Hi,
I found at the site:
http://www.linuxtv.org/wiki/index.php/ATSC_PCIe_Cards that if I have a
TV-tuner card which is currently unsupported, you may help me how I can
make workable this device.
I have an Asus MyCinema EHD3-100/NAQ/FM/AV/MCE RC dual TV-Tuner card
with SAA7164 chipset.
My OS version is:
~# lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 14.04.1 LTS
Release: 14.04
Codename: trusty
grep for saa7164:
~# dmesg | grep saa
[ 12.564005] saa7164 driver loaded
[ 12.564142] saa7164[0]: Your board isn't known (yet) to the driver.
[ 12.564142] saa7164[0]: Try to pick one of the existing card configs via
[ 12.564142] saa7164[0]: card=<n> insmod option. Updating to the latest
[ 12.564142] saa7164[0]: version might help as well.
[ 12.564248] saa7164[0]: Here are valid choicesfor the card=<n>
insmod option:
[ 12.564277] saa7164[0]: card=0 -> Unknown
[ 12.564295] saa7164[0]: card=1 -> Generic Rev2
[ 12.564315] saa7164[0]: card=2 -> Generic Rev3
[ 12.564334] saa7164[0]: card=3 -> Hauppauge WinTV-HVR2250
[ 12.564357] saa7164[0]: card=4 -> Hauppauge WinTV-HVR2200
[ 12.564380] saa7164[0]: card=5 -> Hauppauge WinTV-HVR2200
[ 12.564403] saa7164[0]: card=6 -> Hauppauge WinTV-HVR2200
[ 12.564427] saa7164[0]: card=7 -> Hauppauge WinTV-HVR2250
[ 12.564450] saa7164[0]: card=8 -> Hauppauge WinTV-HVR2250
[ 12.564473] saa7164[0]: card=9 -> Hauppauge WinTV-HVR2200
[ 12.564496] saa7164[0]: card=10 -> Hauppauge WinTV-HVR2200
[ 12.565287] CORE saa7164[0]: subsystem: 1043:48cb, board: Unknown
[card=0,autodetected]
[ 12.565291] saa7164[0]/0: found at 0000:03:00.0, rev: 129, irq: 16,
latency: 0, mmio: 0xfe400000
[ 12.565302] saa7164_initdev() Unsupported board detected, registering
without firmware
My TV-Tuner detected parameters:
~# lspci -vvv
...
03:00.0 Multimedia controller: Philips Semiconductors SAA7164 (rev 81)
Subsystem: ASUSTeK Computer Inc. Device 48cb
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at fe000000 (64-bit, non-prefetchable) [size=4M]
Capabilities: [40] MSI: Enable- Count=1/16 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [50] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<256ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x2, ASPM L0s L1,
Exit Latency L0s <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
Capabilities: [74] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [7c] Vendor Specific Information: Len=84 <?>
Capabilities: [100 v1] Vendor Specific Information: ID=0000
Rev=0 Len=060 <?>
Capabilities: [160 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Kernel driver in use: saa7164
...
Currently I use KDE4 (installed from the original Ubuntu 14.04
distribution).
If you need any other parameters to detect my device, please write me
some instructions how can I get it from my system.
I am software developer so if you have any instructions how can I turn
on the TV on my computer with this TV-Tuner, please contact me.
Thank you in advance.
Regards,
Zsolt
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
