[ 9.327707] saa7164 driver loaded [ 9.328739] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 19 [ 9.329585] CORE saa7164[0]: subsystem: 0070:8851, board: Hauppauge WinTV-HVR2250 [card=7,autodetected] [ 9.329592] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 19, latency: 0, mmio: 0xfe800000 [ 9.460023] saa7164_downloadfirmware() no first image [ 9.460034] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw) [ 9.684071] saa7164_downloadfirmware() firmware read 4019072 bytes. [ 9.684076] saa7164_downloadfirmware() firmware loaded. [ 9.684077] Firmware file header part 1: [ 9.684080] .FirmwareSize = 0x0 [ 9.684081] .BSLSize = 0x0 [ 9.684083] .Reserved = 0x3d538 [ 9.684084] .Version = 0x3 [ 9.684086] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072 [ 9.684092] saa7164_downloadfirmware() FirmwareSize = 0x1fd6 [ 9.684094] saa7164_downloadfirmware() BSLSize = 0x0 [ 9.684096] saa7164_downloadfirmware() Reserved = 0x0 [ 9.684098] saa7164_downloadfirmware() Version = 0x1661c00 [ 16.496685] saa7164_downloadimage() Image downloaded, booting... [ 16.600015] saa7164_downloadimage() Image booted successfully. [ 16.600040] starting firmware download(2) [ 19.166683] saa7164_downloadimage() Image downloaded, booting... [ 21.130015] saa7164_downloadimage() Image booted successfully. [ 21.130040] firmware download complete. [ 21.177186] tveeprom 1-0000: Hauppauge model 88061, rev C4F2, serial# [ 21.177193] tveeprom 1-0000: MAC address is 00:0d:fe:xx:xx:xx [ 21.177196] tveeprom 1-0000: tuner model is NXP 18271C2_716x (idx 152, type 4) [ 21.177200] tveeprom 1-0000: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88) [ 21.177203] tveeprom 1-0000: audio processor is SAA7164 (idx 43) [ 21.177205] tveeprom 1-0000: decoder processor is SAA7164 (idx 40) [ 21.177208] tveeprom 1-0000: has radio, has IR receiver, has no IR transmitter [ 21.177210] saa7164[0]: Hauppauge eeprom: model=88061 [ 21.544594] tda18271 2-0060: creating new instance [ 21.549445] TDA18271HD/C2 detected @ 2-0060 [ 21.781995] DVB: registering new adapter (saa7164) [ 21.782011] saa7164 0000:05:00.0: DVB: registering adapter 0 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)... [ 22.071439] tda18271 3-0060: creating new instance [ 22.075732] TDA18271HD/C2 detected @ 3-0060 [ 22.298139] tda18271: performing RF tracking filter calibration [ 24.573984] tda18271: RF tracking filter calibration complete [ 24.578058] DVB: registering new adapter (saa7164) [ 24.578074] saa7164 0000:05:00.0: DVB: registering adapter 1 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)... [ 24.579110] saa7164[0]: registered device video0 [mpeg] [ 24.809340] saa7164[0]: registered device video1 [mpeg] [ 25.020165] saa7164[0]: registered device vbi0 [vbi] [ 25.020333] saa7164[0]: registered device vbi1 [vbi] Kernel: 3.12.21-gentoo-r1 On Fri, Oct 31, 2014 at 8:55 AM, Kyle Sanderson <kyle.leet@xxxxxxxxx> wrote: > Hi All, > > So I've been using my tuner for a couple years now with tvheadend, > works great :-). However, eventually I encounter something like this > in my dmesg > > [585870.001641] saa7164_cmd_send() No free sequences > [585870.001645] saa7164_api_i2c_write() error, ret(1) = 0xc > [585870.001650] tda10048_writereg: writereg error (ret == -5) > [585870.024809] saa7164_cmd_send() No free sequences > [585870.024820] saa7164_api_i2c_read() error, ret(1) = 0xc > [585870.024826] tda10048_readreg: readreg error (ret == -5) > [585870.024838] saa7164_cmd_send() No free sequences > [585870.024843] saa7164_api_i2c_read() error, ret(1) = 0xc > [585870.024848] tda10048_readreg: readreg error (ret == -5) > [585870.024856] saa7164_cmd_send() No free sequences > [585870.024861] saa7164_api_i2c_write() error, ret(1) = 0xc > [585870.024866] tda10048_writereg: writereg error (ret == -5) > [585870.024878] saa7164_cmd_send() No free sequences > [585870.024883] saa7164_api_i2c_write() error, ret(1) = 0xc > > The result is the card stops accepting commands; won't tune to other > frequencies. Rebooting the box seems to resolve it. The time before > that starts occurring though varies wildly, usually when it's stormy > and the ATSC antenna starts cutting in and out (reflection off of the > tree). > > Is there another way I can get around doing that? would rmmod/insmod work? > > Looking on the Hauppage site it looks like they're still developing > drivers for it ( ftp://ftp.hauppauge.com/Support/HVR2250/ ). From > google-ing around, it looks like people are still using the firmware > that Steven Toth ripped in 2011. > > Any tips? I've tried a couple horrible kernel patches but didn't get anywhere. > Kyle. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
