
> > > >  		return;
> > > >  
> > > > -	dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->nents, buf->dma_dir);
> > > > +	dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->orig_nents, buf->dma_dir);
> > > >  }
> > > 
> > > I don't really understand it. I am assuming that this happens on an arm and that
> > > the dma_map_sg_attrs and dma_sync_sg_* functions used are arm_iommu_map_sg() and
> > > arm_iommu_sync_sg_* as implemented in arch/arm/mm/dma-mapping.c.
> > > 
> > 
> > We are using __iommu_* implemented in "arch/arm64/mm/dma-mapping.c" in
> > review patch
> > http://lists.linuxfoundation.org/pipermail/iommu/2015-July/013898.html
> > Without patch "[media] vb2: use dma_map_sg_attrs to prevent unnecessary
> > sync", vb2 will sync data to device twice.
> > One is from "dma_map_sg" in "vb2_dc_get_userptr", the other is from
> > "dma_sync_sg_for_device" in "vb2_dc_prepare". dma_map_sg use orig_nents,
> > and dma_sync_sg_for_device use nents."
> > 
> > We do not run in 32bits mode, but check "arm_dma_sync_sg_for_device" in
> > "arch/arm/mm/dma-mapping.c", 
> > ops->sync_single_for_device(dev, sg_dma_address(s), s->length, dir);
> > It looks like has same issue.
> > 
> > > Now, as I understand it (and my understanding may very well be flawed!) the map_sg
> > > function concatenates SG entries if possible, so it may return fewer entries. But
> > > the dma_sync_sg functions use those updated SG entries, so the full buffer should
> > > be covered by this. Using orig_nents will actually sync parts of the buffer twice!
> > > The first nents entries already cover the full buffer so any remaining entries up
> > > to orig_nents will just duplicate parts of the buffer.
> > > 
> > I found that in __iommu_sync_sg_for_device, it use sg->length , do not
> > cover full buffer.
> > By adding log in " __iommu_sync_sg_for_device" without patch "[media]
> > vb2: use dma_map_sg_attrs to prevent unnecessary sync", we could see
> > total synced size are different between called from dma_map_sg and
> > dma_sync_sg_for_device.
> 
> I had the same question Hans did, but I still fail to understand where in
> the code things are going wrong the way you described at the moment ---
> after dma_map_sg() there are nents entries in the scatterlist. But.
> sg_dma_len() should be used instead of the length field to get the size of
> the entry. If something is wrong, then it's this AFAICT.
> 
> Could you try whether changing this fixes it?
> 
Do you mean try to change to use sg_dma_len in
__iommu_sync_sg_for_device?

I tried to change using sg_dam_len() in __iommu_sync_sg_for_device
	for_each_sg(sgl, sg, nelems, i) {
		//__dma_map_area(sg_virt(sg), sg->length, dir);
		__dma_map_area(sg_virt(sg), sg_dma_len(sg), dir);
	}

I still see the issue. Probably there are some other issue in
iommu_dma_map_sg.

The __iommu_sync_sg_for_device could be called before and after
iommu_dma_map_sg called.
I am not sure whether there is any side effect change it to
sg_dma_len(sg)

> > __iommu_sync_sg_for_device called from dma_sync_sg_for_device got
> > updated SG entries number but it use un-updated sg length.
> > After using "DMA_ATTR_SKIP_CPU_SYNC" to skip sync in vb2_dc_get_userptr,
> > we got some part of the buffer not sync.
> > 
> > > So this patch makes no sense in the current code.
> > > 
> > > If I understand your log text correctly this patch goes on top of Sakari Ailus' vb2
> > > sync patch series. So if it wasn't needed before, but it is needed after his patch
> > > series, then the problem is in that patch series.
> > > 
> > This patch goes on top of these two patchs
> > https://www.mail-archive.com/linux-media%40vger.kernel.org/msg82143.html
> 
> This patch has been merged long time ago.
> 
> > http://lists.linuxfoundation.org/pipermail/iommu/2015-July/013898.html
> > 
> > 
> > > In any case, I need some help understanding this patch.
> > > 
> > > And *if* this patch is correct, then the same thing should likely be done for
> > > videobuf2-dma-sg.c.
> > > 
> > Yes, if this patch correct, same thing should be done for
> > videobuf2-dma-sg.c
> > > Regards,
> > > 
> > > 	Hans
> > > 
> > > >  
> > > >  /*********************************************/
> > > > 
> > 
> > 
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux