On 08/26/2015 03:23 PM, Steven Toth wrote: >>>>> Has anyone tested the patch and validated each of the controls continue to work? >>>> >>>> As I said: my saa7146 card is no longer recognized (not sure why), so I was hoping >>>> you could test it. >>> >>> OK, will do. I probably won't get to this until the weekend, but I'll >>> put this on my todo list. >> >> That's OK, there is no hurry. I tried to put my saa7164 in a different PC as well, >> but it seems to be really broken as nothing appears in lspci :-( > > Send me your shipping address _privately_, I talk to Hauppauge about a > replacement. > No need, I managed to get it working if I use a PCI-to-PCIe adapter card. Very strange, it won't work in the PCIe slot of my motherboard, but using the PCI slot and that adapter it works fine. It's good that it was tested since the menu control creation code was wrong. One thing that is very confusing to me: I have this board: [ 1878.280918] CORE saa7164[0]: subsystem: 0070:8900, board: Hauppauge WinTV-HVR2200 [card=5,autodetected] [ 1878.280928] saa7164[0]/0: found at 0000:09:00.0, rev: 129, irq: 18, latency: 0, mmio: 0xfb800000 [ 1878.327399] tveeprom 14-0000: Hauppauge model 89519, rev B2F2, serial# 4029789519 [ 1878.327405] tveeprom 14-0000: MAC address is 00:0d:fe:31:b5:4f [ 1878.327409] tveeprom 14-0000: tuner model is NXP 18271C2_716x (idx 152, type 4) [ 1878.327413] tveeprom 14-0000: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc) [ 1878.327416] tveeprom 14-0000: audio processor is SAA7164 (idx 43) [ 1878.327418] tveeprom 14-0000: decoder processor is CX23887A (idx 39) [ 1878.327420] tveeprom 14-0000: has radio [ 1878.327423] saa7164[0]: Hauppauge eeprom: model=89519 but the default firmware with size 4919072 fails to work (image corrupt), instead I need to use the firmware with size 4038864 (v4l-saa7164-1.0.3-3.fw). For that I have to patch the driver. Do you have an overview of which firmware is for which board? There are a bunch of firmwares here: http://www.steventoth.net/linux/hvr22xx/firmwares but there are no instructions or an overview of which should be used. I faintly remember asking you this before, but that's been a long time ago and I can't find it in my mail archive. I'm willing to do some driver cleanup and fix v4l2-compliance issues, but I'd really like to fix this firmware issue first. Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
