Hi Jean-Michel, Am Montag, den 24.11.2014, 16:19 +0100 schrieb Jean-Michel Hautbois: > Hi, > > I am working on using the CSI bus of i.MX6 with a adv7611 chip. > I started to work with Steve Longerbeam's tree, and here is the > current tree I am using : > https://github.com/Vodalys/linux-2.6-imx/tree/mx6-camera-staging-v2-vbx > > This is a WiP tree, and not intended to be complete right now. > But at least, it should be possible to get a picture. > I will try to be as complete and synthetic as possible... > > Right now, I am configuring the ADV7611 in "16-Bit SDR ITU-R BT.656 > 4:2:2 Mode 0" (Table 73 in Appendix C of the Reference Manual). ITU-R BT.656 only specifies 8-bit (or 10-bit) streams, the 16-bit BT.656 SDR/DDR modes with two values on the bus at the same time are somewhat nonstandard. As far as I can tell, this mode should correspond to the CSI's BT.1120 SDR mode (Figure 37-20 in MX6DQ Reference Manual v1), so I'd expect CSI_SENS_CONF to be configured as DATA_WIDTH=1 (8-bit components), SENS_DATA_FORMAT=1 (YUV422), SENS_PRCTL=5 (progressive BT.1120 SDR). regards Philipp -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
