Hi guys,
I'm new here and I have some problems with a TerraTec Cinergy T USB XE
DVB-T stick by german manufactor MAGIX on Arch Linux.
dmesg output when I plug the stick in:
[ 267.443420] usb 3-2: new high-speed USB device number 2 using ehci-pci
Here is what lsusb is saying about the stick:
Bus 003 Device 002: ID 0ccd:0095 TerraTec Electronic GmbH
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0ccd TerraTec Electronic GmbH
idProduct 0x0095
bcdDevice 2.00
iManufacturer 1 TerraTec
iProduct 2 Cinergy T USB XE Ver.2
iSerial 3 10012007
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
It looks like it is a Cinergy T USB XE Ver.2 stick with a different
USB ID (0095 instead of 0069).
I've tried to change the USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2 value
to 0x0095 in the file "dvb-usb-ids.h" and to recompile the package.
The stick was recognized then, but there were other errors when I
tried to use it in VLC. Is there something else which I have to do to
get the stick to work? Unfortunately I don't have the error logs
anymore, but if you need them I can reproduce it.
Best regards,
Maksym
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
