We've had a dozen or two of these cards through our lab and the labels on the card aren't 100% reliable; we've seen both HVR-2250 labelled as HVR-2255 and vice versa. Jake -----Original Message----- From: linux-media-owner@xxxxxxxxxxxxxxx [mailto:linux-media-owner@xxxxxxxxxxxxxxx] On Behalf Of Olli Salonen Sent: June-10-15 2:57 PM To: Jeff Allen Cc: linux-media Subject: Re: Hauppauge 2250 on Ubuntu 15.04 Hi Jeff, Based on the PCI subsystem ID I think your card is actually HVR-2255 and not the older HVR-2250. Check what it says on the card. Some people have reported buying a HVR-2250, but receiving actually a HVR-2255. Anyway, HVR-2255 is supported by the media_tree these days, but you need to build the driver yourself before kernel 4.2 is out. Follow the steps here to do that: http://git.linuxtv.org/cgit.cgi/media_build.git/about/ Cheers, -olli On 10 June 2015 at 19:23, Jeff Allen <worthspending@xxxxxxxxx> wrote: > I am trying to get the firmware to load on a fresh install of Ubuntu > 15.04 desktop 64-bit on a new system. > > uname -a > Linux 3.19.0-15-generic #15-Ubuntu SMP Thu Apr 16 23:32:37 UTC 2015 > x86_64 > x86_64 x86_64 GNU/Linux > > lshw > description: Computer > width: 64 bits > capabilities: smbios-2.7 vsyscall32 > *-core > description: Motherboard > physical id: 0 > *-memory > description: System memory > physical id: 0 > size: 7884MiB > *-cpu > product: AMD FX(tm)-8320 Eight-Core Processor > vendor: Advanced Micro Devices [AMD] > physical id: 1 > bus info: cpu@0 > size: 1400MHz > capacity: 3500MHz > width: 64 bits > capabilities: fpu fpu_exception wp vme de pse tsc msr pae > mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 > ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 constant_tsc > rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor > ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm > cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch > osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext > perfctr_core perfctr_nb arat cpb hw_pstate npt lbrv svm_lock nrip_save > tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold > vmmcall bmi1 cpufreq > > I have tried for a few hours now. Many combinations / suggestions > from the documentation, forum posts, etc. The most recent attempts > were made with another fresh install of Ubuntu 15.04 and following the > instructions at the following link: > http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-2250 > > Here is what I did on my last attempt after the fresh install. > > sudo lshw -C multimedia > *-multimedia > description: Multimedia controller > product: SAA7164 > vendor: Philips Semiconductors > physical id: 0 > bus info: pci@0000:05:00.0 > version: 81 > width: 64 bits > clock: 33MHz > capabilities: msi pciexpress pm bus_master cap_list > configuration: driver=saa7164 latency=0 > resources: irq:47 memory:fe000000-fe3fffff > memory:fdc00000-fdffffff > > dmesg | grep 7164 > > [ 0.000000] On node 0 totalpages: 2071641 > [ 0.530288] pci 0000:05:00.0: [1131:7164] type 00 class 0x048000 > [ 5.977865] saa7164 driver loaded > [ 5.977973] saa7164[0]: Your board isn't known (yet) to the driver. > saa7164[0]: Try to pick one of the existing card configs via > saa7164[0]: card=<n> insmod option. Updating to the latest > saa7164[0]: version might help as well. > [ 5.977976] saa7164[0]: Here are valid choices for the card=<n> insmod > option: > [ 5.977977] saa7164[0]: card=0 -> Unknown > [ 5.977978] saa7164[0]: card=1 -> Generic Rev2 > [ 5.977979] saa7164[0]: card=2 -> Generic Rev3 > [ 5.977981] saa7164[0]: card=3 -> Hauppauge WinTV-HVR2250 > [ 5.977981] saa7164[0]: card=4 -> Hauppauge WinTV-HVR2200 > [ 5.977982] saa7164[0]: card=5 -> Hauppauge WinTV-HVR2200 > [ 5.977983] saa7164[0]: card=6 -> Hauppauge WinTV-HVR2200 > [ 5.977984] saa7164[0]: card=7 -> Hauppauge WinTV-HVR2250 > [ 5.977985] saa7164[0]: card=8 -> Hauppauge WinTV-HVR2250 > [ 5.977986] saa7164[0]: card=9 -> Hauppauge WinTV-HVR2200 > [ 5.977987] saa7164[0]: card=10 -> Hauppauge WinTV-HVR2200 > [ 5.978018] CORE saa7164[0]: subsystem: 0070:f111, board: Unknown > [card=0,autodetected] > [ 5.978021] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47, > latency: 0, mmio: 0xfe000000 > [ 5.978037] saa7164_initdev() Unsupported board detected, registering > without firmware > > > - created a file at: /etc/modprobe.d/saa7164.conf with the following > contents > > options saa7164 card=8 > > - downloaded the firmware and copied it to /lib/firmware > > wget > http://www.steventoth.net/linux/hvr22xx/firmwares/4019072/NXP7164-2010-03-10.1.fw > cp *.fw /lib/firmware > > - reboot > > - after reboot > > dmesg | grep 7164 > > [ 0.000000] On node 0 totalpages: 2071641 > [ 0.530265] pci 0000:05:00.0: [1131:7164] type 00 class 0x048000 > [ 1.571643] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: > dm-devel@xxxxxxxxxx > [ 6.584365] saa7164 driver loaded > [ 6.584503] CORE saa7164[0]: subsystem: 0070:f111, board: Hauppauge > WinTV-HVR2250 [card=8,insmod option] > [ 6.584506] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47, > latency: 0, mmio: 0xfe000000 > [ 6.758475] saa7164_downloadfirmware() no first image > [ 6.758483] saa7164_downloadfirmware() Waiting for firmware upload > (NXP7164-2010-03-10.1.fw) > [ 6.836305] saa7164 0000:05:00.0: Direct firmware load for > NXP7164-2010-03-10.1.fw failed with error -2 > [ 6.836309] saa7164_downloadfirmware() Upload failed. (file not found?) > [ 0.000000] On node 0 totalpages: 2071641 > [ 0.530263] pci 0000:05:00.0: [1131:7164] type 00 class 0x048000 > [ 6.372707] saa7164 driver loaded > [ 6.372835] CORE saa7164[0]: subsystem: 0070:f111, board: Hauppauge > WinTV-HVR2250 [card=8,insmod option] > [ 6.372838] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47, > latency: 0, mmio: 0xfe000000 > [ 6.530496] saa7164_downloadfirmware() no first image > [ 6.530505] saa7164_downloadfirmware() Waiting for firmware upload > (NXP7164-2010-03-10.1.fw) > [ 6.899014] saa7164_downloadfirmware() firmware read 4019072 bytes. > [ 6.899017] saa7164_downloadfirmware() firmware loaded. > [ 6.899022] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072 > [ 6.899027] saa7164_downloadfirmware() FirmwareSize = 0x1fd6 > [ 6.899028] saa7164_downloadfirmware() BSLSize = 0x0 > [ 6.899029] saa7164_downloadfirmware() Reserved = 0x0 > [ 6.899030] saa7164_downloadfirmware() Version = 0x1661c00 > [ 13.650943] saa7164_downloadimage() Image downloaded, booting... > [ 13.754950] saa7164_downloadimage() Image booted successfully. > [ 16.395094] saa7164_downloadimage() Image downloaded, booting... > [ 18.267203] saa7164_downloadimage() Image booted successfully. > [ 18.316076] saa7164[0]: Warning: Unknown Hauppauge model #0 > [ 18.316078] saa7164[0]: Hauppauge eeprom: model=0 > [ 18.380192] saa7164_dvb_register() Frontend initialization failed > [ 18.380195] saa7164_initdev() Failed to register dvb adapters on porta > [ 18.383340] saa7164_api_i2c_read() error, ret(2) = 0x9 > [ 18.383347] saa7164_dvb_register() Frontend initialization failed > [ 18.383348] saa7164_initdev() Failed to register dvb adapters on portb > [ 18.383411] saa7164[0]: registered device video0 [mpeg] > [ 18.618462] saa7164[0]: registered device video1 [mpeg] > [ 18.834041] saa7164[0]: registered device vbi0 [vbi] > [ 18.834087] saa7164[0]: registered device vbi1 [vbi] > [ 18.848471] Modules linked in: s5h1411 amdkfd amd_iommu_v2 kvm_amd > snd_hda_codec_realtek kvm radeon snd_hda_codec_gen eric > crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel ttm > drm_kms_helper snd_hda_codec_hdmi aes_x86_64 drm snd_hda_intel > snd_hda_controller saa7164 i2c_algo_bit snd_hda_codec eeepc_wmi lrw > gf128mul tveeprom asus_wmi glue_helper dvb_core sparse_keymap > snd_hwdep v4l2_common video snd_pcm mxm_wmi snd_seq_midi > snd_seq_midi_event ablk_helper snd_rawm idi videodev snd_seq > snd_seq_device media snd_timer wmi snd serio_raw soundcore shpchp > 8250_fintek cryptd fam15h_power k 10temp edac_core i2c_piix4 > tpm_infineon > > > - edited /etc/modprobe.d/saa7164.conf > changed card=8 to card=7 > > - rebooted again > > dmesg | grep 7164 > > [ 0.000000] On node 0 totalpages: 2071641 > [ 0.530051] pci 0000:05:00.0: [1131:7164] type 00 class 0x048000 > [ 7.009868] saa7164 driver loaded > [ 7.010007] CORE saa7164[0]: subsystem: 0070:f111, board: Hauppauge > WinTV-HVR2250 [card=7,insmod option] > [ 7.010010] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47, > latency: 0, mmio: 0xfe000000 > [ 7.178353] saa7164_downloadfirmware() no first image > [ 7.178365] saa7164_downloadfirmware() Waiting for firmware upload > (NXP7164-2010-03-10.1.fw) > [ 7.561231] saa7164_downloadfirmware() firmware read 4019072 bytes. > [ 7.561237] saa7164_downloadfirmware() firmware loaded. > [ 7.561251] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072 > [ 7.561258] saa7164_downloadfirmware() FirmwareSize = 0x1fd6 > [ 7.561260] saa7164_downloadfirmware() BSLSize = 0x0 > [ 7.561262] saa7164_downloadfirmware() Reserved = 0x0 > [ 7.561264] saa7164_downloadfirmware() Version = 0x1661c00 > [ 14.310760] saa7164_downloadimage() Image downloaded, booting... > [ 14.414757] saa7164_downloadimage() Image booted successfully. > [ 17.054898] saa7164_downloadimage() Image downloaded, booting... > [ 18.927006] saa7164_downloadimage() Image booted successfully. > [ 18.971706] tveeprom 10-0000: audio processor is SAA7164 (idx 43) > [ 18.971707] tveeprom 10-0000: decoder processor is SAA7164 (idx 40) > [ 18.971709] saa7164[0]: Warning: Unknown Hauppauge model #151061 > [ 18.971711] saa7164[0]: Hauppauge eeprom: model=151061 > [ 19.025745] saa7164_dvb_register() Frontend initialization failed > [ 19.025748] saa7164_initdev() Failed to register dvb adapters on porta > [ 19.028551] saa7164_dvb_register() Frontend initialization failed > [ 19.028554] saa7164_initdev() Failed to register dvb adapters on portb > [ 19.028614] saa7164[0]: registered device video0 [mpeg] > [ 19.263763] saa7164[0]: registered device video1 [mpeg] > [ 19.476734] saa7164[0]: registered device vbi0 [vbi] > [ 19.476775] saa7164[0]: registered device vbi1 [vbi] > [ 19.485472] Modules linked in: s5h1411 amdkfd amd_iommu_v2 radeon ttm > snd_hda_codec_realtek snd_hda_codec_generic drm _kms_helper > snd_hda_codec_hdmi snd_hda_intel drm snd_hda_controller snd_hda_codec > saa7164 snd_hwdep kvm_amd snd_pcm kvm tveeprom dvb_core snd_seq_midi > v4l2_common snd_seq_midi_event snd_rawmidi eeepc_wmi crct10dif_pclmul > crc32_pclmul asus_w mi ghash_clmulni_intel snd_seq videodev > sparse_keymap media snd_seq_device i2c_algo_bit aesni_intel snd_timer > snd video > aes_x86_64 mxm_wmi lrw gf128mul glue_helper ablk_helper wmi soundcore > k10temp cryptd edac_core shpchp tpm_infineon 8250_ fintek serio_raw > i2c_piix4 fam15h_power edac_mce_amd mac_hid parport_pc ppdev lp > parport autofs4 hid_generic usbhid hid firewire_ohci psmouse > firewire_core ahci crc_itu_t r8169 libahci mii > > > Any help would be deeply appreciated. > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" > in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo > info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html ��.n��������+%������w��{.n�����{��g����^n�r������&��z�ޗ�zf���h���~����������_��+v���)ߣ�
