It is hard to read what's there, because it doesn't follow the
CodingStyle.
Add missing whitespaces to split function arguments.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
diff --git a/drivers/media/dvb-frontends/cx24110.c b/drivers/media/dvb-frontends/cx24110.c
index e78e7893e8aa..4f5c992afe67 100644
--- a/drivers/media/dvb-frontends/cx24110.c
+++ b/drivers/media/dvb-frontends/cx24110.c
@@ -192,28 +192,29 @@ static int cx24110_set_fec (struct cx24110_state* state, fe_code_rate_t fec)
if (fec > FEC_AUTO)
fec = FEC_AUTO;
- if (fec==FEC_AUTO) { /* (re-)establish AutoAcq behaviour */
- cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xdf);
+ if (fec == FEC_AUTO) { /* (re-)establish AutoAcq behaviour */
+ cx24110_writereg(state, 0x37, cx24110_readreg(state, 0x37) & 0xdf);
/* clear AcqVitDis bit */
- cx24110_writereg(state,0x18,0xae);
+ cx24110_writereg(state, 0x18, 0xae);
/* allow all DVB standard code rates */
- cx24110_writereg(state,0x05,(cx24110_readreg(state,0x05)&0xf0)|0x3);
+ cx24110_writereg(state, 0x05, (cx24110_readreg(state, 0x05) & 0xf0) | 0x3);
/* set nominal Viterbi rate 3/4 */
- cx24110_writereg(state,0x22,(cx24110_readreg(state,0x22)&0xf0)|0x3);
+ cx24110_writereg(state, 0x22, (cx24110_readreg(state, 0x22) & 0xf0) | 0x3);
/* set current Viterbi rate 3/4 */
- cx24110_writereg(state,0x1a,0x05); cx24110_writereg(state,0x1b,0x06);
+ cx24110_writereg(state, 0x1a, 0x05);
+ cx24110_writereg(state, 0x1b, 0x06);
/* set the puncture registers for code rate 3/4 */
return 0;
} else {
- cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x20);
+ cx24110_writereg(state, 0x37, cx24110_readreg(state, 0x37) | 0x20);
/* set AcqVitDis bit */
- if(rate[fec]>0) {
- cx24110_writereg(state,0x05,(cx24110_readreg(state,0x05)&0xf0)|rate[fec]);
+ if (rate[fec] > 0) {
+ cx24110_writereg(state, 0x05, (cx24110_readreg(state, 0x05) & 0xf0) | rate[fec]);
/* set nominal Viterbi rate */
- cx24110_writereg(state,0x22,(cx24110_readreg(state,0x22)&0xf0)|rate[fec]);
+ cx24110_writereg(state, 0x22, (cx24110_readreg(state, 0x22) & 0xf0) | rate[fec]);
/* set current Viterbi rate */
- cx24110_writereg(state,0x1a,g1[fec]);
- cx24110_writereg(state,0x1b,g2[fec]);
+ cx24110_writereg(state, 0x1a, g1[fec]);
+ cx24110_writereg(state, 0x1b, g2[fec]);
/* not sure if this is the right way: I always used AutoAcq mode */
} else
return -EOPNOTSUPP;
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
