Hello, I use kernel 3.13.0 and the media_build "4e1a67e4a6c8ab71f416ea32059c92171407ba5d". I get following messages by dmesg: [ 1543.444128] usb 2-4: new high-speed USB device number 4 using ehci-pci [ 1543.577069] usb 2-4: New USB device found, idVendor=0b48, idProduct=3014 [ 1543.577088] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1543.577098] usb 2-4: Product: TechnoTrend USB-Stick [ 1543.577106] usb 2-4: Manufacturer: CityCom GmbH [ 1543.577114] usb 2-4: SerialNumber: 20131128 [ 1543.764126] usb 2-4: dvb_usb_v2: found a 'TechnoTrend TVStick CT2-4400' in warm state [ 1543.764317] usb 2-4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 1543.764387] DVB: registering new adapter (TechnoTrend TVStick CT2-4400) [ 1543.765811] usb 2-4: dvb_usb_v2: MAC address: bc:ea:2b:44:02:7c [ 1543.772724] i2c i2c-2: Added multiplexed i2c bus 3 [ 1543.772734] si2168 2-0064: Silicon Labs Si2168 successfully attached [ 1543.777532] si2157 3-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 1543.777579] usb 2-4: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)... [ 1543.777824] Registered IR keymap rc-tt-1500 [ 1543.778051] input: TechnoTrend TVStick CT2-4400 as /devices/pci0000:00/0000:00:13.2/usb2/2-4/rc/rc0/input18 [ 1543.778368] rc0: TechnoTrend TVStick CT2-4400 as /devices/pci0000:00/0000:00:13.2/usb2/2-4/rc/rc0 [ 1543.778382] usb 2-4: dvb_usb_v2: schedule remote query interval to 300 msecs [ 1543.778396] usb 2-4: dvb_usb_v2: 'TechnoTrend TVStick CT2-4400' successfully initialized and connected I see no message about the firmware loading is this correct? -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
