On 08/28/2015 09:59 AM, Hans Verkuil wrote: > On 08/26/2015 03:23 PM, Steven Toth wrote: >>>>>> Has anyone tested the patch and validated each of the controls continue to work? >>>>> >>>>> As I said: my saa7146 card is no longer recognized (not sure why), so I was hoping >>>>> you could test it. >>>> >>>> OK, will do. I probably won't get to this until the weekend, but I'll >>>> put this on my todo list. >>> >>> That's OK, there is no hurry. I tried to put my saa7164 in a different PC as well, >>> but it seems to be really broken as nothing appears in lspci :-( >> >> Send me your shipping address _privately_, I talk to Hauppauge about a >> replacement. >> > > No need, I managed to get it working if I use a PCI-to-PCIe adapter card. Very > strange, it won't work in the PCIe slot of my motherboard, but using the PCI slot > and that adapter it works fine. > > It's good that it was tested since the menu control creation code was wrong. > > One thing that is very confusing to me: I have this board: > > [ 1878.280918] CORE saa7164[0]: subsystem: 0070:8900, board: Hauppauge WinTV-HVR2200 [card=5,autodetected] > [ 1878.280928] saa7164[0]/0: found at 0000:09:00.0, rev: 129, irq: 18, latency: 0, mmio: 0xfb800000 > [ 1878.327399] tveeprom 14-0000: Hauppauge model 89519, rev B2F2, serial# 4029789519 > [ 1878.327405] tveeprom 14-0000: MAC address is 00:0d:fe:31:b5:4f > [ 1878.327409] tveeprom 14-0000: tuner model is NXP 18271C2_716x (idx 152, type 4) > [ 1878.327413] tveeprom 14-0000: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc) > [ 1878.327416] tveeprom 14-0000: audio processor is SAA7164 (idx 43) > [ 1878.327418] tveeprom 14-0000: decoder processor is CX23887A (idx 39) > [ 1878.327420] tveeprom 14-0000: has radio > [ 1878.327423] saa7164[0]: Hauppauge eeprom: model=89519 > > but the default firmware with size 4919072 fails to work (image corrupt), instead > I need to use the firmware with size 4038864 (v4l-saa7164-1.0.3-3.fw). That's v4l-saa7164-1.0.2-3.fw, sorry for the confusion. Googling suggests that you have patches for this that never made it upstream. Can you post it? Regards, Hans > > For that I have to patch the driver. > > Do you have an overview of which firmware is for which board? > > There are a bunch of firmwares here: > > http://www.steventoth.net/linux/hvr22xx/firmwares > > but there are no instructions or an overview of which should be used. > > I faintly remember asking you this before, but that's been a long time ago > and I can't find it in my mail archive. > > I'm willing to do some driver cleanup and fix v4l2-compliance issues, but > I'd really like to fix this firmware issue first. > > Regards, > > Hans > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
