I am trying to get the firmware to load on a fresh install of Ubuntu
15.04 desktop 64-bit on a new system.
uname -a
Linux 3.19.0-15-generic #15-Ubuntu SMP Thu Apr 16 23:32:37 UTC 2015
x86_64 x86_64 x86_64 GNU/Linux
lshw
description: Computer
width: 64 bits
capabilities: smbios-2.7 vsyscall32
*-core
description: Motherboard
physical id: 0
*-memory
description: System memory
physical id: 0
size: 7884MiB
*-cpu
product: AMD FX(tm)-8320 Eight-Core Processor
vendor: Advanced Micro Devices [AMD]
physical id: 1
bus info: cpu@0
size: 1400MHz
capacity: 3500MHz
width: 64 bits
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce
cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht
syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 constant_tsc rep_good
nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma
cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm
extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop
skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core perfctr_nb
arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean
flushbyasid decodeassists pausefilter pfthreshold vmmcall bmi1 cpufreq
I have tried for a few hours now. Many combinations / suggestions from
the documentation, forum posts, etc. The most recent attempts were made
with another fresh install of Ubuntu 15.04 and following the
instructions at the following link:
http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-2250
Here is what I did on my last attempt after the fresh install.
sudo lshw -C multimedia
*-multimedia
description: Multimedia controller
product: SAA7164
vendor: Philips Semiconductors
physical id: 0
bus info: pci@0000:05:00.0
version: 81
width: 64 bits
clock: 33MHz
capabilities: msi pciexpress pm bus_master cap_list
configuration: driver=saa7164 latency=0
resources: irq:47 memory:fe000000-fe3fffff memory:fdc00000-fdffffff
dmesg | grep 7164
[ 0.000000] On node 0 totalpages: 2071641
[ 0.530288] pci 0000:05:00.0: [1131:7164] type 00 class 0x048000
[ 5.977865] saa7164 driver loaded
[ 5.977973] saa7164[0]: Your board isn't known (yet) to the driver.
saa7164[0]: Try to pick one of the existing card configs via
saa7164[0]: card=<n> insmod option. Updating to the latest
saa7164[0]: version might help as well.
[ 5.977976] saa7164[0]: Here are valid choices for the card=<n>
insmod option:
[ 5.977977] saa7164[0]: card=0 -> Unknown
[ 5.977978] saa7164[0]: card=1 -> Generic Rev2
[ 5.977979] saa7164[0]: card=2 -> Generic Rev3
[ 5.977981] saa7164[0]: card=3 -> Hauppauge WinTV-HVR2250
[ 5.977981] saa7164[0]: card=4 -> Hauppauge WinTV-HVR2200
[ 5.977982] saa7164[0]: card=5 -> Hauppauge WinTV-HVR2200
[ 5.977983] saa7164[0]: card=6 -> Hauppauge WinTV-HVR2200
[ 5.977984] saa7164[0]: card=7 -> Hauppauge WinTV-HVR2250
[ 5.977985] saa7164[0]: card=8 -> Hauppauge WinTV-HVR2250
[ 5.977986] saa7164[0]: card=9 -> Hauppauge WinTV-HVR2200
[ 5.977987] saa7164[0]: card=10 -> Hauppauge WinTV-HVR2200
[ 5.978018] CORE saa7164[0]: subsystem: 0070:f111, board: Unknown
[card=0,autodetected]
[ 5.978021] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47,
latency: 0, mmio: 0xfe000000
[ 5.978037] saa7164_initdev() Unsupported board detected, registering
without firmware
- created a file at: /etc/modprobe.d/saa7164.conf with the following
contents
options saa7164 card=8
- downloaded the firmware and copied it to /lib/firmware
wget
http://www.steventoth.net/linux/hvr22xx/firmwares/4019072/NXP7164-2010-03-10.1.fw
cp *.fw /lib/firmware
- reboot
- after reboot
dmesg | grep 7164
[ 0.000000] On node 0 totalpages: 2071641
[ 0.530265] pci 0000:05:00.0: [1131:7164] type 00 class 0x048000
[ 1.571643] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28)
initialised: dm-devel@xxxxxxxxxx
[ 6.584365] saa7164 driver loaded
[ 6.584503] CORE saa7164[0]: subsystem: 0070:f111, board: Hauppauge
WinTV-HVR2250 [card=8,insmod option]
[ 6.584506] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47,
latency: 0, mmio: 0xfe000000
[ 6.758475] saa7164_downloadfirmware() no first image
[ 6.758483] saa7164_downloadfirmware() Waiting for firmware upload
(NXP7164-2010-03-10.1.fw)
[ 6.836305] saa7164 0000:05:00.0: Direct firmware load for
NXP7164-2010-03-10.1.fw failed with error -2
[ 6.836309] saa7164_downloadfirmware() Upload failed. (file not found?)
[ 0.000000] On node 0 totalpages: 2071641
[ 0.530263] pci 0000:05:00.0: [1131:7164] type 00 class 0x048000
[ 6.372707] saa7164 driver loaded
[ 6.372835] CORE saa7164[0]: subsystem: 0070:f111, board: Hauppauge
WinTV-HVR2250 [card=8,insmod option]
[ 6.372838] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47,
latency: 0, mmio: 0xfe000000
[ 6.530496] saa7164_downloadfirmware() no first image
[ 6.530505] saa7164_downloadfirmware() Waiting for firmware upload
(NXP7164-2010-03-10.1.fw)
[ 6.899014] saa7164_downloadfirmware() firmware read 4019072 bytes.
[ 6.899017] saa7164_downloadfirmware() firmware loaded.
[ 6.899022] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072
[ 6.899027] saa7164_downloadfirmware() FirmwareSize = 0x1fd6
[ 6.899028] saa7164_downloadfirmware() BSLSize = 0x0
[ 6.899029] saa7164_downloadfirmware() Reserved = 0x0
[ 6.899030] saa7164_downloadfirmware() Version = 0x1661c00
[ 13.650943] saa7164_downloadimage() Image downloaded, booting...
[ 13.754950] saa7164_downloadimage() Image booted successfully.
[ 16.395094] saa7164_downloadimage() Image downloaded, booting...
[ 18.267203] saa7164_downloadimage() Image booted successfully.
[ 18.316076] saa7164[0]: Warning: Unknown Hauppauge model #0
[ 18.316078] saa7164[0]: Hauppauge eeprom: model=0
[ 18.380192] saa7164_dvb_register() Frontend initialization failed
[ 18.380195] saa7164_initdev() Failed to register dvb adapters on porta
[ 18.383340] saa7164_api_i2c_read() error, ret(2) = 0x9
[ 18.383347] saa7164_dvb_register() Frontend initialization failed
[ 18.383348] saa7164_initdev() Failed to register dvb adapters on portb
[ 18.383411] saa7164[0]: registered device video0 [mpeg]
[ 18.618462] saa7164[0]: registered device video1 [mpeg]
[ 18.834041] saa7164[0]: registered device vbi0 [vbi]
[ 18.834087] saa7164[0]: registered device vbi1 [vbi]
[ 18.848471] Modules linked in: s5h1411 amdkfd amd_iommu_v2 kvm_amd
snd_hda_codec_realtek kvm radeon snd_hda_codec_gen
eric crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel ttm
drm_kms_helper snd_hda_codec_hdmi aes_x86_64 drm
snd_hda_intel snd_hda_controller saa7164 i2c_algo_bit snd_hda_codec
eeepc_wmi lrw gf128mul tveeprom asus_wmi glue_helper
dvb_core sparse_keymap snd_hwdep v4l2_common video snd_pcm mxm_wmi
snd_seq_midi snd_seq_midi_event ablk_helper snd_rawm
idi videodev snd_seq snd_seq_device media snd_timer wmi snd serio_raw
soundcore shpchp 8250_fintek cryptd fam15h_power k
10temp edac_core i2c_piix4 tpm_infineon
- edited /etc/modprobe.d/saa7164.conf
changed card=8 to card=7
- rebooted again
dmesg | grep 7164
[ 0.000000] On node 0 totalpages: 2071641
[ 0.530051] pci 0000:05:00.0: [1131:7164] type 00 class 0x048000
[ 7.009868] saa7164 driver loaded
[ 7.010007] CORE saa7164[0]: subsystem: 0070:f111, board: Hauppauge
WinTV-HVR2250 [card=7,insmod option]
[ 7.010010] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 47,
latency: 0, mmio: 0xfe000000
[ 7.178353] saa7164_downloadfirmware() no first image
[ 7.178365] saa7164_downloadfirmware() Waiting for firmware upload
(NXP7164-2010-03-10.1.fw)
[ 7.561231] saa7164_downloadfirmware() firmware read 4019072 bytes.
[ 7.561237] saa7164_downloadfirmware() firmware loaded.
[ 7.561251] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072
[ 7.561258] saa7164_downloadfirmware() FirmwareSize = 0x1fd6
[ 7.561260] saa7164_downloadfirmware() BSLSize = 0x0
[ 7.561262] saa7164_downloadfirmware() Reserved = 0x0
[ 7.561264] saa7164_downloadfirmware() Version = 0x1661c00
[ 14.310760] saa7164_downloadimage() Image downloaded, booting...
[ 14.414757] saa7164_downloadimage() Image booted successfully.
[ 17.054898] saa7164_downloadimage() Image downloaded, booting...
[ 18.927006] saa7164_downloadimage() Image booted successfully.
[ 18.971706] tveeprom 10-0000: audio processor is SAA7164 (idx 43)
[ 18.971707] tveeprom 10-0000: decoder processor is SAA7164 (idx 40)
[ 18.971709] saa7164[0]: Warning: Unknown Hauppauge model #151061
[ 18.971711] saa7164[0]: Hauppauge eeprom: model=151061
[ 19.025745] saa7164_dvb_register() Frontend initialization failed
[ 19.025748] saa7164_initdev() Failed to register dvb adapters on porta
[ 19.028551] saa7164_dvb_register() Frontend initialization failed
[ 19.028554] saa7164_initdev() Failed to register dvb adapters on portb
[ 19.028614] saa7164[0]: registered device video0 [mpeg]
[ 19.263763] saa7164[0]: registered device video1 [mpeg]
[ 19.476734] saa7164[0]: registered device vbi0 [vbi]
[ 19.476775] saa7164[0]: registered device vbi1 [vbi]
[ 19.485472] Modules linked in: s5h1411 amdkfd amd_iommu_v2 radeon ttm
snd_hda_codec_realtek snd_hda_codec_generic drm
_kms_helper snd_hda_codec_hdmi snd_hda_intel drm snd_hda_controller
snd_hda_codec saa7164 snd_hwdep kvm_amd snd_pcm kvm
tveeprom dvb_core snd_seq_midi v4l2_common snd_seq_midi_event
snd_rawmidi eeepc_wmi crct10dif_pclmul crc32_pclmul asus_w
mi ghash_clmulni_intel snd_seq videodev sparse_keymap media
snd_seq_device i2c_algo_bit aesni_intel snd_timer snd video
aes_x86_64 mxm_wmi lrw gf128mul glue_helper ablk_helper wmi soundcore
k10temp cryptd edac_core shpchp tpm_infineon 8250_
fintek serio_raw i2c_piix4 fam15h_power edac_mce_amd mac_hid parport_pc
ppdev lp parport autofs4 hid_generic usbhid hid
firewire_ohci psmouse firewire_core ahci crc_itu_t r8169 libahci mii
Any help would be deeply appreciated.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
